FORTIN EVO-ALL Push to Start Remote Starters and Alarm Systems Installation Guide

THAR-AUD2
ADDENDUM – SUGGESTED WIRING CONFIGURATION
THARNESS STAND ALONE INSTALLATION

V EHICLE
YEARS

EVO-ALL Push to Start Remote Starters and Alarm Systems

ONLY COMPATIBLE WITH AUTOMATIC TRANSMISSION VEHICLES.
Vehicle functions supported in this diagram (functional if equipped)

OEM Remote monitoring **

AUDI

•
| COMPATIBLEMODULEREQUIRED:| QR CODE ON THE LABEL
MANUFACTUREDAFTER: 2019
---|---|---

FIRMWARE VERSION VERSION LOGICIELLE

To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.
NOTES

| 1 KEY REQUIRED FOR THE INSTALLATION
---|---
| Parts required (Not included)
1x Vehicle Key

Program bypass option
IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:

MANDATORY INSTALL

• HOOD PIN CONTACT DE CAPOT| | HOOD STATUS : THE HOOD PIN SWITCH MUST BE INSTALLED
  IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.
  ---|---|---
  | Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.| THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE  ERMANENT
  DAMAGE TO THE VEHICLE.
  ---|---|---

PARTS REQUIRED (NOT INCLUDED)

MANDATORY

Part #: RSPB available, Sold separately.
Notice: the installation of safety elements are mandatory.
The hood pin and the valet switch are essential security elements and must be installed.

STAND ALONE CONFIGURATION

| Program bypass option
OEM Remote Stand Alone Remote Starter:
---|---
| Program bypass option with omen remote:
| Program bypass option with RF KIT antenna:
UNIT OPTION| DESCRIPTION
---|---
| By default, LOCK, LOCK, LOCK
Par default, VERROUILLE,VERROUILLE,VERROUILLE
UNIT OPTION OPTION UNITE| DESCRIPTION
C1| OEM Remote Monitoring
UNIT OPTION OPTION UNITE| DESCRIPTION
H1 to H6
H1 à H6| Supported RF Kits and select RF Kit

REMOTE STARTER FUNCTIONALITY

REMOTE STARTER DIAGNOSTICS

MODULE RED LED

x2 flash :| Brake ON
x3 flash :| No tach
x4 flash :| Ignition before start
x5 flash :| Hood Open

REMOTE STARTER WARNING CARD

CUT THIS WARNING CARD AND STICK IT ON A VISIBLE PLACE: or use the package RSPB, Sold separately.
WARNING
REMOTE STARTER
THE VEHICLE CAN BE STARTED BY EITHER: PRESSING THE LOCK BUTTON ON THE OEM REMOTE 3 TIMES CONSECUTIVELY OR BY A SMARTPHONE. TURN ON THE SAFETY SWITCH LOCATED UNDER THE DASHBOARD BEFORE WORKING ON THE VEHICLE.

DESCRIPTION

C1
D6| OEM Remote status (Lock/Unlock) monitoring
Push-to-Start
Program bypass option OPTION COMFORT GROUP:| A5| AUTOMATIC TURN ON : option confortgroup
---|---|---
E8| By default : Feature 5 : Trunk button on OEM Remote need to be hold 2 second to open trunk
Trunk button on OEM Remote need to be pressed twice.

AUTOMATIC TRANSMISSION WIRING CONNECTION

PROGRAMMING PROCEDURE

1| | Press and hold the Connect
programming button:
the 4-PIN Data-link harness (Black connector).
 The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate.
---|---|---
2| | Release the programming button when the LED is BLUE.
If the LED is not solid BLUE disconnect the 4-Pin connector (Data-Link) and go back to step 1.

3| | Insert the required remaining connectors.
4| | Do not press the brake pedal.
the Push-to-Start button once to turn on the ignition. Press
→ The BLUE LED will flash rapidly.
5| | Press the Push-to-Start button once to turn off the ignition.
→ The BLUE LED will turn off.

The module is now programmed.

REMOTE STARTER FUNCTIONALITY

Module label

Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.
WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

TECH SUPPORT
Tel: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>