BORMANN BLF3550 Solar Led Street Light Instruction Manual

: June 12, 2024
: BORMANN

Table of Contents

BORMANN BLF3550 Solar Led Street Light
Product Information
Product Usage Instructions
Installation Points
Usage Method
Remote Control Key Instructions
Important hints
TECHNICAL DATA
WARRANTY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BORMANN BLF3550 Solar Led Street Light

BORMANN-BLF3550-Solar-Led-Street-Light-PRODUCT

Product Information

Product Model: BLF3550, BLF3600

Product Specifications:

Model| Rated Power| Color Temperature| Color Rendering Index| Battery Capacity| Charging Time| Running Time| Dimensions| Beam Angle| Material| IP Grade| Average Life (Hrs)| Luminous Flux
---|---|---|---|---|---|---|---|---|---|---|---|---
BLF3550| 150 W| 6500 K| > 70| 32650 – 10000 mAh| 6 hours| 12 hours| 50023580 mm| 120 deg.| ABS| IP65| 25000| 750 Lumen
BLF3600| 300 W| 6500 K| > 70| 32650 – 20000 mAh| 6 hours| 12 hours| 82024575 mm| 120 deg.| ABS| IP65| 25000| 1000 Lumen

Other Product Features:

Solar street light with embedded solar panel
Waterproof design (IP65)
Supports external power supply and solar panel expansion charging
Remote control with various lighting modes
365 days light
Dustproof

Product Usage Instructions

Installation Points:

Require the direction to the southwest and the best installation angle with the horizontal plane. Refer to Table 1 for the local best installation angle.
Ensure solar panels are exposed to direct sunlight throughout the day without obstructions from buildings or trees. Install solarpanels correctly and scientifically for the best charging effect.

Usage Method:

Step 1: Check lights

The solar lamp has been charged before the factory. Before installation, check whether the light can be turned on or off by covering the solar panel with a Book (or keeping it in the dark). If the lights show that the lamps are in good condition, proceed with installation and use.

Installation Instructions – Method 1:

Note: The installation and inspection methods of all the above lamps are roughly the same.

Remote Control Key Instructions:

Turn ON/OFF button.
Light up for 2 hours then start radar mode.
Light up for 4 hours then start radar mode.
Light up for 6 hours then start radar mode.
Full radar mode.
Full bright mode.

Important Hints:

Install the lamp according to the provided instructions.
Indicator light colors: Red indicates lack of current and needs urgent charging, yellow indicates current below 70% and can be charged, green indicates sufficient power.
The lamp supports external power supply and solar panel expansion charging. It can be charged with an adapter or solar panel (<5V, 0.1-3A).

* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described/illustrated in the manual may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you acquired.

Installation Points

Require the direction to the southwest and the best installation angle with the horizontal plane. Due to the different latitudes, please refer to the local best installation angle.See Table 1 below.
Require solar panels to be exposed to direct sunlight throughout the day and not to buildings or trees.Wood and other obstruction to ensure the longest exposure time (solar energy must not be used) Plate mounted under glass or indoor). Only by installing solar panels correctly and scientifically can the bestcharging effect be achieved.

Ιnstallation Instructions

Usage Method

Check lights
The solar lamp has been charged before the factory and be can turned on normally, please before installation. Check whether the light can be turned on or off, cover the solar panel with a Book (orKeep it in the dark.If the lights show that the lamps are in good condition, please feel free to install and use them!

Note the following steps when installing during the day
Step 1: Turn on the switch.
Step 1: Cover the solar panels with paper and check if the lights are on, the lamp is normal.
Note: The installation and inspection methods of all the above lamps are roughly the same.

Remote Control Key Instructions

Turn ON/OFF button.
Light up for 2 hours then start radar mode.
Light up for 4 hours then start radar mode.
Light up for 6 hours then start radar mode.
Full radar mode.
Full bright mode.

Important hints

Install the lamp:
Install the lamp correctly at the place where the sunlight can reach, and press the switch, the lamp shall be lighting on normally. After two minutes, the lamp will enter the light sensing mode. If installing during daytime, the lamp shall enter the charging mode without lighting on, and the indicator light shall flash or be on green.If installing at night. the lamp shall continue to light on after two minutes, and the indicator light shall be on normally until the automatic charging and discharging cycle after daylight.

Indicator light:
Red light indicates lack of current and needs to be charged urgently; yellow light indicates that the current is below 70%, indicating that it can be charged; the green light indicates that the power is sufficient.

It supports external power supply and solar panel expansion charging. Solar lamps are often unable to display due to no sunlight in the room or lack of power and no light during indoor display. This lamp can support adapter or solar panel expansion charging < 5V 0,1.- 3A.

Other hints

Please do not connect 220 V AC to avoid damaging solar lights!
Please pay attention to fixing the solar panels and lamps so as not to hurt people when the wind blows.
Please do not disassemble the solar energy lamp, so as not to affect maintenance.
ln order not to affect the use of lights, dean up the dust and dirt on the surface of the solar panels every 3 months.
Solar powered lamps contain batteries.
Batteries are recyclables. Please do not litter.
The battery must be fully charged before It can be used for more than 12 hours.

SOLAR STREET LIGHT LED WITH SOLAR PANEL EMBEDDED, WATERPROOF

TECHNICAL DATA

The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.
Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even serious injury or death. The manufacturer and the importer shall not be liable for injuries and damages resulting from the use of non-conforming equipment.

WARRANTY

The electrical appliances have been manufactured according to strict standards, set by our company, which are aligned with the respective European quality standards. The electrical appliances of our company are provided with a warranty period of 24 months for non-professional use, 12 months for professional use. The warranty is valid from the date of purchase of the product. Proof of the warranty right is the purchase document of the appliance (retail receipt or invoice). Under no circumstances shall the company cover the relevant cost of spare parts and respective required working hours unless a copy of the purchase document is presented. In case the repair has to be done by our service department the cost of transportation (to and from) is entirely borne by the sender (client). The electrical appliances must be sent for repair to the company or to an authorized workshop in the appropriate way and means of transport.

WARRANTY EXEMPTIONS AND RESTRICTIONS:

Spare parts that wear out naturally as a consequence of being used (brushes, cables, switches, chokes etc.).
Electrical appliances damaged as a result of non-compliance with the instructions of the manufacturer.
Electrical appliances poorly maintained.
Electrical appliances given to third entities free of charge.
Damage due to an electrical connection at a voltage other than that indicated on the appliance pla
Connection to a non-earthed power supply.
Change in current voltage.
Damage resulting from the use of salty water.
Damage or malfunction resulting from improper cleaning procedure of the appliance.
Contact of the electrical appliance with chemicals, or damage as a result of moisture or corrosior
Electrical appliances that have been modified or opened by unauthorized personnel.
Electrical appliances used for rent.

The warranty covers only the free of charge replacement of the component that presents a manufacturing defect or material failure. In case of lack of a specific spare part the company reserves the right to replace the electrical appliance with another corresponding model. After all warranty procedures have been concluded, the warranty period of the electrical appliance shall not be extended or renewed. The spare parts or electrical appliances that are replaced remain in the possession of our compan. Requirements, other than those mentioned in this warranty form, regarding the repair of electrical appliances or damage thereof, do not apply. Greek law and relative regulations apply to this warranty.

This appliance is a quality product. It was designed in compliance with current technical standards and made carefully using normal, good quality materials. The warranty period is 24 months for non-professional use and 12 months for professional use and commences on the date of purchase, which can be verified by the receipt, invoice or delivery note. During this warranty period all functional errors, which, despite the careful treatment described in our operating manual, are verifiably due to material flaws, will be rectified by our after-sales service staff. The warranty takes the form that defective parts will be repaired or replaced with perfect parts free of charge at our discretion. Replaced parts will become our property. Repair work or the replacement of individual parts will not extend the warranty period not will it result in a new warranty period being commenced for the appliance. No separate warranty period will commence# for spare parts that may be ted. We cannot offer a warranty for damage and defects on appliances or their parts caused by the use of excessive force, improper treatment and servicing. This also applies for failures to comply with the operating manual and the installation or spare and accessory parts that are not included in our range of products. In the event of interference with of modifications to the appliance by unauthorized persons, the warranty will be rendered void. Damages that are attributable to improper handling, over loading, or natural wear and tear are excluded from the guarantee. Damages caused by the manufacturer or by a material defect will be corrected at no charge by repairor by providing spare parts. The prerequisite is that the equipment is handed over assembled, and complete with the proof of sale and guarantee. For a guarantee claim, only use the original packaging. That way, we can guarantee quick and smooth guarantee processing. Please send us the appliances post-paid or request a Freeway sticker. Unfortunately we will be unable to accept appliances that are not postpaid. The warranty does not cover parts that are subject to nat- ural wear and tear. If you wish to make a warranty claim, report faults or order spare parts or accessories, please contact the aft er-sales center: Subject to change without prior notice.

WWW.NIKOLAOUTOOLS.GR