Huaptec 6 Feeder Cable Clamp User Guide
- June 1, 2024
- HUAPTEC
Table of Contents
Huaptec 6 Feeder Cable Clamp
Product Information
Specifications
- Material: 304 Stainless Steel + PP
- Parts: M8 hardware
- Mounting: 4-way
- Cables per hanger: 6
- Color: Black
- Dimensions:
- Height: 36 mm | 1.42 in
- Width: 60 mm | 2.36 in
- Length: 195 mm | 7.67 in
- Compatible cable OD, maximum: 16 mm | 0.63 in
- Compatible cable OD, minimum: 17 mm | 0.67 in
- Operation Temperature: -40°C to 85°C
- Suitable for cable type: 1/2 in
Product Usage Instructions
- Identify the installation location for the Feeder Cable Clamp.
- Ensure the surface is clean and suitable for mounting.
- Insert the cables into the clamp, ensuring they are properly seated.
- Secure the cables using the provided M8 hardware.
- Verify the cables are held securely and adjust if necessary.
- Check the environmental conditions to ensure they fall within the operating temperature range.
- For any issues or inquiries, refer to the provided contact information.
Frequently Asked Questions (FAQ)
Q: Can this Feeder Cable Clamp be used for cables other than 1/2 inch?
A: The Feeder Cable Clamp is specifically designed for 1/2-inch cables and may not be suitable for other sizes.
Q: Is the Feeder Cable Clamp suitable for indoor use?
A: The Feeder Cable Clamp is designed with robust materials for outdoor use and may not be ideal for indoor installations.
Q: What is the maximum number of cables that can be supported by this clamp?
A: The Feeder Cable Clamp can support up to 6 cables per hanger.
Key Features
- Easy and quick installation
- Robust design & material for outdoor use
- Operation Temperature -40~85 ℃
- Suitable for cable type 1/2 in
CHARACTERISTICS
General Specifications
- Material Parts 304+PP
- Mounting M8 hardware
- Cables per hanger 6
- Color Black
Dimensions
- Height 36 mm | 1.42 in
- Width 60 mm | 2.36 in
- Length 195 mm | 7.67 in
- Compatible cable OD, maximum 16 mm | 0.63 in
- Compatible cable OD, minimum 17 mm | 0.67 in
Environmental Specifications
- Salt spray test for metal parts ≥48 Hours, based on ISO 9227：2017
- Operating temperature -40°C ~ 85°C
- Note: The picture is only for reference, goods in kind prevail
- AAdd.: 5th FL, E BLDG, Sogood Science Park, Hangkong Road, Xixiang, Baoan, Shenzhen, China 518102
- E-mail:info@huaptec.com
- Web site:www.huaptec.com
References
Read User Manual Online (PDF format)
Loading......