BORMANN PRO BTS2105 Drapano Base with Vise Instruction Manual
- October 30, 2023
- BORMANN PRO
Table of Contents
BORMANN PRO BTS2105 Drapano Base with Vise
Product Information
The BTS2105 036531 is a drilling machine manufactured by Bormann Tools. The
product dimensions are 225160500mm and the drilling depth is 60mm. It has a
holding diameter of 43mm. The product comes with assembly instructions and
necessary assembly tools. The depth stop can be adjusted using an Allen
wrench. Note that the manufacturer reserves the right to make minor changes to
product design and technical specifications without prior notice unless these
changes significantly affect the performance and safety of the products. The
parts described/illustrated in the pages of the manual that you hold in your
hands may also concern other models of the manufacturer’s product line with
similar features and may not be included in the product you just acquired.
Please note that this equipment has not been designed for use in commercial, trade, or industrial applications. The warranty will be voided if the machine is used in commercial, trade, or industrial businesses or for equivalent purposes. To ensure the safety and reliability of the product and the warranty validity, all repairs, inspection, repair, or replacement work, including maintenance and special adjustments must only be carried out by technicians of the authorized service department of the manufacturer.
Product Usage Instructions
- Assemble the BTS2105 036531 by following the assembly instructions provided in the manual.
- Adjust the depth stop to the desired depth using an Allen wrench.
- Place the material to be drilled onto the holding diameter of the machine.
- Turn on the machine and begin drilling by lowering the drill bit onto the material.
- After drilling is complete, turn off the machine and remove the material from the holding diameter.
Note that this product is not intended for use in commercial, trade, or industrial applications.
Assembly instructions
Necessary assembly tools
Adjustment of the depth stop: Alter the gage to desired depth and tighten using the Allen wrench
Technical Data
Technical Data
Dimensions:| 225160500mm
Drilling depth:| 60mm
Holding dia.:| 43mm
- The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described/illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
- Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade, or industrial businesses or for equivalent purposes.
- To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair, or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.