FORTIN 2020 Honda Pilot Push Button Remote Starters and Alarm Systems Installation Guide

FORTIN 2020 Honda Pilot Push Button Remote Starters and Alarm Systems

Product Information

• Product Name: Immobilizer Bypass
• Compatible Vehicles: Honda Pilot (2016-2022), Honda Ridgeline (2017-2023)
• Firmware Version: 73.[38]
• Minimum Requirement: Honda/Acura vehicles
• Functionality: Immobilizer Bypass, Lock, Unlock, Arm, Disarm, Trunk (open), Parking Lights, AutoLights OFF, Tachometer, Door Status,
• Trunk Status, Hood Status*, Hand-Brake Status, Foot-Brake Status, OEM Remote Monitoring
• Installation: Must be installed by a highly qualified technician to avoid permanent damage to the vehicle
• Parts Required (Not Included): 1X Fuse, 2X Relays, 2X Diodes
• Mandatory Installation: The hood pin switch must be installed for proper functionality

  ---

Product Usage Instructions

1. Ensure that the vehicle is compatible with the Immobilizer Bypass module. It is compatible with Honda Pilot (2016-2022) and Honda Ridgeline (2017-2023).
2. Prior to installation, check the firmware version of the module. The current firmware version is 73.[38].
3. If you need to update the firmware or add options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool (sold separately).
4. If your vehicle is not equipped with a functional hood pin, you need to program the bypass option. Set the function A11 to OFF if the vehicle can be remote started with the hood open.
5. This programming is necessary for proper operation.
6. The installation of safety elements, such as the hood pin, is mandatory. It is an essential security element and must be installed.
7. The Immobilizer Bypass module must be installed by a highly qualified technician to avoid permanent damage to the vehicle.
8. Incorrect connections during installation can cause permanent damage to the vehicle. Ensure that the installation is done correctly.
9. The module requires additional parts for installation, including 1X Fuse, 2X Relays, and 2X Diodes. These parts are not included in the module.
10. Follow the specified wiring connections for proper installation.
11. The connections involve various components such as parking lights, steering lock module, hood, hand brake, trunk release, tachometer, foot brake, and ground.
12. For vehicles with data-link, a direct connection is required. Follow the specified wiring connections for the data-link connection.
13. For vehicles without data links, certain connections are not required.
14. Ensure that the Ignition, Lock, Unlock, Door Status, Trunk Status, Ground While Running, Foot Brake, Tachometer, Trunk Release, Hand Brake, Hood Status, and PTS (Push-to-Start) connections are made correctly according to the specified wire colors.
15. Use the provided diagram (page 3/7) to make the necessary connections.
16. After installation, test the functionality of the Immobilizer Bypass module to ensure proper operation.
17. Please note that these instructions provide a general overview of the product usage. For detailed installation and programming instructions, refer to the official user manual or consult a qualified technician.

REGULAR INSTALLATION WITH TAKE OVER

THIS MODULE MUST BE INSTALLED BY A HIGHLY QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

Parts required (Not included)

• 1X Fuse
• 2X Relays
• 2X Diodes

MANDATORY INSTALL

Notice: The installation of safety elements is mandatory. The hood pin is an essential security element and must be installed.

DESCRIPTION

AUTOMATIC TRANSMISSION WIRING CONNECTION

DECRYPTOR PROGRAMMING PROCEDURE

BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE.

1. Press and hold the programming button: Connect the 4-PIN Data-link harness (Black connector). The Blue, Red, Yellow, and Blue & Red LEDs will alternatively illuminate.

2. Release the programming button when the Blue and red LEDs are ON. If the Blue & Red LEDs are not ON solid disconnect the 4-PIN Data Link and go back to step 1.

3. If the Blue & Red LEDs are not ON solid disconnect the 4-PIN Data Link and go back to step 1.

4. Press and release the programming button three times (3x). The Red and Blue LEDs will alternate between 2 flashes and a pause.

5. Do not press the brake pedal. Press the START/STOP button twice to turn ON the ignition Do not press the brake pedal. Press the START/STOP button twice to turn ON the ignition Do not press the brake pedal.
   Press the START/STOP button twice to turn ON the ignition

6. Do not press the brake pedal. Press the START/STOP button twice to turn ON the ignition Do not press the brake pedal. Press the START/STOP button twice to turn ON the ignition

7. Disconnect all the connectors and after The data-link (4-pin) connector

8. Use the tool: FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCryptor menu.

9. AFTER DECRYPTOR PROGRAMMING COMPLETED Go back to the vehicle and reconnect the 4-Pin (Data-Link) connector and after, all the remaining connector

REMOTE STARTER

• Test the remote starter. Remote start the vehicle.

REMOTE STARTER FUNCTIONALITY

Notice: Updated Firmware and Installation Guides Updated firmware and installation guides are posted on our website on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.

WARNING

The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer-safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly, or in any other way. Neither the manufacturer nor distributor of this module is responsible for damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by a qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version. Copyright © 2006-2018, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>