FEIERDUN C8i Elliptical Machine Cross Trainer Instruction Manual
- June 16, 2024
- FEIERDUN
Table of Contents
FEIERDUN C8i Elliptical Machine Cross Trainer
Product Information
- Specifications
- Model: Feier-EM-01
- Item Type: Control Center
- Display: LED display with multiple modes
- Heart Rate Range: Real-time heart rate if supported, otherwise off
- Level Range: 1 to 32
- Scan Mode: ON (Scan mode), OFF (Lock mode)
- Speed Range: 0.0 to 9999 km/h
- Time Range: 00:00 to 99:59
- Distance Range: 0.0 to 9999 km
- Calories Range: 0.0 to 9999 Kcal (related to resistance level)
- Bluetooth State: ON (BT connected), OFF (BT not connected)
Product Usage Instructions
- How to Connect the KINOMAP App
- Search for “KINOMAP” in the mobile app store and download the app.
- After the download is completed, open the app and register your personal information.
- Turn on the Bluetooth of your mobile phone and ensure that the transmitter is powered on and in the wake-up state.
- Add the sports equipment by following the instructions provided in the app.
- Once the equipment is added, you can start your exercise.
- How to Get Good After-sales Service
- If you encounter any problems during installation or use, please contact our after-sales team at feierdun01@sina.com. We will do our best to serve you.
- How to Use the Control Center
- The control center has a display with multiple modes and functions. Here is a description of the item types and their corresponding displays:
Item Description
| Item Type | Display |
|---|---|
| Heart rate | BPM (Real-time heart rate if supported, otherwise off) |
| Level | 1 to 32 |
| Scan mode | ON (Scan mode), OFF (Lock mode) |
| Speed | 0.0 to 9999 km/h |
| Time | 00:00 to 99:59 (Start timing when movement is detected, and |
stop timing when there is no movement for 4 seconds)
Distance| 0.0 to 9999 km
Calories| 0.0 to 9999 Kcal (Related to the resistance level: LEVEL 1-11.4
Kcal/km, LEVEL 32-44.6 Kcal/km)
BT state| ON (BT connected), OFF (BT not connected)
- Display Description
- The control center has different display modes:
- Overview: 24 effect lights on the outer ring, heart rate, resistance level, speed, time, distance, calories, and Bluetooth connection status are displayed.
- SCAN mode: All data are shown in rotation and switched every 3 seconds. Heart rate and level are displayed in a small window, and speed, time, distance, and calories are displayed in the main window. The Bluetooth LED lights up if connected.
- LOCK mode: Press the knob to switch the display mode and lock the data you want to see. One of speed, time, distance, or calories is shown in the main window. Heart rate and level are displayed in a small window. 24 effect LEDs light up during the MOTION state.
- E01 Error
- If the display shows an E01 error, it may be due to poor contact with the junction port. To resolve this issue:
- Disconnect the power supply.
- Redock the console’s junction port.
- Reconnect the power supply and adjust the middle of the block to see if the display is normal.
- If the problem persists, please contact us the first time for parts replacement service.
- Frequently Asked Questions (FAQ)
- Q: How do I connect the KINOMAP app?
- A: Please follow the instructions provided in the user manual or refer to the “How to Connect the KINOMAP App” section above.
- Q: How can I get good after-sales service?
- A: If you encounter any problems during installation or use, please contact our after-sales team at feierdun01@sina.com.
- Q: What should I do if I see an E01 error on the display?
- A: Please refer to the “E01 Error” section above for troubleshooting steps. If the problem persists, please contact us for further assistance.
INSTRUCTIONS
How to connect the APP？
Please note that the following conditions need to be met before connecting:
- The IOS mobile phone system must not be lower than version 7.1 and must support Bluetooth BLE 4.2, iPhone 4S or above mobile phones.
- The Android system is required to be version 4.3 or above, and it needs to support Bluetooth BLE 4.2.
- The wireless transmitter in the device only records the user’s data and sends it to the mobile APP when it is connected to the mobile phone. Before starting the sports equipment, please connect the application to the equipment to ensure that the data recorded in the mobile application is valid.
- When the transmitter does not receive any signal for 4 minutes, it will enter sleep mode. In sleep mode, the mobile phone will not be able to search for the transmitter. At this time, you need to use the device to wake up the Bluetooth transmitter.
Description of “KINOMAP” connection
Tips: Since the KINOMAP official software connection steps will be
updated in
real-time, this connection process is only for reference.
- Search “KINOMAP” in the mobile app store to download the app.
- E-mail：feierdun01@sina.com.
- After the download is completed, open the app and register your personal information. Turn on the Bluetooth of the mobile phone to ensure that the transmitter is powered on and in the wake-up state.
- Add sports equipment as follows:
- Add equipment to complete, and start your exercise!
- NOTE！
- Our Products Model: Feier-EM-01
How to get a good after-sales service?
- Thank you very much for choosing our products, we will do our best to serve you, if you encounter any problems during installation or use, please contact our after-sales team first!
- E-mail：feierdun01@sina.com.
How is the control center used?
- Item description
- Display description
- Main Operation Instructions
- Detailed Operation Instructions
- After energized, The BUZZER beeps, and the knob lights up and enters the “READY” state (Figure 1);
- After power-on, the resistance level automatically reset to “1”.No operation for 3 minutes, the display is off and enters a standby state.(Figure 2)
- In “READY” state, Riding or a short press to enter the “MOTION” state. “HEART RATE” and “LEVEL” switch every 3s (Figure 3, Figure 4), if “HEART RATE” is supported. Otherwise, Only “LEVEL” lights up
- “Speed”&”Time”&”Distance”&”Calories” are shown in the main window in default “SCAN” mode.“SCAN” lights up， and The datas switch every 3s. (Figure 5, Figure 6, Figure 7, Figure 8)
- A short press to enter “LOCK” mode, “SCAN” is off. The locked data can be: “Speed”/”Time”/”Distance”/”Calories”(Figure 9, Figure 10, Figure 11, Figure 12)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>