inoi A83 Smartphone User Guide
- June 9, 2024
- inoi
Table of Contents
A83 Smartphone
User Guide
INOI A83 128+6GB
A83 Smartphone
Thank you for purchasing INOI smartphone. Before using this phone, you must
carefully read the manual. INOI smartphone is a mobile phone designed to work
in cellular networks. Model A181.
Security. Read the recommendations in this section carefully. Neglecting
these simple rules can lead to dangerous or illegal activities. A more
detailed description is given in the relevant sections of this manual. Do not
turn on the device where its use is prohibited or if the phone may become a
source of interference or danger. Do not use the phone while driving. The
phone is not waterproof. Avoid getting moisture on the device. Terms and
conditions of safe operation (use). The equipment is intended for use in
closed heated rooms at an ambient temperature of 0-35° C, and relative
humidity not exceeding 95%. The equipment does not need periodic maintenance
during the service life. Service life is 2 years. Terms and conditions of
installation. Installation of equipment is carried out in accordance with this
user manual. Terms and conditions of storage. The equipment should be stored
indoors, in its original packaging, at an ambient temperature of -20-45° C and
relative humidity not higher than 95%. Terms and conditions of carriage
(transportation). Transportation of equipment is allowed only in the factory
packaging, by any means of transport without distance limit. Terms and
conditions of sales. Without restrictions. Terms and conditions of disposal.
At the end of the equipment’s life, consult a specialist collection point for
equipment disposal. Terms and conditions of connecting to the electric network
and other technical equipment. Carried out in accordance with this user
manual. The equipment is intended for use in residential, commercial and
industrial areas without exposure to hazardous and harmful environment
factors. The equipment is designed for round-the-clock continuous operation
without the constant presence of maintenance personnel. Battery. Use only
original batteries, chargers, and accessories. Using other types of devices
may be dangerous and may invalidate the warranty on this device.
Specification. T606 Octa Core 12nm 1.6Ghz, Dual SIM, Android TM 12, 6.52″; HD+
IPS IN cell; 6GB RAM + 128GB ROM & MicroSD up to 256GB, Camera 48MP + 2 MP +
0.3 and Front Camera 13MP, WIFI 802.11b/g/n/ac, GPS, AGPS; MP3; BT; 4000mAh
Li-ion. Sales pack includes Smartphone, charger, USB Type-C cable, user manual
and warranty card. INOI Limited declares that this product is in compliance
with the basic requirements and other relevant provisions of Directive
2014/53/EU. A copy of the EU Declaration of Conformity can be found at
https://inoi.com/ce. Manufacturer or importer in the EU is specified on the
packaging. The use of the device is subject to the INOI Limited Privacy
Policy, which is available at https://inoi.com/privacy. Maximum signal level
GSM 850/900 33 dBm, GSM 1800/ 1900 32 dBm, UMTS 900/2100 23 dBm. Loss of
benefits, productivity, functionality, contracts, transactions, revenues or
anticipated savings, increased costs or expenses or for any other indirect,
consequential or special loss or damage. To the extent permitted by applicable
law, the Producer’s liability will be limited to the value of the Product on
the date of purchase. The restrictions contained in this item do not apply in
the event of gross negligence or willful misconduct of the Manufacturer and in
the event of bodily injury or death resulting from proven negligence of the
Manufacturer. For more information about the Product, visit
inoi.com This device is supplied for use in specific EU
countries — refer to the exact list on the box and not intended for use in
other EU countries. Attention! The manufacturer reserves the right to make
changes to the characteristics, appearance, packaging of goods unilaterally
without prior notice. The amount of available user memory depends on the
amount of preinstalled software. Detailed configuration instructions are
available in INOI application’s Support section or at
24.inoi.com. Manufacturer INOI Limited, Office 302,
Dominion Centre 43-59, Queen’s road, East Wan chai, Hong Kong
WARRANTY CARD
In case of problems, we strongly recommend contacting INOI service centers
directly. This will speed up service by an average of 14 days compared to
contacting the store where you bought the device. For current addresses, phone
numbers and opening hours of service centers, see
inoi.com/sc. In case of difficulties with servicing at
authorized service centers, please contact us
24@inoi.com.
IMEI————————-
Seller———————-
Tel———————–
Legal name——————
Address———————-
Warranty Terms. The consumer has the right to free repair at an
authorized service center if your product is diagnosed with constructive or
manufacturing defect within the warranty period. The warranty period depends
on the legislation of your country, but within the lifetime of the product;
The warranty period of the supplied battery charger is 12 months from date of
purchase, but within the lifetime of the product. The service life of the
product, including the supplied if any battery, charger, memory card, and
active auxiliary audio/media devices 24 months from the date of manufacturing
of the device. The warranty does not apply to cases, bags, holders, removable
panels, cables, self-installed software and other accessories. Warranty
service is done by an authorized service center only if the user has the
original warranty card filled with company-seller stamp and proof of purchase.
The warranty period for the product shall by extended for the period during
which the service center carries out warranty repairs of the product. Warranty
may become void in case of: damage caused by mechanical, electrical or thermal
effect, exposure to liquids or condensate; damage caused by improper use,
including operation in conjunction with non-original accessories; damage
caused as a result of unauthorized opening, repair, alteration or improper
installation of software; damage caused due to virus attacks, use of non-
licensed software; damage to the protective seals, belts, stickers, etc;
damage caused as a result of actions of third parties, force majeure, improper
storage and transport rules. Detailed terms at
inoi.com/lw
Operate Frequency Bands:
GSM 900: 880 MHz to 915 MHz
GSM1800: 1710 MHz to 1785 MHz
WCDMA Band I: 1922.4 MHz to 1977.6 MHz
WCDMA Band VIII: 882.4 MHz to 912.6 MHz
LTE Band 1: 1920 MHz to 1980 MHz
LTE Band 3: 1710 MHz to 1785 MHz
LTE Band 7: 2500 MHz to 2570 MHz
LTE Band 8: 880 MHz to 915 MHz
LTE Band 20: 832 MHz to 862 MHz
LTE Band 40: 2305 MHz to 2400MHz
WLAN 802.11b/g/n20: 2412 to 2472MHz
WLAN 802.11n40: 2422 to 2462MHz
WLAN 802.11a/n20/n40/ac20/ac40/ac80: 5150 to 5250 MHz
WLAN 802.11a/n20/n40/ac20/ac40/ac80: 5250 to 5350 MHz
WLAN 802.11a/n20/n40/ac20/ac40/ac80: 5725 to 5850 MHz
Bluetooth: 2402 MHz to 2480 MHz
Galileo: 1575.42 MHz
Max. output power:
GSM 900:33.78dBm
GSM1800:30.92dBm
WCDMA Band I:23.35dBm
WCDMA Band VIII:23.58dBm
LTE:
Band 1: 23.99 dBm
Band 3: 24.12 dBm
Band 7: 25.2 dBm
Band 8: 23.86 dBm
Band 20: 24.07 dBm
Band 40: 25.5 dBm
2.4G WLAN:18.35 dBm
5G WLAN: 18.00 dBm
5.8G WLAN:13.53 dBm
BT EDR: 5.31 dBm
BT BLE: 0.78 dBm
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rate (SAR) information:
This Smart phone meets the government’s requirements for exposure to radio
waves. The guidelines are based on standards that were developed by
independent scientific organizations through periodic and thorough evaluation
of scientific studies. The standards include a substantial safety margin
designed to assure the safety of all persons regardless of age or health.
FCC RF Exposure Information and Statement
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue.
Device types: smart phone ( FCC ID:2A9SN-A181) has also been tested
against this SAR limit. The highest SAR value reported under this standard
during product certification for use at the ear is 0.912W/kg and when
properly worn on the body is 1.102 W/kg. This device was tested for
typical body-worn operations with the back of the handset kept 10mm from the
body. To maintain compliance with FCC RF exposure requirements, use
accessories that maintain a 10mm separation distance between the user’s body
and the back of the handset. The use of belt clips, holsters and similar
accessories should not contain metallic components in its assembly. The use
of accessories that do not satisfy these requirements may not comply with FCC
RF exposure requirements, and should be avoided.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF
exposure requirements, a minimum separation distance of 10mm must be
maintained between the user’s body and the handset, including the antenna.
Third-party belt-clips, holsters, and similar accessories used by this device
should not contain any metallic components. Body-worn accessories that do not
meet these requirements may not comply with RF exposure requirements and
should be avoided. Use only the supplied or an approved antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>