FORTIN 82871 Nissan NV 200 2014 Regular Key Remote Starters Instruction Manual

FORTIN 82871 Nissan NV 200 2014 Regular Key Remote Starters Instruction Manual

Vehicle functions supported in this diagram (functional if equipped)

VEHICLE
| YEARS| Immobilizer bypass| Lock| Arm| Unlock| Disarm| Parking Lights| Autolight| Tachometer| Door Status| Trunk Status|

Hood Status*

|

Hand-Brake Status

|

Foot-Brake Status

|

OEM Remote monitoring

CHEVROLET| | | | | | | | | | | | | | |
City Express| 2014-2017| •| •| •| •| •| •| •| •| •| •| •| •| •| •
NISSAN| | | | | | | | | | | | | | |
NV200| 2012-2020| •| •| •| •| •| •| •| •| •| •| •| •| •| •

FIRMWARE VERSION

To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.

| Program bypass option:| UNIT OPTION| DESCRIPTION
---|---|---|---
C1| OEM Remote status (Lock/Unlock) monitoring

MANDATORY INSTALL

HOOD PIN HOOD STATUS :
THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF

Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed

THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE

DESCRIPTION

WIRING CONNECTION

KEY BYPASS PROGRAMMING PROCEDURE

1. Press hold Connect and the programming button: the 4-PIN Data-lin k harness (Black connector).
   The Blue, Red, Yellow and Blue & Red LEDs will  alternatively illuminate
   

2. Release the programming button when the LED is YELLOW.
   If the LED is not solid YELLO W the 4-Pin connector (Main-Harness) and go back to step 1
   

3. Insert the required remaining connectors
   

4. Press and release the programming button two times (2x).
   The YELLOW LED will alternate between 2x flashes and a pause.
   Wait until the YELLOW LED turns ON.
   

5. Turn the key to the Ignition ON/RUN position
   The RED LED will turns ON.
   
   If the YELLOW and RED LED’s are not solid, the key and to step 5. this step until the RED and YELLOW LED’s are solid .
   
   Wait for the BLUE LED to flash rapidly.
   

6. Turn the key to the OFF position.

7. Remove the key from the Ignition barrel.

8. Turn the key to the Ignition ON/RUN position.
   The BLUE, YELLOW and RED LED’s will rapidly alternate.
   When the YELLOW LED begins to flash rapidly: Key bypass programmed.
   

9. Turn the key to the OFF position.

The module is now programmed
Use the remote of the remote starter or security system to test all of the supported features to ensure proper programming.

REMOTE STARTER FUNCTIONALITY

All doors must be closed.

Remote start the vehicle

Unlock the doors with the remote-starter remote or the OEM remote

Insert and Turn the key to the Ignition ON/RUN position.

Press the brake pedal.

The vehicle can now be put in to gear and driven.

Notice: Updated Firmware and Installation Guides Updated fi rmware and installation guides are posted on our web site on a regular  basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no  liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest versio

This guide may change without notice. See www.fortin.ca for latest version

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>