nVent RBM2660DC Lenton Pouring Basin Frame Instruction Manual
- June 15, 2024
- nVent
Table of Contents
nVent RBM2660DC Lenton Pouring Basin Frame
Product Information
Specifications
- Material : Steel
- Length : 246 mm
- Width : 158 mm
- Height : 76 mm
- Chain Length : 965 mm
Product Features
- Spiral handles are used to securely close the pouring basin and help insulate the operator from the heat of the pouring basin.
- Chain securely holds the pouring basin to the sleeve.
- Durable, re-usable, and long-lasting.
Additional Product Details
Prior to installation, please read and understand all of the detailed
instructions and safety notices provided in the nVent LENTON Cadweld Rebar
Splicing System instruction manual.
Diagrams
Warning
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials. Improper installation,
misuse, misapplication, or another failure to completely follow nVent’s
instructions and warnings may cause product malfunction, property damage,
serious bodily injury, and death, and/or void your warranty. Prior to
installation, please read and understand all of the detailed instructions and
safety notices provided in the nVent LENTON Cadweld Rebar Splicing System
instruction manual.
Contact Information
- North America +1.800.753.9221
- Option 1 – Customer Care
- Option 2 – Technical Support
- Europe Netherlands: +31 800-0200135
- France: +33 800 901 793
- Europe Germany: 800 1890272
- Other Countries: +31 13 5835404
- APAC Shanghai: + 86 21 2412 1618/19
- Sydney: +61 2 9751 8500
Brands
Our powerful portfolio of brands:
- nVent.com
- CADDY
- ERICO
- HOFFMAN
- RAYCHEM
- SCHROFF
- TRACER
Disclaimer
All trademarks are the property of their respective owners. nVent reserves
the right to change specifications without notice.
Product Usage Instructions
Installation
- Ensure you have read and understood the detailed instructions and safety notices provided in the nVent LENTON Cadweld Rebar Splicing System instruction manual.
- Gather all necessary tools and equipment for installation.
- Position the pouring basin frame vertically in the desired location.
- Securely close the pouring basin using the spiral handles.
- Attach the chain to the pouring basin and securely hold it to the sleeve.
Maintenance
To ensure the longevity of the product, regular maintenance is recommended. Follow these steps:
- Inspect the pouring basin frame for any signs of damage or wear.
- If any damage is found, replace or repair the frame as necessary.
- Clean the pouring basin frame regularly to remove any debris or contaminants.
- Apply a suitable lubricant to the spiral handles to maintain their functionality.
- Check the chain for any signs of damage or weakness. Replace if necessary.
Safety Precautions
When using the pouring basin frame, it is important to follow these safety precautions:
- Always wear appropriate personal protective equipment, including heat-resistant gloves, when handling hot pouring basins.
- Avoid direct contact with the pouring basin to prevent burns.
- Ensure the pouring basin frame is securely closed and the chain is properly attached to prevent accidents.
- Do not exceed the maximum weight capacity of the pouring basin frame.
- Keep the pouring basin frame away from flammable materials and sources of ignition.
Storage
When the pouring basin frame is not in use, store it in a cool, dry place away
from direct sunlight and moisture. Ensure it is protected from any potential
damage or impact.
Cleaning
To clean the pouring basin frame, follow these steps:
- Remove any excess debris or residue from the frame using a soft brush or cloth.
- Dampen a cloth with mild soap and water solution.
- Gently wipe the entire surface of the pouring basin frame to remove dirt and grime.
- Rinse the cloth with clean water and wipe away any soap residue.
- Dry the pouring basin frame thoroughly before storing or reusing.
Disposal
When disposing of the pouring basin frame, follow local regulations and
guidelines for proper waste disposal. If possible, recycle the steel
components.
FAQ’s
Can the pouring basin frame be used with different pouring basins?
Yes, the pouring basin frame is designed to be compatible with different pouring basins. However, ensure that the dimensions and weight capacity of the pouring basin frame are suitable for the specific pouring basin you intend to use.
Is the pouring basin frame suitable for both indoor and outdoor use?
Yes, the pouring basin frame is suitable for both indoor and outdoor use. However, it is recommended to protect the frame from prolonged exposure to harsh weather conditions to ensure its longevity.
Can the chain length be adjusted?
No, the chain length of the pouring basin frame is fixed at 965 mm. It is important to ensure that this length is suitable for your specific application.
How often should I inspect and maintain the pouring basin frame?
Regular inspections and maintenance are recommended to ensure the proper functioning and longevity of the pouring basin frame. Inspect the frame at least once every six months or more frequently if it is subjected to heavy usage or harsh conditions.
Can I use the pouring basin frame with other rebar splicing systems?
The pouring basin frame is specifically designed for use with the nVent LENTON Cadweld Rebar Splicing System. It is not recommended to use it with other systems without proper consultation and verification of compatibility.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent