Tensar EL8-475 High-Density Polyethylene GeoGrid Retaining Wall Reinforcement Installation Guide
- June 4, 2024
- Tensar
Table of Contents
Tensar EL8-475 High-Density Polyethylene GeoGrid Retaining Wall
Reinforcement Installation Guide
Install Checklist
- Prepare site in accordance with project specifications
- Gloves should be worn when handling and cutting 111 Lay geogrid flat and free from folds
- Cut geogrid to accommodate curves using sharp shears or utility knife
STEP 1
Prepare Site
STEP 2
Roll Out Geogrid
STEP 3
Repeat every 8 to 12 inches
STEP 4
Walls that last & no call backs!
Rolling Grid Parallel to Wall Face = Fewer Cuts = Faster Install
Please refer to retaining wall block unit manufacturer for wall construction
guidelines and instructions. Geo. rid use is at installer owner’s own risk.
Read User Manual Online (PDF format)
Loading......