BEGA 51179.4 Floor Lamp for Indoor Use Instruction Manual

BEGA 51179.4 Floor Lamp for Indoor Use

Product Information

• Product description: This product is an indoor floor lamp with an aluminium housing shield and a velvet black finish. It features light-diffusing synthetic disks with an optical texture.
• Dimmer: The floor lamp is equipped with a touch-controlled dimmer for infinite light adjustment.
• Thermal Regulation: The luminaire has temporary thermal regulation to protect temperature-sensitive components without switching off the light.
• Weight: The floor lamp weighs 4.7 kg.
• Energy Efficiency: The light sources in this product belong to energy efficiency class D.
• Safety: The installation and operation of this luminaire must comply with national safety regulations. The manufacturer does not accept liability for damage caused by improper use or installation.
• Overvoltage Protection: The electronic components in the luminaire are protected against overvoltage according to DIN EN 61547. Additional protection against transients is recommended through separate overvoltage protection components.
• Lamp Module Specifications:
  • Lamp Module connected wattage: 17.1 W
  • Luminaire connected wattage: 19.5 W
  • Rated temperature: 51 179.4 K3
  • Module designation: LED-1225/930 + LED-1224/930
  • Colour temperature: 3000 K
  • Colour rendering index (CRI): > 90
  • Module luminous flux: 2820 lm
  • Luminaire luminous flux: 1358 lm
  • Luminaire luminous efficiency: 69.6 lm / W

Product Usage Instructions

1. Carefully remove the floor lamp from its packaging and ensure it is in a firm and secure position.
2. Guide the housing shield provided over the luminaire’s light-diffusing synthetic lenses and into its end position.
3. Connect the luminaire to the mains supply (230 V).
4. Use the touch-controlled dimmer to adjust the light intensity to your desired level.
5. Avoid touching the light output opening of the LED directly during installation or relamping.

Floor lamp for indoor use

Instructions for use

Application
Floor lamp · indoor luminaire with metal housing and light-diffusing synthetic disks for shielded light, deflected upwards and downwards.

Product description

• Floor lamp »STUDIO LINE«
• Metal housing, finish Colour velvet black Aluminium housing shield,
• Finish Colour velvet black
• inside hue matt brass
• Light-diffusing synthetic disks with optical texture
• Touch-controlled dimmer for
• infinite light adjustment
• Black cable · 2 m, with safety plug
• LED power supply unit
• 220-240 V y 50-60 Hz
• BEGA Thermal Control®
• Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
• Safety class I
• c  – Conformity mark
• Weight: 4.7 kg
• This product contains light sources of energy efficiency class(es) D

Safety

The installation and operation of this luminaire are subject to national safety regulations.
The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.

Lamp

• Module connected wattage 17.1 W
• Luminaire connected wattage 19.5 W
• Rated temperature ta = 25 °C
• Ambient temperature ta max = 30 °C

51 179.4 K3

• Module designation
• LED-1225/930 + LED-1224/930
• Colour temperature 3000 K
• Colour rendering index CRI > 90
• Module luminous flux 2820 lm
• Luminaire luminous flux 1358 lm
• Luminaire luminous efficiency 69,6 lm / W

Installation

LED are high-quality electronic components!
Please avoid touching the light output opening of the LED directly during installation or relamping.
Carefully remove the floor lamp from its packaging and set it up. Make sure that the luminaire is in a firm and secure position

Guide the housing shield provided over the luminaire’s light-diffusing synthetic lenses and into its end position.
Connect luminaire to mains supply (230 V). The luminaire is equipped with a touch-controlled dimmer in the middle of the upper light-diffusing lens.
Press sensing device gently to turn the luminaire on or off.
Holding the sensing device enables to adjust the light intensity infinitely.

Cleaning · Maintenance

Clean luminaire regularly with solvent-free cleansers from dirt.
We recommend that you dry-clean the sensing device.

Replacing the LED module

• The designation of the LED module is noted on a label in the luminaire.
• The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools.
• Disconnect the system and open the luminaire. Please follow the installation instructions for the LED module.
• Defective luminaire cover must be replaced. Close the luminaire.

Spares

• LED power supply unit DEV-0402/520i
• LED module 3000 K down LED-1224/930
• LED module 3000 K top LED-1225/930
• Housing shield 71 003 492 B3

BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info@bega.com · www.bega.com

References

• BEGA · Das gute Licht.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>