VCOM M.2 NVMe SSD Enclosure User Manual

VCOM M.2 NVMe SSD Enclosure

Product Information

Specifications

• Product Name: External Hard Drive Enclosure
• Compatibility: Supports 2.5-inch and 3.5-inch SATA hard drives
• Interface: USB 3.0
• Transfer Speed: Up to 5Gbps
• Material: High-quality plastic
• Dimensions: 4.8 x 3.1 x 0.6 inches
• Weight: 3.5 ounces

Product Usage Instructions

Step 1: Inserting the Hard Drive

1. Ensure that the power of your computer and the enclosure is turned off.
2. Open the enclosure by sliding the cover or removing any screws.
3. Insert the SATA hard drive into the enclosure’s connector, making sure it is securely connected.
4. Close the enclosure by sliding the cover or reattaching any screws.

Step 2: Connecting to a Computer

1. Connect one end of the provided USB cable to the USB port on the enclosure.
2. Connect the other end of the USB cable to an available USB port on your computer.

Step 3: Powering On

1. Turn on your computer.
2. The enclosure will be automatically detected by your computer’s operating system.

Step 4: Data Transfer

1. Once the enclosure is detected, you can access and manage the files on the hard drive.
2. Copy, move, or delete files as needed.
3. Make sure to properly eject the enclosure from your computer before disconnecting it.

FAQ

Q: What should I do if the hard disk copy is suddenly interrupted?

If the file copy is suddenly interrupted, it is possible that the file may become corrupted. In such cases, you can skip the corrupted file and continue copying the rest of the files.

Q: Will extending the USB cable affect the transfer speed?

Yes, extending the USB cable may affect the transfer speed. It is recommended to use the provided USB cable or a high-quality USB extension cable to minimize any potential impact on the transfer speed.

Q: What precautions should I take when disassembling a hard drive?

When disassembling a hard drive, please perform the disassembly procedure on the computer first. Once the procedure is completed, you can safely remove the hard drive from the computer. Forcibly removing the enclosure or hard disk may result in data loss or damage to the hard disk.

10Gbps NVMe M.2 SSD ENCLOSURE

SPECIFICATION

• Product model: CU850N
• Main control chip: RTL9210
• Applicable agreement: NVME PCI-E
• Transmission speed: 10Gbps
• Hard disk interface: M Key,8 & M KEY 2280/2260/2242/2230
• Output interface: USB3.1Type-C
• Support capacity: 2TB
• Support system: Windows/ Mac/ Linux/ Android
• Product size: 10 2x28x12mm

HOW TO INSTALL

1. Press the open letters on both ends of the hard disk case and pul out the base of the hard disk case

2. Align the M.2 SSD with the card slot at the bottom of the hard disk box and insert it into the chassis.

3. Press down the buckle of the solid-state drive box to clamp the hard disk.

4. Replace the base of the hard disk box. The installation is complete.

Matters needing attention

The new SSD needs to enter disk management for initialization, otherwise the hard disk cartridge cannot read the hard disk.

1. Right-click this computer and slect Manage

2. Open Disk Management, the system will pop up a prompt to initialize the disk

3. Initialize the disk and select MBR(Master Boot Record), and finally click OK

4. Right-click the identified empty hard disk, select New Simple Volume, and start partitioning

Drive is Connected but Missing in File Explorer

Open Computer Management –> Storage Disk Management, then right-dick on the disk marked as Offline and select Online on the drop-down menu.

Matters needing attention

• Equipped with USB3.1 high performance chip, product input transmission speed 10Gbps,Jf connected to USB3.0 interface device, the device transmission rate will be affected.
• This product adopts standard USB 5V ± 5% power supply, and it will be damaged if it exceeds the standard voltage range, and cause product damage or potential safety hazard.
• When you need to remove the hard disk, please remove it safely on the computer before disconnecting from the computer. Do not forcibly remove the hard disk box and hard disk, so as to avoid data or disk error, damage or loss.
• Do not forcibly pull out the hard disk when copying data, so as to avoid file loss or hard disk damage.
• Please back up the hard disk data in advance before operating the hard disk partition or formatting, the company is not responsible for recovering the data in the hard disk, nor is it responsible for the loss caused by the loss of hard disk data.
• Do not drop, squeeze, impact or throw the product to avoid damaging the product.

Packing list

• 1 0Gbps NVMe M.2 SSD ENCLOSURE x1
• Hard disk fixed buckle x2
• Manual x1
• USS A TO C Cable x1
• USB C TO C Cable x1

OTHER NOTES

• When the hard disk copy is suddenly interrupted, the file may be corrupted. You can skip the file and continue copying.
• Extending the USB cable may affect the transfer speed.
• When disassembling a hard drive, please perform the disassembly procedure on the computer firstly, then remove the hard drive from the computer.
  Note: Forcibly removing the enclosure or hard disk may cause data loss or hard disk damage

FAQ

What M.2 NVMe SSD sizes are supported by the VCOM M.2 NVMe SSD Enclosure 3?

Typically, M.2 NVMe SSD enclosures support various M.2 form factors, such as 2230, 2242, 2260, and 2280. Check the product specifications to confirm supported sizes.

Is the enclosure compatible with USB Type-C or Type-A?

The VCOM M.2 NVMe SSD Enclosure 3 may support either USB Type-C, USB Type-A, or both. Confirm the connector type on the product or in the documentation.

Does the enclosure require an external power source?

Some M.2 NVMe SSD enclosures draw power directly from the USB connection, while others may require an external power source. Check the product specifications for power requirements.

What is the maximum read/write speed supported by this enclosure?

It depends on your device. If your device supports USB 3.1 Gen2 transfer speeds of up to 1 000MB/s.

How to do if the hard drive is not recognized?

Check whether the data cable and the hard disk are in good contact. Make sure the hard drive is formatted correctly. Not support large capacity hard disks (e.g. larger than 4TB) . Does the format of the hard disk match the format of the computer? If not, reconfigure your hard drive and choose the formats supported by your system (NTFS/exFAT on Windows, exFAT on Linux and MacOS).

ls it normal that the case heats up?

Due to the nature of SSDs and the high thermal conductivity of aluminum, the surface may become hot during use.

Why is it recognized in Apple's Mac OS system, but not in Windows?

Mac OS and Windows support different hard drive formats. If you want the hard disk to be common in Mac OS and Windows systems , it is recommended to format the hard disk data to EXFAT format after backup.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>