Hukoro FL51334-PL-BK 4 Light Matte Black Modern/Contemporary LED Instruction Manual
- June 13, 2024
- Hukoro
Table of Contents
FL51334-PL-BK 4 Light Matte Black
Modern/Contemporary LED
Instruction Manual
ASSEMBLY INSTRUCTIONS
CAUTION
- Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.
- Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
If you need further assistance, please contact us by Email: customersupport@superiordecorinc.com
TOOLS REQUIRED
HARDWARE INCLUDED
*PARTS
SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE
EXPLODED PARTS
INSTALLATION
STEP 1
Attach the Fixture Finial onto fixture.
STEP 2
- Choose the length of the chain you need (Open the chain using a phillips screwdriver (not included) and pliers (not included)).
- Attach the end of the chain to the loop on the fixture.
STEP 3
(Open the chain using a phillips screwdriver Use the mounting screws to attach
the mounting unit to the junction box (not included).
ASSEMBLY INSTRUCTIONS (INSTALLATION)
STEP 4
- Pass the chain and the branch wires through the screw collar ring and canopy.
- Attach the end of the chain to the mounting unit.
- Feed the branch wires through the pipe nipple on the mounting unit
STEP 5
Make the electrical connection from the junction box (not included) to the
fixture. Connect the ground wire to the mounting unit using the preinstalled
green ground screw. Next, connect the live wire, neutral wire and ground wires
with the supplied wire nuts. Secure with electrical tape.
STEP 6
Secure the canopy to the mounting unit with the screw collar ring.
STEP 7
Install bulbs (not included)
