BORMANN BAT6170 Tire Air Gauge Instructions

BORMANN BAT6170 Tire Air Gauge

Product Information

The BAT6170 is a pneumatic tool designed for pumping air with a maximum pressure of 12 bar. The tool comes with a hose adapter, hose, air supply connection, trigger, manometer, and pressure reduction valve. The product is manufactured by Nikolaou Tools and may undergo minor changes in product design and technical specifications without prior notice. The parts described in the
the manual may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.

Product Usage Instructions

1. Read the manual carefully before using the tool.
2. Wear a dust mask, protective gloves, and safety glasses before operating the tool.
3. Ensure that the tool is calibrated before putting it into operation.
4. Connect the hose adapter to the air supply connection.
5. Attach the hose to the hose adapter.
6. Adjust the pressure reduction valve as required.
7. Press the trigger to pump air. The pressure value will appear only once the trigger has been released.
8. After use, turn off the air supply and disconnect the hose from the tool.
9. Maintain the tool regularly to ensure its safety and reliability. All repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer

SAFETY INSTRUCTIONS

Warning: Read the manual carefully before use. Failure to follow the warnings and instructions may result in tool damage, physical injury and/or damage to property. Save the manual in a safe place for future reference.

• Do not direct the outlet of the tool towards yourself or others. Coating materials and compressed air may cause injuries.
• Installation, adjustments and assembly of the tool must only be carried out by qualified and trained personnel.
• Do not modify the tool in any way. Modifications may impair the efficiency of the tool and render it unsafe for use.
• Do not use the tool if it is damaged.
• The tool is designed to work with compressed air only. Do not use any other gas to power the tool as this can cause fires or explosions.
• While connecting the tool to a compressed air system, make sure to consider the space which is required for the hose in order to avoid damage to the hose or to the connectors.
• The working area must be equipped with an efficient ventilation system. Absence of an efficient ventilation system may pose a hazard or cause fires or explosions.
• The tool must not under any circumstances be used in explosive atmospheres.
• The tool must be operated at a safe distance from fire and other sources of heat.
• Wear personal protective equipment such as safety glasses, masks and gloves.
• During operation of the tool and while carrying out maintenance tasks there is a risk of ingestion of particles of sprayed materials or substances used for maintenance due to the following causes:
  • Insufficient ventilation.
  • Incorrect spraying pressure.
  • Insufficient optimisation of spraying parameters in order to reduce contamination.
  • Incorrect distance between the nozzle of the tool and the area of application of the sprayed material. The distance must be adequately adjusted in accordance with the kind of sprayed substance.
  • Ingestion of solvent vapours or other harmful substances.
  • Use of incorrect sprayed substance.
• Never leave the tool unattended by a person authorised to operate it.
• Do not allow children near the tool.
• Compressed air under high pressure may cause the tool to recoil in an opposite direction to the direction of ejection of the sprayed material. Take special precautions to minimize the risk of injury due to recoil.
• Before operating the tool, make sure to test it first to ensure that it works properly.
• Ensure that all persons operating the tool are familiar with the instructions contained in this manual.
• Observe the instructions and recommendations specified by the manufacturer of the sprayed materials in order to reduce the risk of injury.
• Since there is a possibility of accumulation of electrostatic charges, it is necessary to carry out measurements in order to determine whether it is required to ground the tool or to use surfaces and/or compressed air systems which dissipate electric charges. Measurements and assembly of such systems must be carried out by properly qualified personnel.

SYMBOLS

OPERATION

Commencement of work

• Use an open-ended spanner to tighten the hose to the pump gun outlet in a safe and secure manner.
• Check the tightness of the compressed air supply system’s connections.
• Blow the air supply hose before it is connected to the system.
• Before operating the tool, make sure it has been cleaned and maintained properly.
• During operation and storage of the tool, the manometer must be protected from electric shock. In case the manometer has been shocked, it must be calibrated before operation of the tool.

Pumping

• Install the hose adapter on the valve of the object being pumped in such a manner so as to prevent leaks from appearing.
• Press the trigger of the gun and start pumping.
• Control the pressure value on the tool’s manometer. While the trigger is pressed, the pressure of the compressed air being pumped into the object will not be indicated. The pressure value will appear only once the trigger has been released.

DESCRIPTION OF MAIN PARTS

(FIG. 1)

1. Hose adapter
2. Hose
3. Air supply connection
4. Trigger
5. Manometer
6. Pressure reduction valve

SPECIFICATIONS

• Model BAT6170
• Maximum pressure 12 bar

1. The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the
   products. The parts described/illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included
   in the product you just acquired.

2. To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by
   technicians of the authorized service department of the manufacturer.

3. Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even serious injury or death. The manufacturer and the importer shall
   not be liable for injuries and damages resulting from the use of non- conforming equipment.

WARRANTY

The pneumatic tools have been manufactured according to strict standards, set by our company, which are aligned with the respec ve European quality standards. The pneuma c tools are provided with a warranty period of 24 months for non-professional use and 12 months for professional use. The warranty is valid from the date of purchase of the product. Proof of the warranty right is the purchase document of the tool (retail receipt or invoice). Under no circumstances shall the company cover the relevant cost of spare parts and respect ve required working hours unless a copy of the purchase document is presented. In case the repair has to be done by our service department the cost of transport on (to and from) is entirely borne by the sender (client). Τhe said tools must be sent for repair to the company or to an authorized workshop in the appropriate way and means of transport.

WARRANTY EXEMPTIONS AND RESTRICTIONS:

1. Spare parts that wear out naturally as a consequence of being used (expendable parts).

2. Tools damaged as a result of non-compliance with the instructions of the manufacturer.

3. Tools poorly maintained or taken care of.

4. Use of improper lubricants or accessories.
   Tools were given to thirds enes free of charge.

5. Damage as a result of connecting on of pressurized air with a pressure that differs from the one required according to the technical data label.

6. Damage as a result of unclean, unfiltered pressurized air use.

7. Damage or malfunction as a result of not cleaning the tool as required.

8. The tool has come in contact with chemicals, has been corroded or damaged by humidity.

9. Tools that have been modified or disassembled by unauthorized personnel.

10. Tools used for rent.

The warranty covers only the free-of-charge replacement of the component that presents a manufacturing defect or material failure. In case of lack of a specifi c spare part the company reserves the right to replace the pneuma c tool with another of the same kind. all warranty procedures have been concluded, the warranty period of the machine shall not be extended or renewed. Replacement of a spare part with repair charge is covered by a 1 year warranty of good opera, subject to compliance with the warranty terms. The spare parts or tools that are replaced remain in the possession of our company. Requirements, other than those men oned in this warranty form, regarding repairing a tool or damage thereof, do not apply. Greek law and relative regulations apply to this warranty.

WWW.NIKOLAOUTOOLS.GR

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>