BOYA BY-V4U Four Channel Wireless Microphone System User Manual

June 7, 2024
Boya

BY-V4U Four Channel Wireless Microphone System

BY-V4U-Four-Channel-Wireless-Microphone-System-produvt

Statement

Please read this manual carefully before using and strictly operate and store it in accordance with the instructions. Please save the manual for your future reference. If you need further assistance than the user manual, please consult your retailer for help or email us: sales@boya-mic.com

Cautions

  1. Non-professional teardown is strictly prohibited.
  2. Please keep it away from heat sources such as radiators or spotlights.
  3.  Do not remove the battery without professionals’ help.
  4. Please clean the device with only a soft, dry cloth.
  5. When using and storing, please keep away from the dust and moisture.
  6. For the best pick-up pattern, do not hold your hand against the microphone capsule cover.

General Introduction

The BY-V4/ BY-V4U kit, a four-channel wireless microphone system, has four sound sources miked up simultaneously with ease. The kits can record multiple sound sources for 4-person performances, conferences, speeches, podcasts, vlogging, mobile journalism, and more.
Built-in omnidirectional microphone, the transmitter features 360 degrees of sound pickup. It also boasts high-performance noise cancellation, which is available for improving the recording effect in a noisy environment.

The BY-V4 kit features 3.5mm TRS analog audio output for cameras, mixers, etc. The BY-V4U kit features USB-C/ iOS Lightning digital audio output for smartphones, tablets, computers, and other mobile devices. In addition, the receivers have USB-C charging ports, which support charging and powering of devices while in use.

  • The BY-V4/ BY-V4U operates on the 2.4GHz spectrum and automatically hops to free channels to avoid static noise and audio dropouts.

Features

  • Up to 200 meters of wireless transmission without obstacles
  • High-performance noise cancellation algorithms – 48kHz HD audio format retained
  • Wide-range 20-20,000Hz frequency response – deliver exceptional high-quality sound
  • Up to 6 hours of operating time for a transmitter
  • 3.5mm TRS analog output, USB-C and iOS Lightning digital output – universal compatibility with cameras, smartphones and computers
  • Enable the device’s speaker without unplugging the receiver
  • 360° rotating back clip on transmitter
  • Charging case included – make the kit easy to carry on

Product Structure

Wireless Transmitter (BY-V4-TX)

  1. BY-V4U-Four-Channel-Wireless-Microphone-System- \(2\) Built-in Microphone
  2. Status Indicator
    Status| Indicator
    ---|---
    Unpaired| Blinking blue and red alternately
    Pairing| Blinking blue rapidly
    Paired successfully| Static blue
    Microphone Muted| Blinking blue slowly
    Noise cancellation enabled| Static green
    Maximum/ Minimum gain| Blinking blue 3 times rapidly
    Low battery| Blinking red
    Charging (in shutdown mode)| Static red

NOTE:

  * If charging the unit when it is ON, the indicator will display the current working status instead of charging status.
  * Please charge the transmitter when TX indicates low battery status, or it will automatically shut off within 10 minutes.
  * The noise cancellation feature cannot be enabled or disabled when the microphone is muted.
  1. Power Button

    • Press and hold for 2 seconds to power on or off.
    • Press to mute or unmute the microphone.
    • Press and hold for 5 seconds to enter pairing status in shutdown mode.
  2. NR Button
    Press to enable or disable the noise cancellation.

  3. Belt Clip
    It can rotate 360 degrees.

  4. USB-C Charging Port
    For charging the transmitter.

  5. Charging Contacts

  6. Foam Windscreen

3.5mm TRS Receiver (BY-V4-RX35)

  1. BY-V4U-Four-Channel-Wireless-Microphone-System- \(3\) USB-C Connecto
    It can be connected to a smartphone, tablet, computer, and other mobile devices featuring a USB-C port.

  2. USB-C Charging Port
    When the BY-V4-RXU receiver is plugged into an external device, the external device can be powered via this charging port.
    NOTE: Most mobile devices featuring a USB-C or Lightning port can be powered and charged through this port while in use.

  3. Speaker Switch
    Toggle to enable or disable the phone’s speaker.

  4. Status Indicator
    Status| Indicator
    ---|---
    Unpaired| Blinking blue slowly
    Pairing| Blinking blue rapidly
    Paired Successfully| Static blue

  5. Pair Pinhole
    Insert the included pairing pin into the hole and press to enter pairing state.

  6. USB-C to Lightning Adapter
    It can be connected to an iOS device featuring a Lightning port.

Charging Case (BY-V4-CC)

  1. BY-V4U-Four-Channel-Wireless-Microphone-System- \(4\) Charging Indicator BY-V4U-Four-Channel-Wireless-Microphone-System- \(5\)
  2. USB-C Charging Port

How to Use

For the kit of BY-V4U

  1. Connect the receiver to the USB-C port of a mobile device such as a smartphone, tablet, or computer, or attach the receiver to an iOS Lightning device using the included USB-C to Lightning Adapter.

  2.  Press and hold the power buttons for 2 seconds to turn on the transmitter(s).

  3. Pairing
    The transmitter(s) and receiver are paired by default. If they are disconnected, please follow the below steps:

  4. To make the transmitter(s) enter the pairing state, press and hold its power button for 5 seconds in shutdown mode until its status indicator blinks blue rapidly.

  5. Then, insert the included pairing pin into the small pinhole on the receiver and press once. The receiver enters the pairing mode and its indicator will blink blue quickly.

  6. Transmitter(s) and receiver will be successfully paired within 10 seconds. Their status indicators glow static blue.

  7. Launch a video or audio recording app. Then, select external microphone, if applicable (app-dependent).

  8. It is recommended to record a sample and play it back to check if the audio level is acceptable before recording.

  9.  To improve the recording effect in a noisy environment, it is recommended that press the button on the transmitter(s) to enable noise cancellation.

  10. Slide receiver to enable the phone’s speaker. Sound can be played directly without unplugging the receiver.

NOTE :

  • If you use the receiver with more than one transmitter, you will need to set up the receiver first and then pair the transmitters with it in turn.
  • Due to 2.4GHz wireless frequency, signal can be easily attenuated. Please try to avoid obstacles, such as walls and buildings, and avoid close proximity to devices with 2.4GHz signal, such as high-power Wi-Fi antennas, radios, etc.

Troubleshooting

If you encounter problems when using the unit, please refer to the following checklist before contacting technical support. If the problem cannot be solved, please contact the dealer’s after-sales service department.

No sound

  1. Make sure the transmitter and receiver are paired, and the receiver light glows static blue.
  2. Make sure the microphone is not currently muted. If the transmitter’s indicator blinks blue slowly, press its power button to unmute the microphone.

Operating range is limited, sound changes, or noise appears

  1. Make sure there is no interference from high-power wireless routers or devices in your recording environment. If the recording environment can’t be changed, you need to find the best distance and angle to record.
  2. Due to 2.4GHz wireless frequency, signal can be easily attenuated. Please try to avoid obstacles, such as walls and buildings, and avoid close proximity to devices with 2.4GHz signal, such as high-power Wi-Fi antennas, radios, etc.
  3. Make sure the receiver is well connected to your device properly.

A unit doesn’t power on
If the battery is completely depleted due to the unit has not been used for a long time, charge the unit.

The units automatically shut down
Both the transmitter and 3.5 mm TRS receiver will automatically power down after minutes if they aren’t paired.

The transmitter doesn’t enter the pairing state
Turn on the transmitter, press and hold its power button for 5 seconds until its status indicator blinks blue rapidly to pair again.

Can’t pair when four transmitters need to be paired with a receiver

  1. Make sure that the transmitters are paired with the receiver one by one, not at the same time. Only when a transmitter is paired with the receiver, can the second transmitter be paired with it.
  2. If a transmitter fails to be paired with a receiver, turn the transmitter off and press and hold its power button for 5 seconds to pair again.

Charging case can’t charge the transmitter(s) or receiver

  1. If the remaining charge of the charging case is too low, please recharge the case. Try again.
  2. Wipe the charging contacts on the transmitter(s), receiver, and charging pins in the case with a clean cloth. Make sure there is no dirt covering them.
  3. If the touch points are not firmly connected due to a lack of magnetic force, please contact BOYA after-sales support.

The indicator doesn’t display charge status
Only if the transmitter and 3.5mm TRS receiver are turned on, do their indicators display the charge status while charging.

Specifications

BY-V4-TX Transmitter

BY-V4U-Four-Channel-Wireless-Microphone-System- \(1\)

BY-V4-RXU Receiver BY-V4U-Four-Channel-Wireless-Microphone-System-
\(1\)

BY-V4-CC Charging Case BY-V4U-Four-Channel-Wireless-Microphone-System-
\(1\)

In the Box

BY-V4U-Four-Channel-Wireless-Microphone-System- \(1\)

www.boya-mic.com

SHENZHEN JIAYZ PHOTO INDUSTRIAL., LTD.
The BOYA logo is a trademark which is registered and owned
by Shenzhen Jiayz Photo Industrial., Ltd.
TEL: 400 6131096
Email: sales@boya-mic.com www.boya- mic.com / www.jiayz.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals