Banggood JM05 Air Conduction Earbuds User Manual

Banggood JM05 Air Conduction Earbuds

List of items

Product introduction

Power on pairing

• Open the cover of the charging compartment and take out the headset.
• When the LED light flashes, the headset will enter automatic pairing mode.

Bluetooth pairing

Search Connections

• Open the charging compartment and take out the headset
• When the headset is turned on
• Mobile Bluetooth is turned on, and the device name is searched for JM05 for paring
• Paring succeeded
• The charging chamber automatially charges the headset, and the headset is tumed off

Note: the first time will not automatically connect, you need to open the phone Interface to manually search for the pairing name, take out the headset click JM05 for pairing connection

Operation

Binaural mode

• One touch: play/pause
• Incoming call: Click Answer, then Hang up
• Three clicks(R): volume increases
• Three clicks(L): volume decreases
• Double click (L): play the previous song
• Double click(R): play the next song
• Reject a call: long press for 25
• SIRI: long press 1.55
• Manual switch on/off long press 3s

Lug angle within 130 ‘ arbitrary adjustment 1—5

• Put Into the charging compartment need to dust the lue to the original angle 5

Headset wearing

1. Take out the headset
2. wear along the back of the ear
3. Rotate to a comfortable angle fixed position
4. Headphones ready

FCC STATEMENT

1. This device should be installed and operated with minimum distance 5mm between the radiator&your body.
2. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
3. This device may not cause harmful interference.
4. This device must accept any interference received, including interference that may cause undesired operation.
5. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
6. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed : provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is ne is a guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Product Parameters

Matters Needing Attention

• Long-time use of earphones may cause hearing damage, please arrange your time reasonably
• Do not use unqualfled chargers and high voltage current charging
• Do not throw to avoid product damage due to falling
• Do not disassemble, repair or modify this product by yourself
• Do not use chemical solvents to wipe this product

WARRANTY

Dear customer, hello

Thank you for patronizing our products. To ensure your interest, please read the instructions carefully after purchasing this product And the following: (The following situations are not covered by the warranty, and our company can provide paid services, please note)

1. Failure to operate, use, and store the product in accordance with the instructions may result in failure and damage to the product.
2. Unauthorized graffiti, tearing up product packaging and barcode.
3. Unauthorized modification of factory settings and disassembly for repair,
4. Accidental factors or man-made damage to the product, such as Input of unqualified voltage, high temperature, water ingress, or damage. The product is severely oxidized or rusted
5. Failures and damages caused by force majeure, such as earthquakes, fires, floods,

If you put in the charging compartment, the headset does not respond

1. Check whether the charging compartment has electricity,
   • If there is no electricity, you need to charge the charging compartment.
2. If the headset is not in the charging position, the headset is artificially bent,
   • If the headset is not in the charging position, the headset is artificially bent, so you need to break it manually to restore the original position and fit It with the charging thimble.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>