SATCO S8020 24 Foot LED String Light Set Instruction Manual
- June 4, 2024
- SATCO
Table of Contents
24′ LED STRING LIGHT SET
Model: S8020
INSTALLATION AND SAFETY INSTRUCTIONS
IMPORTANT: Read before installing the fixture. Retain for future
reference.
19-1/8”
PACKAGE CONTENTS:
- 24 ft. heavy-duty string light with 12 sockets.
- 12 LED Bulbs (1-Watt LED S14 E26 included)
(S8021 – Replacement bulbs sold separately).
WARNING – SAFETY INFORMATION:
- NEVER use an extension cord unless the plug can be fully inserted. DO NOT alter the plug.
- To reduce the risk of electric shock, DO NOT use the product if the power cord is frayed or broken.
- Always unplug this product before replacing bulbs.
- This string light is rated 12W; do not overload. Connect end-to-end a total of 360 Watts (30 24’ strings) maximum of light strings or decorative lighting of the same type.
- Risk of Fire: DO NOT use bulbs having a wattage greater than the maximum value stated on the product.
- If replacing bulbs, please contact Satco customer service at Satco.com/support.
- For indoor and outdoor use.
- To reduce the likelihood of excessive heat and possible damage, use only decorative LED lamps packaged with this product.
- Always unplug this product before installing or replacing fused and/or lamps.
- This is an electric product – not a toy! To avoid the risk of fire, burns, personal injury, and electric shock, it should not be played with or placed where small children can reach it.
INSTALLATION:
NOTE: DO NOT DRAPE CORD. KEEP AWAY FROM CHILDREN.
Before beginning the installation of the product, make sure all parts are
present. If any part is missing or damaged, do not attempt to install the
product. No tools are required for installation.
- Carefully unpack string lights from the box.
- Straighten string lights, eliminating any kinks before using.
- Each string light is designed with a universal keyhole for mounting with lights hanging downward. Hardware options (not included) screws, nails, zip ties, hooks, and more.
- Before plugging the power cord of lights into a wall outlet, make sure each light bulb is securely fastened. To ensure the lamp, socket, and rubber gasket make a water-tight seal, screw the lamp in secure enough for all components to make contact. If a bulb does not light when energized, apply another ½ turn until it does.
DANGER: If using this light in a WET or DAMP location, connect this product to a Ground Fault Circuit interrupting (GFCI) outlet to reduce the risk of personal injury, electrical shock or death. If one is not provided, contact a qualified electrician for proper installation.
INSTALLING MULTIPLE STRING LIGHT SETS:
NOTE: Always unplug string light from outlet before connecting additional
string lights.
Extend the length of your lights by connecting more than one strand together
to form one continuous string up to 720 feet (30 sets)!
Simply follow the above installation steps making sure each connection between
strands is secured and the end female receptacle is securely covered using the
receptacle cover when done.
CARE AND MAINTENANCE: Clean only with a dry, soft cloth. Do NOT use
abrasive cleaners
Problem: Light does not come on initially or no longer comes on.
Possible Causes: The bulb is burned out. The power is OFF. The lamp is
not plugged in.
Corrective Actions: Replace bulb. Make sure the power supply is ON. Plug
the lamp into the outlet.
Satco Products, Inc.
Brentwood, NY 11717
Documents / Resources
|
SATCO S8020 24 Foot LED String Light
Set
[pdf] Instruction Manual
S8020, 24 Foot LED String Light Set, S8020 24 Foot LED String Light Set, LED
String Light Set, String Light Set, Light Set
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>