BEGA 78 469.3 Wall Luminaire for Indoor Use Instruction Manual
- June 12, 2024
- BEGA
Table of Contents
78 469.3 Wall Luminaire for Indoor Use
Wall luminaire for indoor use
Instructions for use
Application
Wall luminaire · indoor luminaire made of handblown
opal glass, satin matt and metal housing,
for all lighting tasks in interior applications.
They are ideal for places where a soft and
uniform lighting distribution is required.
Luminaire with a high protection class.
Lamp
Luminaire with screw base E 14
Lamp output max. 2 × 40 W
This product contains light sources of energy
efficiency class E
Supplied lamp
2 × BEGA LED lamp 13552
LED Retrofit 4 W · 470 lm · 2700 K
Supplied lamp
2 × BEGA LED lamp 13594
LED Retrofit 4 W · 470 lm · 3000 K
Luminaire efficiency: 49%
Detailed technical and lighting data for the
lamps can be found in the data sheets on our
website.
Product description
Die-cast aluminium and aluminium housing,
finish Chrome
Hand-blown opal glass, satin matt
2 mounting holes ø 5.5 mm
Distance apart 330 x 56 mm
1 cable entry for mains supply cable
up to ø 10.5 mm max. 3 x 1.5@
Connection terminal 2.5@
Earth conductor connection
Lampholder E 14
Safety class I
Protection class IP 44
Protected against granular foreign bodies
≥ 1 mm and splash water
Impact strength IK03
Protection against mechanical
impacts < 0.35 joule
r – Safety mark
c – Conformity mark
Weight: 1.5 kg
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info@bega.com · www.bega.com
Safety
The installation and operation of this luminaire
are subject to national safety regulations.
Installation and commissioning may only be
carried out by a qualified electrician.
The manufacturer accepts no liability for
damage caused by improper use or installation.
If subsequent modifications are made to
the luminaire, the person responsible for
these modifications shall be considered the
manufacturer
Installation
Loosen screw of the lateral cover and take off
the glass from the luminaire housing.
Lead the mains supply cable into the luminaire
housing.
Fix the luminaire housing with enclosed or any
other suitable fixing material onto the mounting
surface.
It is imperative to use the enclosed gaskets.
Make earth conductor connection.
Push silicone sleeves over the lines and make
electrical connection to the terminals.
Insert lamp.
Position glass into the luminaire housing and fix
it with the screw and the cover.
Relamping · Maintenance
Disconnect the electrical installation.
Take off glass from luminaire housing.
Clean luminaire and glass.
Use only solvent-free cleansers.
Change the lamp.
Fix the glass.
Spares
Spare glass 11 002 798 .0R G
LED lamp 2700 K 13 552
LED lamp 3000 K 13 594
Lampholder 63 000 051
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info@bega.com · www.bega.com