Vorago BSP-440 BOCINAS BT Speaker User Guide

September 15, 2024
Vorago

Vorago BSP-440 BOCINAS BT Speaker

KNOW YOUR DEVICE

  1. USB port
  2. 3.5mm auxiliary
  3. USB Type-C power supply
  4. Reset button
  5. Volume Button – / Previous
  6. Volume +/ Next Button
  7. GB lighting button
  8. Play/Pause Button
  9. Mode Button (BT/USB/FM)
  10.  TWS button
  11. Power On/Off Button

HOW TO USE

POWER ON/OFF

In the off state, long press the key (0) about 25 to switch on.

BLUETOOTH

  1. The speaker will enter Bluetooth mode automatically when turned on or you can select it from the Mode button (9).
  2. Activate Bluetooth of mobile phone and search for device name “BSP-440” then connect it.
  3. Play the music from your mobile phone and enjoy.
  4. Press and hold the +/- button (5, 6) for 2 seconds to change songs.
  5. Press the +/- button (5, 6) to increase/decrease the volume.
  6. Short-press (8) button to play/pause the music.
  7. Long-press TWS button (10) to disconnect the Bluetooth connection with the mobile device.

TWS FUNCTION

  1. Turn on two identical speakers you want to pair, both under BT mode. Only need to set one of the two units.
  2. Short-press the TWS (10) button to pair, the TWS button will keep lighting after paired successfully.
  3. Make Bluetooth connection with your mobile phone to play music by the two paired Speakers.
  4. Short-press the “TWS” button (10) again to exit TWS function.

USB PORT

  1. Press to the Power button (11).
  2. Insert USB flash disk into slot (1), the speaker will play the stored music automatically.
  3. Press +/- button (5, 6) to select songs, short press (5, 6) to adjust volume.
  4. Press to the button (8) to play or pause.
    Notes: Under any playing mode, when you insert a USB disk to the speaker, it will switch to play the USB disk.

FM RADIO

  1. Press the Mode button (9) until you enter FM radio.
  2. Short-press “Play/Pause” button (8) to mute the speaker. Long-press “Play/Pause” button to auto search the FM Channel and store it automatically.
  3. Long-press +/- button (5, 6) to change the stored FM channel, short-press to adjust the volume up and down.

AUX-IN

  1. For other compatible music devices, use the supplied audio line cable to connect from the device’s “Line Out” to the “Aux In” (2) of this device, then enjoy.
  2.  When you use the audio cable to connect the device, it will auto-switch to the AUx mode
  3. When using an external device, all functions can be controlled by the external device

RGB LIGHT
Short-press the RGB Light button (7) to turn the three different light modes and turn or off.

ACTIVATING VOICE ASSISTANT

  1. Make Bluetooth connection with your mobile phone.
  2. Long-press Play/Pause button (8) to activate voice assistant.

HANDS-FREE CALL

  1. Under Bluetooth connection status, if there is an incoming call, you can short-press Play/Pause button (8) to accept the call or to reject the call.
  2. Short-press Play/Pause button (8) or operate on mobile phone to end the call.

RESET FUNCTIONALITY
If the speaker does not turn off or respond, your can short-press the Reset Jack (4) with a small round pin to reset the speaker.

MORE REMARKS

  • Default volume is at 50% status of max volume.
  • Play time may vary depending on volume level and music style.

HOW TO CHARGE

  1. The charger is not included in the package, please charge this speaker via a standard 5V/1-3A charger or via a PC.
  2. Charge time should be 4-7 hours. Once the speaker is full charged, the 4 LED lights will keep steady lighting if it’s powered on, otherwise, the LED lights will be off.
  3. When battery voltage is low, the speaker will prompt for recharging.
  4. The unit does not have power bank function, it is forbidden to charge other device via this unit or to connect other device via the USB port.
  5. To protect the battery, please do not use the speaker while it is charging.

WARNING

  • Please store and use this product in an environment of normal temperature.
  • Please do not expose this product to rain or moisture environment.
  • Please do not disassemble, repair or modify this product by yourself without authorization.
  • When cleaning this product, please use a soft cloth or with little water if needed, please do not use chemicals for cleaning.
  • In order to have an extended product life and protect your hearing, please avoid listening to songs on maximum volume for long time.
  • The product is with built-in lithium battery, to avoid dangers, please do not discard or put it in the fair.

DATA SHEET

Vorago-BSP-440-BOCINAS-BT-Speaker- \(3\)

Limited product warranty
Vorago equipment and / or accessories are covered by a limited warranty for the time indicated in the annexed validity table, counting from the date of acquisition, against any manufacturing and operation defect, provided they have been used under normal conditions of use during the warranty period and for which it was manufactured. Vorago warranty the buyer the absence of anomalies regarding the materials.

Vorago-BSP-440-BOCINAS-BT-Speaker- \(4\)

Important warranty policy: Please read and complete this warranty policy and seal it in the store when purchasing the product.

Vorago-BSP-440-BOCINAS-BT-Speaker- \(1\)

Responsibilities
The total responsibility of Vorago will be to repair or replace the product, including labor and parts, at no cost to the buyer when it is returned to the point of sale, presenting this warranty policy properly completed and stamped by the establishment where it was purchased. The product or copy of the receipt or receipt or invoice, in which data of the product the date of purchase is specified, to verify the times within the warranty. Vorago may use new parts, restored or used in good condition to repair or replace any product, at no additional cost to the consumer. In the case of equipment and / or accessories that can not be repaired, the change will be generated by a similar product or with superior characteristics. This warranty covers the transportation expenses of the product derived from its fulfillment; which will be directly attributable to the supplier of the product. In all replacement products, the original warranty period will be renewed. Vorago is governed by international standards for the manufacture of products.

How to obtain warranty support
Warranty claims are processed through the point of sale, during the first 15 days after the purchase, as long as they meet the requirements. Guarantee claims that can not be processed through the point of sale and any concerns related to the product purchased should be sent with the prepaid guide by Vorago to the address of the Vorago headquarters in Francisco Villa No. 3, Col. San Agustín, CP 45645, Tlajomulco de Zúñiga, Jalisco, Mexico.

Except in situations of force majeure or fortuitous event, the repair time in no case will be greater than 30 calendar days from the date of receive of the equipment in Vorago.

Exclusions

This warranty is has valid in the following cases:

  • When the product had been used in conditions other than normal.
  • When the product has not been operated in accordance with the instructions for use.
  • When the product has been altered or repaired by unauthorized persons by Vorago.

To validate a warranty, the following information must be sent to the email: garantias@voragolive.com

  1. Model and color
  2. Product failure
  3. Ticket or purchase invoice (digitized)
  4. Your address with CP, telephone and full Name

Available in the establishment where the product was purchased and / or in our central offices:

Retre
case of product return, it will only be the place of purchase by the end customer. Subject to the return policies established by the same seller.

Vorago, S.A. de C.V. Francisco Villa No. 3 Col. San Agustín,
C.P. 45645 Tlajomulco de Zúñiga, Jalisco, México.
Tel. (33) 3044 6666
Importadora Global Rida S.A. de C.V. Matilde Márquez No. 68 Colonia de los Banos C.P. 15520 Alcaldía Venustiano Carranza, CDMX RFC: IGR1510164C2

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals