SATCO LIGHTING S11571 Square Smart Recessed Trim and Housing User Guide

June 2, 2024
SATCO LIGHTING

SATCO LIGHTING S11571 Square Smart Recessed Trim and Housing

SATCO LIGHTING S11571 Square Smart Recessed Trim and
Housing

USER GUIDE

SYSTEM REQUIREMENTS

  • Minimum iOS 9.3 or Wi-Fi 4.4
  • Dedicated 2.4GHz Wi-Fi Network

TECHINCAL SUPPORT

support@satcostarfish.com

1. DOWNLOAD THE STARFISH APP

(App design is subject to change without notice.)

REGISTER YOUR ACCOUNT

Verify you’re connected to a 2.4GHz Wi-Fi Network.

2. Launch the STARFISH app and tap “Sign-up” to create a new account or “Login” to your existing account.

3. Enter email address, then select “Get verification code”.

4. Enter verification code that was sent to your email.

CREATE A HOME

5. Tap the “Me” button at the bottom of the screen, and then “Home Management”.
Select the “Create a home” button to set up your home.

6. Tap the (+) button on the top right corner to access the action menu, then select “ Add Device “.

7. Select device type from the listed categories.

categories

It is recommended to pair 8 or fewer devices at 1 time. If you are pairing multiple devices at one time, and some of the devices do not pair the 1st time; repeat the pairing process.

PAIR A DEVICE WITH WI-FI

8A. Turn your device On and Off 5 times to enter pairing mode. Confirm that the device is blinking quickly and click “ next ”.

This device has advanced pairing retention technology. The device(s) that already paired will remain paired to the network, the device(s) that did not pair will return to pairing mode.
To reset to factory settings, turn the switch off/on 8x.

PAIR A DEVICE WITH WI-FI/BLUETOOTH

Note: Verify your mobile device is connected to a 2.4GHz Wi-Fi Network and that you have Bluetooth turned ON for connection.

8B. For Wi-Fi/Bluetooth enabled devices, you will see a pop-up indicating that there are unpaired devices in the area.
The device does not need to be in pairing mode.
Tap “ Add ” and select the devices you would like to connect.

Add

9A. Select your 2.4GHz Wi-Fi Network name and enter password then click “ Next.”

The pairing status screen will appear.

appear

9B. Once all the devices have 10 connected, tap “Next”.

Next

Once device is successfully paired, continue to step 10.

10. When successfully connected, you may rename the device. Tap the “ Pen ” icon, enter the new name and select “Done”. The device is now ready to be controlled with the STARFISH app.

Note: If pairing is unsuccessful, please refer to the FAQs on Satco.com/Starfish

Bluetooth is strictly used to pair and connect the device. A 2.4GHz Wi-Fi Network is required to operate all STARFISH products.

SHARE A HOME

11. From the Home Management screen, select the Home that you would like to share.

Tap “ Add Member ” and select the way that you would like to send the invitation

Add Member

12. Enter the user information and select if the new member will be an “ Administrator ” or a “Common Member” in the Home.

Tap “ Save ” to send the invitation.

Specifications:

  • Wi-Fi Network Compatibility: 2.4GHz
  • Bluetooth Connectivity: Required for some devices
  • Pairing Retention Technology: Yes
  • Maximum Devices to Pair at Once: 8

FAQ

Q: What should I do if pairing is unsuccessful?

A: If pairing is unsuccessful, please refer to the FAQs on Satco.com/Starfish for troubleshooting steps and assistance.

TECHINCAL SUPPORT

support@satcostarfish.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals