COOPER ASP Aspen Lumark Decorative Aluminum Pole Collection Instruction Manual
- June 13, 2024
- Cooper
Table of Contents
- COOPER ASP Aspen Lumark Decorative Aluminum Pole Collection
- Product Information
- Product Usage Instructions
- DESIGN CONSIDERATIONS
- BASE HEIGHT DIMENSIONS
- ANCHORAGE DATA
- ASP ASPEN ORDERING INFORMATION
- CHI CHARLESTON ORDERING INFORMATION
- STL SEATTLE ORDERING INFORMATION
- VIBRATION
- MAINTENANCE
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
COOPER ASP Aspen Lumark Decorative Aluminum Pole Collection
Product Information
- The Decorative Aluminum Poles are designed for outdoor use and are available in various models including Aspen, Broadway, Charleston, Chesapeake, Seattle, Tampa, Utica, and Washington. The poles are made of aluminum and come in different base heights and dimensions.
- The product is designed to meet Buy American and other domestic preference requirements. It is important to note that the Limited Warranty for this product does not cover fatigue failure or similar damage resulting from vibration, harmonic oscillation, or resonance.
- Specifications and dimensions of the poles are subject to change without notice. For more information about available options, accessories, and ordering information, consult your lighting representative at Cooper Lighting Solutions or visit www.cooperlighting.com.
Product Usage Instructions
Aspen (ASP) Pole
To order an Aspen pole, use the following ordering information:
- Base Type: ASP=Aspen
- Mounting Height (Feet): Choose from 8′, 10′, 12′, 14′, 16′, 18′, or 20′
- Shaft Size at Base (Inches): 10
- Wall Thickness (Inches): 2=0.188
- Shaft Type: RT=Round Tapered
- Mounting Type: Choose from 2-3/8” O.D. Tenon (2), 4” O.D. Tenon (4), or 3” O.D. Tenon (5)
- Color Options: Choose from AP=Grey, BK=Black, BZ=Bronze,DP=Dark Platinum, GM=Graphite Metallic, GN=Hartford Green, or WH=White
- Additional Options: C=Provision for Convenience Outlet, E=GFCI
- Convenience Outlet, G=Ground Lug
Broadway (BWR) Pole
To order a Broadway pole, use the following ordering information:
- Base Type: BWR=Broadway
- Mounting Height (Feet): Choose from 12′, 14′, 16′, 18′, 20′, 22′, 24′, 26′, or 28′
- Shaft Size at Base (Inches): 12
- Wall Thickness (Inches): 2=0.188
- Shaft Type: RT=Round Tapered
- Mounting Type: Choose from 2-3/8” O.D. Tenon (4) or 4” O.D. Tenon (1)
- Color Options: Choose from AP=Grey, BK=Black, BZ=Bronze, DP=Dark Platinum, GM=Graphite Metallic, GN=Hartford Green, or WH=White
- Additional Options: C=Provision for Convenience Outlet, E=GFCI Convenience Outlet, G=Ground Lug
For more information on specific models and their ordering information, please refer to the user manual or visit the manufacturer’s website.
DESIGN CONSIDERATIONS
VIBRATIONS AND NON-GROUND MOUNTED INSTALLATIONS
The information contained herein is for general guidance only and is not a
replacement for professional judgment. Design considerations for wind-induced
vibrations and non-ground mounted instal-lations (e.g., installations on
bridges or buildings) are not included in this document. Consult with a
professional, and local and federal standards, before ordering to ensure
product is appropriate for the intended purpose and installation location.
Refer to the Cooper Lighting Solutions Light Pole White Paper for risk factors
and design considerations. Learn more.
NOTE: The Limited Warranty for this product specifically excludes fatigue
failure or similar damage resulting from vibration, harmonic oscillation or
resonance.
Specifications and dimensions subject to change without notice. Consult your
lighting representative at Cooper Lighting Solutinos or visit
www.cooperlighting.com for available options, accessories and ordering
information.
Options to meet Buy American and other domestic preference requirements
BASE HEIGHT DIMENSIONS
ANCHORAGE DATA
Pole| Anchor Bolt and Template Package| Shaft Diameter
(inches)| Bolt Circle (inches)| Number of Bolts| Bolt
Size (inches)| Template Only
---|---|---|---|---|---|---
Aspen (ASP)| 317AVE40S| 10 x 4| 14.19 + – 0.81| 4| 3/4 x 17| 406541D
Broadway (BWR) 1| 317RB408| 8 x 4| 12| 4| 3/4 x 17| 405592D
Broadway (BWR) 2| 436RB408| 8 x 4| 12| 4| 1 x 36| 227878D
Charleston (CHI)| 317RB4HN| 4, 5, 6| 11.5 + – 1.50| 4| 3/4 x 17| 227095D
Cheasapeake (CPR)| 317RB4WI| 4, 5| 13.25| 4| 3/4 x 17| 227116D
Seattle (STL)| 317AVE10| 4| 9| 4| 3/4 x 17| 407040D
Tampa (TAM)| 317AVE30| 5 x 4| 16| 4| 3/4 x 17| 407040D
Utica (UBN)| 317RB4SC| 4, 5| 12.5| 4| 3/4 x 17| 227314D
Washington (WA3)| 317RB4WA| 4, 5, 6| 11.5 + – 1.50| 4| 3/4 x 17| 227077D
NOTES: 1. Anchor bolt set should be for up to 16’ mounting height. 2.
Anchor bolt set should be for up to 17′ and over mounting height.
ASP ASPEN ORDERING INFORMATION
SAMPLE NUMBER: ASP08102RT4BK
Base Type| Mounting Height (Feet)| Shaft Size at Base (Inches)| Wall Thickness (Inches)| Shaft Type| Mounting Type| Color| Options
(Add as Suffix)
---|---|---|---|---|---|---|---
ASP =Aspen| 08 =8′
10 =10′
12 =12′
14 =14′
16 =16′
18 =18′
20 =20′
| 10 =10″| 2 =0.188″| RT =Round Tapered 2| 2 =2-3/8” O.D. Tenon| AP =Grey BK =Black BZ =Bronze DP =Dark Platinum
GM =Graphite Metallic GN =Hartford Green WH =White
| C =Provision for Convenience Outlet
E =GFCI Convenience Outlet
G =Ground Lug
BAA-ASP =Aspen| | | | 4 = 4″ O.D. Tenon 1
Buy American Act Compliant 3| | | | 5 = 3″ O.D. Tenon
TAA-ASP =Aspen| | | |
Trade| | | |
Agreements Act| | | |
Compliant 3| | | |
NOTES: 1. Provides no tenon as shaft tapers to 4”. 2. Shaft Taper is from 10” to 4”. 3. Only product configurations with these designated prefixes are built to be compliant with the Buy American Act of 1933 (BAA) or Trade Agreements Act of 1979 (TAA), respectively. Please refer to DOMESTIC PREFERENCES website for more information. Components shipped separately may be separately analyzed under domestic preference requirements.
BWR BROADWAY ORDERING INFORMATION
SAMPLE NUMBER: BWR1281RT5BK
Base Type| Mounting Height (Feet)| Shaft Size at Base (Inches)| Wall Thickness (Inches)| Shaft Type| Mounting Type| Color| Options
(Add as Suffix)
---|---|---|---|---|---|---|---
BWR =Broadway
BAA-BWR =Broadway Buy American Act Compliant 4
TAA-BWR =Broadway Trade Agreements Act Compliant 4
| 12 =12′
14 =14′
16 =16′
18 =18′
20 =20′ 2
22 =22′ 2
24 =24′ 2
2 6=26′ 2
28 =28′ 2
| 8 =8″ 1| 1 =0.156″
2 =0.188″
3 =0.250″ 2
| RT =Round Tapered 3| 5 =3″ O.D. Tenon| AP =Grey BK =Black BZ =Bronze DP =Dark Platinum
GM =Graphite Metallic GN =Hartford Green WH =White
| C =Provision for Convenience Outlet 5
E =GFCI Convenience Outlet 5
G =Ground Lug
NOTES: 1. Pole tapers to 4″ at pole top. 2. Consult factory for
availability. 3. Shaft Taper is from 8” to 4”. 4. Only product configurations
with these designated prefixes are built to be compliant with the Buy American
Act of 1933 (BAA) or Trade Agreements
Act of 1979 (TAA), respectively. Please refer to DOMESTIC PREFERENCES website
for more information. Components shipped separately may be separately analyzed
under domestic preference requirements. 5. Outlet is located 4′ above base and
on same side of pole as hand hole, unless specified otherwise. Receptacle not
included, provision only.
CHI CHARLESTON ORDERING INFORMATION
SAMPLE NUMBER: CHI0840RS5BK
Base Type| Mounting Height (Feet)| Shaft Size at Base (Inches) 1| Wall Thickness (Inches)| Shaft Type| Luminaire| Color| Options
(Add as Suffix)
---|---|---|---|---|---|---|---
CHI =Charleston| 08 =8′
10 =10′
12 =12′
14 =14′
16 =16′
18 =18′
| 4 =4″| 0 =0.125″| RS =Round Straight| 4 =4″ O.D. Tenon 2| AP =Grey BK =Black BZ =Bronze DP =Dark Platinum
GM =Graphite Metallic GN =Hartford Green WH =White
| C =Provision for Convenience Outlet
E =GFCI Convenience Outlet
G =Ground Lug
BAA-CHI =Charleston Buy American Act Compliant 4| 5 =5″
6 =6″
| 2 =0.188″| SF =Straight Fluted 3| 5 =3″ O.D. Tenon
TAA-CHI =Charleston| | | |
Trade| | | |
Agreements Act| | | |
Compliant 4| | | |
NOTES: 1. 4″ shaft size available in 8′, 10′ and 12′ mounting heights. 5″ shaft size available in 8′, 10′, 12′, 14′ ,16′ and 18′ mounting heights. 6″ shaft size available in 18′ for SF and 12′, 14′, 16′ and 18′ mounting heights for RS. 2. Provides 4″ tenon on 5″ shafts or no tenon on 4″ shafts allowing slip over of Epic Collection, Slide and Flite arm accessories. See individual product specifications for additional informaiton. 3. Only available with 0.188” wall thickness. 4. Only product configurations with these designated prefixes are built to be compliant with the Buy American Act of 1933 (BAA) or Trade Agreements Act of 1979 (TAA), respectively. Please refer to DOMESTIC PREFERENCES website for more information. Components shipped separately may be separately analyzed under domestic preference requirements.
CPR CHESAPEAKE ORDERING INFORMATION SAMPLE NUMBER: CPR0840RS5BK
Base Type| Mounting Height (Feet)| Shaft Size at Base (Inches)| Wall Thickness (Inches)| Shaft Type| Luminaire| Color| Options
(Add as Suffix)
|
---|---|---|---|---|---|---|---|---
CPR =Chesapeake| 08 =8′| 4 =4″| 0 =0.125″| RS =Round
Straight| 4 =4″ O.D. Tenon 1| AP =Grey BK =Black BZ
=Bronze DP =Dark Platinum
GM =Graphite Metallic GN =Hartford Green WH =White
| C =Provision for Convenience Outlet|
BAA CPR =Chesapeake| 10 =10′| 5 =5″| | SF =Straight
Fluted| 5 =3″ O.D. Tenon| E =GFCI Convenience Outlet|
Buy American Act Compliant 2
TAA-CPR =Chesapeake
| 12 =12′
14 =14′
|
| | | | G =Ground Lug|
Trade| | | | | | |
Agreements Act| | | | | | |
Compliant 2| | | | | | |
NOTES: 1. Provides 4″ tenon on 5″ shafts or no tenon on 4″ shafts allowing slip over of Epic Collection, Slide and Flite arm accessories. See individual product specifications for additional information. 2. Only product configurations with these designated prefixes are built to be compliant with the Buy American Act of 1933 (BAA) or Trade Agreements Act of 1979 (TAA), respectively. Please refer to DOMESTIC PREFERENCES website for more information. Components shipped separately may be separately analyzed under domestic preference requirements.
STL SEATTLE ORDERING INFORMATION
SAMPLE NUMBER: STL0842RS5BK
Base Type| Mounting Height (Feet)| Shaft Size at Base (Inches)| Wall Thickness (Inches)| Shaft Type| Luminaire| Color| Options
(Add as Suffix)
---|---|---|---|---|---|---|---
STL =Seattle| 08 =8′
10 =10′
12 =12′
14 =14′
16 =16′
| 4 =4″| 2 =0.188″| RS =Round Straight| 4 =4″ O.D. Tenon 1| AP =Grey BK =Black BZ =Bronze DP =Dark Platinum
GM =Graphite Metallic GN =Hartford Green WH =White
| C =Provision for Convenience Outlet
BAA-STL =Seattle
Buy American Act Compliant 2
| | | | 5 =3″ O.D. Tenon| E =GFCI Convenience Outlet
G =Ground Lug
TAA-STL =Seattle Trade| | | | |
Agreements Act| | | | |
Compliant 2| | | | |
TAM TAMPA ORDERING INFORMATION
SAMPLE NUMBER: TAM1041RS5BK
Base Type| Mounting Height (Feet)| Shaft Size at Base (Inches)| Wall Thickness (Inches)| Shaft Type| Luminaire| Color| Options
(Add as Suffix)
---|---|---|---|---|---|---|---
TAM =Tampa| 10 =10′
12 =12′
14 =14′
16 =16′
18 =18′
| 5 =5″| 1 =0.156″| RT =Round Tapered 2| 4 =4″ O.D. Tenon 1| AP =Grey BK =Black BZ =Bronze DP =Dark Platinum
GM =Graphite Metallic GN =Hartford Green WH =White
| C =Provision for Convenience Outlet
BAA-TAM =Tampa Buy American Act Compliant 3| | 2 =0.188″| | 5
=3″ O.D. Tenon| E =GFCI Convenience Outlet
G =Ground Lug
TAA-TAM =Tampa Trade| | | | |
Agreements Act| | | | |
Compliant 3| | | | |
- NOTES: 1. Provides 4″ tenon on 5″ shafts or no tenon on 4″ shafts allowing slip over of Epic Collection, Slide and Flite arm accessories. See individual product specifications for additional information. 2. Shaft Taper is from 5” to 4”. 3. Only product configurations with these designated prefixes are built to be compliant with the Buy American Act of 1933 (BAA) or Trade Agreements Act of 1979 (TAA), respectively. Please refer to DOMESTIC PREFERENCES website for more information. Components shipped separately may be separately analyzed under domestic preference requirements.
UBN UTICA ORDERING INFORMATION SAMPLE NUMBER: UBN0840RS5BK
Base Type| Mounting Height (Feet)| Shaft Size at Base (Inches)| Wall Thickness (Inches)| Shaft Type| Luminaire| Color| Options
(Add as Suffix)
|
---|---|---|---|---|---|---|---|---
UBN =Utica| 08 =8′| 4 =4″| 0 =0.125″| RS =Round
Straight| 4 =4″ O.D. Tenon 1| AP =Grey| C =Provision for
Convenience Outlet|
BAA-UBN =Utica Buy| 10 =10′| 5 =5″| | SF =Straight
Fluted| 5 =3″ O.D. Tenon| BK =Black| E =GFCI Convenience
Outlet|
American Act Compliant 2
TAA-UBN =Utica Trade Agreements Act Compliant 2
| 12 =12′
14 =14′
|
| | | | BZ =Bronze DP =Dark Platinum
GM =Graphite Metallic GN =Hartford Green WH =White
| G =Ground Lug|
NOTES: 1. Provides 4″ tenon on 5″ shafts or no tenon on 4″ shafts allowing slip over of Epic Collection, Slide and Flite arm accessories. See individual product specifications for additional information. 2. Only product configurations with these designated prefixes are built to be compliant with the Buy American Act of 1933 (BAA) or Trade Agreements Act of 1979 (TAA), respectively. Please refer to DOMESTIC PREFERENCES website for more information. Components shipped separately may be separately analyzed under domestic preference requirements.
WA3 WASHINGTON ORDERING INFORMATION SAMPLE NUMBER: WA30840RS5BK
Base Type| Mounting Height (Feet)| Shaft Size at Base (Inches) 1| Wall Thickness (Inches)| Shaft Type| Luminaire| Color| Options
(Add as Suffix)
---|---|---|---|---|---|---|---
WA3 =Washington 3| 08 =8′
10 =10′
12 =12′
14 =14′
16 =16′
18 =18′
| 4 =4″| 0 =0.125″| RS =Round Straight| 4 =4″ O.D. Tenon 2| AP =Grey BK =Black BZ =Bronze DP =Dark Platinum
GM =Graphite Metallic GN =Hartford Green WH =White
| C =Provision for Convenience Outlet
E =GFCI Convenience Outlet
G =Ground Lug
BAA-WA3 =Washington 3 Buy American Act Compliant 3| 5 =5″
6 =6″
| 2 =0.188″| SF =Straight Fluted| 5 =3″ O.D. Tenon
TAA-ASP =Washington 3| | | |
Trade Agreements| | | |
Act Compliant 3| | | |
NOTES: 1. 4″ shaft size available in 8′, 10′ and 12′ mounting heights. 5″ shaft size available in 8′, 10′, 12′, 14′, 16′ and 18′ mounting heights. 6″ shaft size available in 16′ and 18′ mounting heights. 2. Provides 4″ tenon on 5″ shafts or no tenon on 4″ shafts allowing slip over of Epic Collection, Slide and Flite arm accessories. See individual product specifications for additional informaiton. 3. Only product configurations with these designated prefixes are built to be compliant with the Buy American Act of 1933 (BAA) or Trade Agreements Act of 1979 (TAA), respectively. Please refer to DOMESTIC PREFERENCES website for more information. Components shipped separately may be separately analyzed under domestic preference requirements.
VIBRATION
Vibrations may cause damage to structures, including poles. Vibrations are unpredictable, and there are many factors and variables that can cause damaging vibrations. Many wind conditions exist that can create damaging vibrations to poles and luminaires, such as constant winds between 10-30 mph. Although all pole types can experience vibration, straight square poles seem to be most prone. Vibration dampers and/or a round tapered design may be used to mitigate damage from vibrations, but there is no guarantee damaging vibrations will be prevented. Vibration dampers are not included with this pole but can be ordered separately. Consult with a professional, and local and federal standards, to ensure this pole is appropriate for the intended purpose and installation location. Refer to Cooper Lighting Solutions’ Light Pole White Paper for risk factors and design considerations.
MAINTENANCE
-
Perform inspections periodically. A prudent inspection schedule would be: one week after installation, one month after installation, yearly after installation, and following any major wind event. Dur-ing the inspection, check the poles for cracks. If cracks are detected, remedial action is required. Recheck anchor bolt torques and re-tighten according to the recommended torque values. Check for missing covers and pole caps and replace as necessary. Check the pole for corrosion and deterioration of the finish. Should there be corrosion or deterioration, take remedial action to correct.
-
WARNING: Customer is responsible for engineering analysis to confirm pole and fixture compatibility for all applications. Refer to pole white paper WP513001EN for additional support information. Before installing, make sure proper anchor bolts and templates are obtained. The use of unauthorized accessories such as banners, signs, cameras or pennants for which the pole was not designed voids the pole warranty and may result in pole failure causing serious injury or property damage. Information regarding total loading capacity can be supplied upon request. The pole warranty is void unless poles are used and installed as a complete pole and luminaire combination. This warranty specifically excludes failure as the result of a third party act or omission, misuse, unanticipated uses, fatigue failure or similar phenomena resulting from induced vibration, harmonic oscillation or resonance associated with movement of air currents around the product.
Specifications and dimensions subject to change without notice. Consult your lighting representative at Cooper Lighting Solutions or visit www.cooperlighting.com for available options, accessories and ordering information. -
Cooper Lighting Solutions 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800
-
Specifications and dimensions subject to change without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>