BEGA 12 127.1 Ceiling and Wall Luminaire for Indoor Use Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA 12 127.1 Ceiling and Wall Luminaire for Indoor Use
Product Information
Product Usage Instructions
Overvoltage Protection
Product Specifications
Module Information
DIMENSION
Instructions for use
Product Description
Installation
Cleaning · Maintenance
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 12 127.1 Ceiling and Wall Luminaire for Indoor Use

Product Information

Product Description: Luminaire made of Aluminium, finish Colour white Hand-blown crystal glass, white inside, with screw-neck Silicone gasket
Distance apart: 200 mm
2 cable entries for through-wiring for mains with plug connection
Earth conductor connection
2-pole connecting terminal for LED power supply unit 220-240 V x 0/50-60 Hz DC 176-276 V
DALI-controllable
Number of DALI addresses: 1
Basic insulation is provided between the mains
Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
Safety class I
Protection class IP 64
Dust-tight and protection against splash water
Impact strength IK06
Weight: 3.1 kg
This product contains light sources of energy efficiency class(es) D

Product Usage Instructions

The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage Protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547. To achieve additional protection against e.g. transients, etc., we recommend separate overvoltage protection components. You can find them on our website at www.bega.com.

Product Specifications

Lamp Module connected wattage: 13.8 W
Luminaire connected wattage: 16 W
Rated temperature
Ambient temperature

Module Information

Module designation: LED-0854/930
Color temperature: 3000 K
Color rendering index (CRI): > 90
Module luminous flux: 2255 lm
Luminaire luminous flux: 985 lm
Luminaire luminous efficiency: 61.6 lm / W

DIMENSION

Instructions for use

Application
Ceiling and wall luminaire · indoor luminaire made of aluminium and hand-blown crystal glass. For a variety of interior lighting applications.

Product Description

Luminaire made of Aluminium, finish Colour white
Hand-blown crystal glass, white inside, with screw-neck
Silicone gasket
2 mounting holes ø 5.5 mm
Distance apart 200 mm
2 cable entries for through-wiring for mains supply
cable up to ø 10.5 mm max. 5 G 1.5@
Connecting terminal 2.5@ with plug connection
Earth conductor connection
2-pole connecting terminal for digital control
BEGA Ultimate Driver®
LED power supply unit
220-240 V x 0/50-60 Hz
DC 176-276 V
DALI-controllable
Number of DALI addresses: 1
Basic insulation is provided between the mains
and control cables
BEGA Thermal Control®
Temporary thermal regulation to protect
temperature-sensitive components without
switching off the luminaire
Safety class I
Protection class IP 64
Dust-tight and protection against splash water
Impact strength IK06
Protection against mechanical
impacts < 1 joule
- r – Safety mark
- c – Conformity mark
Weight: 3.1 kg

This product contains light sources of energy efficiency class(es) D
Overvoltage protection
The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547. To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components. You can find them on our website at www.bega.com.
Safety
The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Lamp

Module connected wattage 13.8 W
Luminaire connected wattage 16 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 45 °C

12 127.1 K3

Module designation LED-0854/930
Color temperature 3000 K
Color rendering index CRI > 90
Module luminous flux 2255 lm
Luminaire luminous flux 985 lm
Luminaire luminous efficiency 61,6 lm / W

Installation

LED are high-quality electronic components! Please avoid touching the light output
openingof the LED directly during installation or relamping.
Remove glass from luminaire housing by turning it counter-clockwise.
Disassemble LED module.
Loosen LED-connection and earth connection (plug connection).
Lead the mains supply cable through the cable entry into the luminaire housing.
Fix luminaire housing with enclosed or any other suitable fixing material onto the mounting surface.
It is absolutely essential to use the enclosed gaskets.
Push silicone sleeves over the lines, make ground and electrical connection to the terminals.
For digital control please use the connecting terminal (DALI).
In case this connector is not used the luminaire will be operated at full light output.
Make earth connection between LED module and luminaire housing (plug connection).
Push plug into coupler as far as it will go.
Assemble LED module.
Screw glass with gasket firmly into the luminaire housing by turning it clock-wise.
Make sure that gasket is positioned correctly.

Cleaning · Maintenance

Clean luminaire regularly with solvent-free cleansers from dirt.
Replacing the LED module
The designation of the LED module is noted on a label in the luminaire. The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools. Disconnect the system and open the luminaire. Please follow the installation instructions for the LED module. Inspect and, if necessary, replace the luminaire gaskets. Defective glass must be replaced. Close the luminaire.

Spares