FORTIN 998341 2015 Chrysler 200 Push Button Remote Starters and Alarm Systems Installation Guide

: June 13, 2024
: FORTIN

Table of Contents

FORTIN 998341 2015 Chrysler 200 Push Button Remote Starters and Alarm
DESCRIPTION
WIRING CONNECTION
DECRYPTOR PROGRAMMING PROCEDURE
REMOTE STARTER FUNCTIONALITY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FORTIN 998341 2015 Chrysler 200 Push Button Remote Starters and Alarm

Systems

REGULAR, THAR-CHR7 & THAR-CHR6 INSTALLATION

Vehicle functions supported in this diagram (functional if equipped)

**| | | BYPASS**

FIRMWARE VERSION

68. [ 02 ]

MINIMUM

| To add the firmware version and the options, use the

FLASH LINK UPDATER or FLASH LINK MOBILE tool,

sold separately.

---|---|---|---|---

Parts required (Not included)

Parts required

included)

| (Not| Pièce(s) requise(s) (Non incluse(s))| PAGE
---|---|---|---
WIRE TO WIRE DIAGRAM | SCHÉMA DE BRANCHEMENTS FIL À FIL
| Page 4
THARNESS DIAGRAM | SCHÉMA DE BRANCHEMENTS HARNAIS EN T
THARNESS THAR-CHR7| 1x THAR-CHR7| 1x THAR-CHR7| Page 5
THARNESS THAR-CHR6| 1x THAR-CHR6| 1x THAR-CHR6| Page 6

MANDATORY INSTALL

HOOD PIN

HOOD STATUS: THE HOOD PIN SWITCH (INCLUDED) MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF

A11: OFF/NON

SECURITY STICKER

Notice: the installation of safety elements are mandatory. The hood pin and the sticker are essential security elements and must be installed.

THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

This guide may change without notice. See www.fortin.ca for the latest version.

NOTES

Program bypass option:

UNIT OPTION OPTION UNITE: DESCRIPTION
C1: OEM Remote status (Lock/Unlock) monitoring
IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:
A11: OFF/NON
Hood trigger (Output Status).

C|

Program bypass option

| UNIT OPTION OPTION UNITE| DESCRIPTION
---|---|---|---
D2| Unlock before / Lock after (Disarm OEM alarm)

Program remote
starter option for R.S. OEM REMOTE STAND ALONE:

FUNCTION: 38
MODE: 2

DESCRIPTION

Enable: Press 3x Lock to remote start with the OEM remote.

DESCRIPTION

WIRING CONNECTION

THAR-CHR7

WIRING CONNECTION

THAR-CHR6

WIRING CONNECTION

DECRYPTOR PROGRAMMING PROCEDURE

Parts required (not included)

FLASH LINK UPDATER
FLASH LINK MANAGER
Microsoft Windows Computer with Internet connection Ordinateur Microsoft Windows avec connection Internet
FLASH LINK MOBILE
FLASH LINK MOBILE APP
Smartphone Android or iOS with Internet connection (Internet provider charges may apply)

BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE

Press and hold the programming button: Insert the 6-Pin Mainconnector.
Press and hold the programming button: Connect the 4-PIN Data-link harness (Black connector).
The BLUE, RED, YELLOW and BLUE & RED LEDs will alternatively illuminate.
Release the programming button when the LED is BLUE.
If the BLUE LED is not ON solid disconnect the 6-Pin Main connector and go back to step 1.
Insert the required remaining connectors.
Do not press the brake pedal. Press the START/STOP button twice to turn ON the ignition.
Press and release the programming button once (1x).
The BLUE LED will flash rapidly.
Press the START/STOP button once to turn OFF the ignition.
Disconnect all connectors and after the 6-pin (Main-Harness) or the 4-pin Data-link connector.
Microsoft Windows Computer with Internet connection Ordinateur Microsoft Windows avec connection Internet
Use the tool: FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCryptor menu.
Smartphone (Internet provider charges may apply)
AFTER DCRYPTOR PROGRAMMING COMPLETED Go back to the vehicle and reconnect the 6-pin (Main- Harness) or the 4-pin (Data-Link) connector and after all the remaining connectors.
The module is now programmed.
REMOTE STARTER / ALARM VERIFICATION PROCEDURE

REMOTE STARTER PROGRAMMING PROCEDURE

REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.

REMOTE STARTER FUNCTIONALITY

All doors must be closed.
Remote start the vehicle.
Unlock the doors with either:
- The OEM remote
- The remote-starter remote
Enter the vehicle with the Intelligent SmartKey.
The vehicle can now be put into gear and driven.

Notice: Updated Firmware and Installation Guides Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.

WARNING

The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

TECH SUPPORT