Audiopipe DJAP-SUB Active Subwoofer Cabinet User Manual

Audiophile **DJAP-SUB Active Subwoofer Cabinet User Manual

**

Safety Precautions

1. Read and keep these instructions. Observe all warnings and follow all Instructions.
2. Do not use this unit near moisture or water.
3. Clean only with dry cloth.
4. Avoid blocking any of the ventilation openings. Install in accordance with the manufacturer’snstructions. The ventilation openings should not be impeded by curtains, close to a wall etc..
5. Do not install near any heat sources such as radiators, heat registers, or other units. (including amplifiers) that produce heat.
6. Do not override the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
7. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the unit.
8.  Only use attachment/accessories specified by the manufacturer.
9. Unplug this unit during lightning storms or when unused for long periods of time.
10. Refer all servicing to qualified service personnel. Servicing is required when the unit has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the unit, unit has been exposed to rain or moisture, does not operate normally, or has been dropped.
11.  Power Sources: This product should be connected to a power supply type described in these operating instructions, or as marked on the unit.
12. Water and Moisture: This product should be kept away from direct contact with liquids. The unit should not be exposed to any sort of liquid dripping with moisture or any containers filled with liquids, such as cups, bottles, or cans.
13. Protective grounded terminal: The unit should be connected to a wall socket outlet with a protective grounded connection.
14. When moving or not using the unit, secure the power cord (e.g., wrap it with a cable tie). Be careful not to damage the power cord. Before using it again, make sure the power cord has not been damaged. If the power cord has been damaged at all, bring the unit and cord to a qualified service technician for repair or replacement as specified by the manufacturer.

• Disconnect power cord before servicing.
• Replace critical components. only with factory parts or recommended equivalent..

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY

Introduction

Thank you for purchasing a DJAP-SUB series Active Subwoofer Cabinet, DJAP-SUB subwoofer cabinets are designed for portable, staged, and fixed installation sound reinforcement. Consisting of 8″, 10″ 12″ 15″, 18″ and dual 18″ subwoofers, the DJAK-SUB series features models perfectly suited for whatever performance requirements you have. These speakers are designed to handle high output power while producing a smooth, precise sound. For prolonged durability and maximum protection against wear and tear, the DJAP-SUB speakers feature MDF wood cabinet construction finished with a durable black textured paint, and black powder-coated perforated steel grill backed with a black cloth.
The DJAP-SUB active subwoofer series is ideal for sound professionals and performers looking for serious output and precision sound quality. Premium- grade materials, advanced construction processes and multiple mounting and suspension options allow for a wide range of live and installed applications. Great pride care is placed in delivering products with excellent performance, specifications, and dependable reliability.
Every Audiophiles PRO audio product is strictly tested and complies with very strict standards. Please carefully read this manual before starting operation! Thank you again for choosing Audiophile PRO,

Features

DJAP-SUB801/1001/1203/1503/1803/18203D

• Active Subwoofer Cabinet
• Active Crossover
• *Impedance 8 ohms/4 ohms (DJAP-SUB18203D)
• MDF Wood Cabinet, Resistant Black Paint, Metal Grill, Rubber Foot
• One Metal Standard Pole-mount
• Power Voltage: AC115V & AC230V

Back Panel Description

DJAP-SUB801/DJAP-SUB1001

1. LINE OUTPUT
   Low Bass Frequency Range Output on XLR connector.

2. LINE INPUT
   Line Input on 1/4″ Jack or RCA connector.

3. BASS CONTROL
   Adjust the Bass Frequency Control

4. VOLUME CONTROL
   Volume Main Power Amplifier Control

5. POWER SWITCH SELECTOR
   Change AC Power Between 115V and 230V

6. POWER SUPPLY SWITCH
   ON/OFF Main Power Switch.

7. POWER SUPPLY INPUT CONNECTOR
   Input AC Power Socket with Main Fuse.

Back Panel Description

DJAP-SUB1203/DJAP-SUB1503/DJAP-SUB1803

1. LINE OUTPUT
   Full Frequency Range Output on XLR connector.

2. LINE INPUT
   Line Input on 1/4″ Jack or XLR connector.

3. BASS CONTROL
   Adjust the Bass Frequency Control.

4. VOLUME CONTROL
   Volume Main Power Amplifier Control.

5. HIGH PASS FILTER
   High Pass Preamplifier Output on 2 x XLR connector.

6. POWER SWITCH SELECTOR
   Change AC Power Between 115V and 230V.

7. POWER SUPPLY SWITCH
   ON/OFF Main Power Switch.

8. POWER SUPPLY INPUT CONNECTOR
   Input AC Power Socket with Main Fuse.

Back Panel Description

DJAP-SUB18203D

1. LINE OUTPUT
   Full Frequency Range Output on XLR connector.

2. LINE INPUT
   Line Input on 1/4″ Jack or XLR connector.

3. BASS CONTROL
   Adjust the Bass Frequency Control.

4. VOLUME CONTROL
   Volume Main Power Amplifier Control,

5. HIGH PASS FILTER
   High Pass Preamplifier Output on 2 x XLR connector.

6. POWER SWITCH SELECTOR
   Change AC Power Between 115V and 230V.

7. POWER SUPPLY SWITCH
   ON/OFF Main Power Switch.

8. POWER SUPPLY INPUT CONNECTOR
   Input AC Power Socket with Main Fuse.

CONNECTION PLATE

1. Make your initial connections with all the equipment powered off and ensure that all the main volume controls are turned completely off.
2. Connect one side of the signal cable to your audio mixer OUTPUT LEFT/RIGHT, and the other side of the cable. into the LINE INPUT of your active subwoofers. 3. Connect one side of signal cable to your active subwoofers LINK LEFT/RIGHT or OUT LEFT/RIGHT and the other side of the cable into the LINE INPUT LEFT/RIGHT of your active satellite speakers.
3. Connect the power cords to a safe ground socket.
4. Turn on your mixer first, then the active speaker cabinets.
5. Turn up the volume controls of the active speaker cabinets,
6. Use PFL function to get the proper input level for the mixer and adjust the Main Mix Level.
7. After using, turn off your active speaker cabinets first, then the mixer.

When mounting a cabinet onto any stand, always ensure that the stand is on a flat, level surface, with the legs fully extended, make sure to check that the maximum load weight for the stands is greater than the weight of the Audiophile cabinet. Never use a stand with a maximum load weight lower than the cabinet. Do not attempt to mount more than one cabinet on a stand at one time. The Audiophile cabinets are heavy. It is recommended that a second person helps place the cabinet on a stand. When the cabinet is placed on a stand, always check the reliability and center of gravity of the system.

If the cabinet can be tipped easily, or the pole is swaying, it is recommended that you lower the height of the stand. Position the stand and route cables so that the performers and the audience cannot tip over or trip on the system.

OPTIONAL CONFIGURATIONS

Mono Sub Operation

In most cases, a common (mono)sub bass setup is preferable. Low frequencies produced by a subwoofer tend to be non-directional. Since low frequency waves take so much space to develop, it is difficult for the ear to tell if sub bass is coming from the left or right side (unless you are in a very large room). Because of this phenomenon, just about all sub bass material is mixed in mono.

Stereo Sub Operation

In larger rooms, as well as in theaters and theme park installations (for low frequency special audio effects), two or more subwoofers can be used in stereo. For additional low-end, you can daisy chain a pair of subwoofers to each side of your speaker system using the parallel outputs.

Sound effects with the Subwoofer

The placement of the subwoofer can affect the overall performance of your system since room acoustics may create standing waves, an acoustical phenomenon that causes certain bass frequencies to sound louder. Here are a few points you should consider when setting up your system, which can help you achieve optimal performance in your space.
The ideal placement of the subwoofer is as close to the main front of house speakers as possible, in order to blend the satellites and subwoofer. Mounting the satellite speakers on top of the subwoofer allows you to align the drivers. The closer the subwoofer is to a wall, the louder the bass frequencies will sound, and you can adjust the mix between the subwoofer and satellite speakers by moving the subwoofer closer to and further from a wall.
Avoid placing the subwoofer in a corner. This can make the subwoofer appear to be louder, but only for a limited frequency band, and will make the mix sound “boomy” and not well defined. The best way toncrease the overall level of bass is to add a second subwoofer.

Frequency Response Diagram

Wire Connections

Either the 1/4″ TRS phone jack or XLR connector can be wired in balanced and unbalanced modes. which will be determined by the actual application status, please wire your system as follows wiring examples,

For 1/4″Phone jack

• TS Type Unbalanced

• TRS Type Balanced

• TRS Type Unbalanced

For XLR connector

• XLR Type Unbalanced

• XLR Type Balanced

In-line Connection

For these applications the unit provides 1/4″ TRS and XLR connectors to easily interface with confessional audio devices. Follow the configuration examples below for your particular connection.

• Balanced
  

• Unbalanced
  

TECHNICAL SPECIFICATIONS

Indicator / Phase Switch
Power Supply| AC115V & AC230V
Enclosure Construction| MDF Wood Cabinet, Resistant Black Paint, Metal Grill
Mounting Information| One Metal Standard Pole-mount
Dimension (HxWxD)| 400 x 360 x 272mm (15.7″ x 14.2″ x 10.7″)
Net Weight| 12Kg/ 26.5 lbs
Model Active| DJAP-SUB1001
---|---
System Type| 10″ Active Subwoofer Speaker Cabinet
Qutput Power| 400W Continuous , 800W Program
SPL (1w/1m)| 94 dB /120 dB Max.
Frequency Response| 51 Hz- 122 Hz (-6 dB)
Impedance| 8 ohms
Transducer Low| 10″ (266mm) Woofer, 2.5″ (65mm) Voice Coil
Active Crossover| 160 Hz under analog processor
Input Connectors| 1/4″ Jack , RCA
Qutput Connector| XLR
External Connectors| Volume Control / Power, Signal, Clip Limiter LED Indicator / Phase Switch
Power Supply| AC 115V & AC230V
Enclosure Construction| MDF Wood Cabinet, Resistant Black Paint, Metal Grill
Mounting Information| One Metal Standard Pole-mount
Dimension (HxWxD)| 465×420 x325mm (18.3″ x16.5″ x 12.8″)
Net Weight| 19Kg/41.9 Ibs
Model Active| DJAP-SUB1203
---|---
System Type| 12″ Active Subwoofer Speaker Cabinet
Output Power| 500W Continuous, 1000W Program
SPL (1w/1m)| 96 dB /123 dB Max.
Frequency Response| 46 Hz- 125 Hz (-6 dB)
Impedance| 8 ohms
Transducer Low| 12″ (318mm) Woofer, 2.5″ (65mm) Voice Coil
Active Crossover| HPF /250 Hz under analog processor
Input Connectors| 1/4″ Jack, XLR
Output Connector| XLR
External Connectors| Volume Control / Power, Signal, Clip Limiter LED Indicator / Phase Switch / High Pass Preamplifier Output
Power Supply| AC115V & AC 230V
Enclosure Construction| MDF Wood Cabinet, Resistant Black Paint, Metal Grill
Mounting Information| One Metal Standard Pole-mount
Dimension (HxWxD)| 530x480x370mm (20.9″x 18.9″ x 14.6″)
Net Weight| 1Kg /46 Ibs
Model Active| DJAI UB1503
---|---
System Type| 15″ Active Subwoofer Speaker Cabinet
Output Power| 600W Continuous, 1200W Program
SPL (1w/1m)| 95dB/122.8 dB Max.
Frequency Response| 43 Hz- 130 Hz (-6 dB)
Impedance| 8 ohms
Transducer Low| 15″ (382mm) Woofer, 2.5″ (65mm) Voice Coil
Active Crossover| HPF /250 Hz under analog processor
Input Connectors| 1/4″ Jack, XLR
Output Connector| XLR
External Connectors| Volume Control / Power, Signal, Clip Limiter LED Indicator / Phase Switch / High Pass Preamplifier Output
Power Supply| AC 115V & AC 230V
Enclosure Construction| MDF Wood Cabinet, Resistant Black Paint, Metal Grill
Mounting Information| One Metal Standard Pole-mount
Dimension (HxWxD)| 580x 480 x450mm (22.8″x 18.9″ x 17.7″)
Net Weight| 29Kg /64 Ibs
Model Active| DJAP-SUB1803
---|---
System Type| 18″ Active Subwoofer Speaker Cabinet
Output Power| 700W Continuous, 1400W Program
SPL (1w/1m)| 96 dB /124.5 dB Max.
Frequency Response| 40 Hz- 130 Hz (-6 dB)
Impedance| 8ohms
Transducer Low| 18″ (462mm) Woofer, 4″ (L00mm) Voice Coil
Active Crossover| HPF /250 Hz under analog processor
Input Connectors| 1/4″ Jack , XLR
Output Connector| XLR
External Connectors| Volume Control / Power, Signal, Clip Limiter LED Indicator / Phase Switch / High Pass Preamplifier Output
Power Supply| AC 115V & AC 230V
Enclosure Construction| MDF Wood Cabinet, Resistant Black Paint, Metal Grill
Mounting Information| One Metal Standard Pole-mount
Dimension (HxWxD)| 660 x 515x 535mm (26″ x20.3″ x 21″)
Net Weight| 39Kg /86 Ibs
Model Active| DJAI UB18203D
---|---
System Type| 18″ Active Subwoofer Speaker Cabinet
Output Power| 1400W Continuous, 2800W Program
SPL (1w/1m)| 96 dB/127.5 dB Max.
Frequency Response| 40 Hz- 130 Hz (-6 dB)
Impedance| 4ohms
Transducer Low| 18″ (462mm) Woofer, 4″ (100mm) Voice Coil
Active Crossover| HPF /250 Hz under analog processor
Input Connectors| 1/4″ Jack , XLR
Output Connector| XLR
External Connectors| Volume Control / Power, Signal, Clip Limiter LED Indicator / Phase Switch / High Pass Preamplifier Output
Power Supply| AC115V & AC 230V
Enclosure Construction| MDF Wood Cabinet, Resistant Black Paint, Metal Grill
Mounting Information| One Metal Standard Pole-mount
Dimension (HxWxD)| 1000 x 515 x 535mm (39.4″ x 20.3″ x 21″)
Net Weight| 53Kg/116.8 Ibs

Audiophile PRODUCT REGISTRATION CARD

Thank you for selecting a high-quality product from Adipose. We hope you are completely satisfied with your purchase and would like to serve you better by finding out more about your purchase. Please take a few minutes to filled out the registration information on this card. Once you have filed out the card please return it to Audiophile within 10 days of your purchase. Your answers will be kept strictly confidential. We appreciate your response!

1. PROOF OF THE DATE OF PURCHASE WILL BE REQUIRED FOR WARRANTY SERVICE OF THIS PRODUCT. INFORMATION ABOUT AUDIOPIPE WARRANTY SERVICE CENTERS MAY AL SO BE OBTAINED BY CONTACTING OR WRITING Audiophile INC. AT THE ADDRESS LISTED ON THE FRONT OF THIS CARD. 2. This warranty will become void if service is performed by anyone other than an approved Audiophile Warranty Service Center.
2. This warranty does not apply to any product which has been subject to misuse, neglect, involved in an accident or has had the serial number altered, defaced and/or repaired or has been connected, installed, adjusted and/or repaired other than in accordance with the instructions furnished by Audiophile Inc.
3. his warranty does not cover static or electrical interference, tape head cleaning or space adjustments or the labor costs associated with the reinstallation of the unit for repair.
4. The sole responsibility of Audiopipe Inc. under this warranty shall be limited to the repair or replacement at the sole discretion of Audiopipe Inc.
5. If it becomes necessary to send the product or any defective part to Audiophile Inc. or an Authorized Warranty Service Center, the product must be shipped in its original carton or an equivalent carton, fully insured with shipping charges prepaid. Audiophile Inc. will not assume responsibility for any loss or damage incurred in shipping.
6. ALL IMPLIED WARRANTIES EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW
7. ALL HAVE NO GREATER DURATION THAN THE WARRANTY PERIOD SET FORTH ABOVE. UNDER NO CIRCUMSTANCES SHALL Audiophile INC. BE LIABLE FOR ANY LOSS OR DAMAGE, DIRECT OR CONSEQUENTIAL OR EXCLUSIONS OR LIMITATIONS OF THE INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT BECAUSE SOME STATES DO NOT ALL OW LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS. THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.
8. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE.
9. Should you have any difficulties with the performance of this product during the warranty or with any Audiophile Authorized Service Center, you may contact the Audiophile National Service Mangers at the address listed on the front of this card or E-mail us at tech@audiopipe.com

Useful Data

Please write your serial number here for future reference.

1. 2. What is the name of the store where you purchased this product?
      

2. What is the model number and serial number of your purchased product?
   

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>