SONIC Oclean Smart Electric Toothbrush User Manual
- June 3, 2024
- Sonic
Table of Contents
Odeon Smart Sonic Electric Toothbrush
User Manual
Important Safety
Tips This product is recently mended for use by persons over 12 years of age.
The product can on y be used with Odean replacement heads. we will not be
responsible for any consequences resulting from the use of nun-certified
third-party ()rust t heads. This product is for personal cleaning only and is
not recommended for medical purposes. This product is for indoor use only. Do
not place the toothbrush under direct sunlight for a prolonged period of time.
It is recommended to be placed in dry well-ventilated areas with normal
temperature. Please keep the body dry before charging, dry it with a soft
cloth, and clean the charging base with a dry cloth regularly to prevent the
stain from building up.
Brush head
When replacing the brush head, please pull out or insert it vertically, and do
not rotate left or right It is recommended by dentists to change the brush
head every two to three months. Attention should be paid to those with the fo
Ilowi ng conditions of oral sensitivities and Those who have recently
undergone periodontal surgery or are undergoing treatments. Individuals with
other symptoms ms in the mouth including those with unstable dentures or have
persistent heavy bleeding from the gums. Other individuals with sensitive and
fragile oral issues. This product is not recommended for use with the above
group or consult a professional dentist before use. This product is not
suitable for people with disabilities, mental illness, or lack of relevant
experience and knowledge; including children (0-12 years old)]. Unless used
under the supervision of their guardians.
Instructions
First Power-on Use for the first time: Tap the On/Off button to turn on the
toothbrush and enable Bluetooth. The toothbrush will then remain in standby
mode; Bluetooth will also be in always-on mode. Installing App: After scanning
the QR code to download the Oclean Care/Oclean Care+/Oclean Pro App, please
search and connect your toothbrush in the App; Note: Attempt to connect the
toothbrush in “System Settings – Bluetooth Settings- in your phone will not
work.
Function settings: Scan the QR code to complete the App installation, which
will allow you to set various functions for your toothbrushes, such as turning
on/off the “change brushing area alert” function and etc. In addition, you can
also customize your own brushing plan and push the customized plan directly to
your toothbrush. Check the Brushing Records in the App The toothbrush mast he
paired with and conner.t to theApp in order to receive. the blushing data from
the brushings. As the toothbrush comes with limited memory size for data
storage and stores the brushing data for not more than 7 days, please sync the
brushing data with the App within 7 days.
Brushing plan: Without any settings, the toothbrush will run in the ‘Exclusive
Mode” by default, where a strong alert will be oven when the toothbrush runs
for 2 minutes and 3 minutes and wilt automatically stop running after 4
minutes of operation. Charging the toothbrush: Dry the toothbrush bottom
before charging, and then insert the USA charging cable into the charging port
on the base. After that, you can determine the battery level with the battery
percentage shown on the Oclean electric toothbrush display. After fully
charging, please remove the toothbrush from the charging base in time. After
brushing, please recharge it when the toothbrush alcstsyou its low battery
status.
Tooth brushing report
After the brushing is done, the product display will show your brushing time,
phishing scores, tips for additional phishing, mu-swaging medal interface and
integrated data report for the brushing you have just completed. Brushing Mode
Setup Users can select the brushing mode by swiping the display up and down or
on the edge of the main interface. After syncing toothbrush data with the
phone, users have an option to actively subject the toothbrush to the adaptive
brushing plan.
ChargingGuideline
Low Battery Alert When the battery percentage is below 596, an alert will pop
up on the display of your toothbrush from time to time to indicate that the
battery is running low. and you need to charge it soon. When the battery is
seriously low and the percentage is lower than 1%, your toothbrush will be off
and the toothbrush’s motor will vibrate to alert you to charge the battery,
and the screen will not be turned on either.
Take the charging base from the wall-mounted 2-in-1 holder, and connect it to
the charging cable. Put the toothbrush bottom on the charger to ensure that
the toothbrush is upright and clamped in the charging base. In normal
charging, the toothbrush will shoot, the charging sign and battery percentage
and be fully charged for about 2 hours. Important Charging Alert As the
electric toothbrush is provided with a fast charging mechanism, it is
recommended to connect and charge the toothbrush when required. Don t put the
toothbrush on the charger when charging is not required or it is fully
charged, because leaving the fully charged toothbrush in charging for a long
time may lead to premature depletion of the built-in battery, thus affecting
the user experience.
Recommended Tooth Brushing Method
| Move the toothbrush slowly at 45° angle between the bristles and a gum
line. There is no need to manually brush up and down during this process.
---|---
| Hold the toothbrush handle gently, move slowly in a circular motion, and
please do not apply excessive pressure.
| Please gargle with clean water after brushing.
Specifications
Product Name | Oclean Smart Sonic Electric Toothbrush |
---|---|
Model | Y2076 |
IP Rating | IPX7 |
Power of the toothbrush body | 1.8W |
Charger | Oclean USB Cradle (hanging and charging 2-in-1) |
Input | 5V —1A |
gallery Life* | 25 days |
Battery Capacity | 800 nnAh |
Charging Time | About 2 hours |
Standard | GB 39669-2020 |
Bluetooth | Bluetooth 4.2 above |
” Using default mode, it is calculated at 2 minutes/time, 2 times/day working condition.
- Do NOT disassemble, strike, extrude or throw the device into a fire.
- Do NO I use the toothbrush if its battery is bulging or has expanded?
- Do NOT place in a high-temperature environment
- Do NOT use the device if its battery has been subjected to immersion in water.
FCC Statement
This device complies with part IS of the FCC Rules. Operation is subject to
the following two conditions: (I) this device may not cause harmful
interference, and 12) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class U digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help. The
device has been evaluated to meet the general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
FCC ID: 2AN5D-Y2076
IC Caution
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
IC: 24982-Y2076
CAN ICES-3(B)/NMB-3(B)
EU REP
EU Authorized Representative Agency name: Mbrush IJAB Representative: Algirdas
Tevelis
European Address: Tatoriqg.3, Kaunas, Lithuania Post Code: LT44237
Email: service@mobalt.eu
Phone: +37067052772
Facebook Page Made in China
Guarantee Certificate of Oclean Smart Sonic Electric Toothbrush
User Information ——————————
Name: ——————————
Phone: ————————————
E-mail: ———————————-
ZIcode ————————————————–
Address——————————
Retailer Information
Retailer: ———————————————–
Phone: ———————————————
Adc E SS:———————–
Sales dale: ———————————
ZIP’ -ode:——————————————————
Invoice no.: ——————————————————–
Product Information
Product. type: ———————————————————
Manufacturing site.———————————————————————
Warranty Card of Oclean Smart Sonic Electric Toothbrush
Delivery date| Fault description/reason/disposal| Equipment employed|
Acceptance date| Serviceman
---|---|---|---|---
| | | |
| | | |
Please request a maintenance report from the maintenance center and keep it
together with the warranty certificate.(See the page on the left.)
Shenzhen Yunding Information Technology Co., Ltd., in strict accordance with
the Responsibility Regulations on Maintenance, Replacement, and Sales Return
of Household Appliances, offers a guarantee for consumers who purchase the
Oclean Smart Sonic Electric Toothbrush. In the case of any inconsistency
between the service articles and the provisions of the guarantee, the
provisions of the guarantee arid the contents of the guarantee certificate
shall govern. If the product you have purchased is found to have a fault or
defect, please contact our service line at 11008-365-909.
Manufacturer: Shenzhen Yunding Information Technology Co., Ltd.
Manufacturer’s address: 28G, Building 3, Datong Business Center (phase III),
No.13 Dachong 1st Road, Dachong Community,
Yuehai Street, Nanshan District, Shenzhen, Guangdong, China.
Production address: I Jo.89, Dingshan Middle Road, Dongfu Street, Ha can g
District, Xiamen, Fujian, China
Website: www.oclean.com
Name of parts| Toxic and harmful substances or element| Environment.
Prolcclion
---|---|---
Pb| Hg| Cc1| Cr6+| PBBs| PBDEs| 4 Phthalates
PCBA| | T)| | C| C| 0| 0| 10 years
Plastic parts| | C| | C| C| 0| 0
Metal hardware| 0| 0| 0| C| C| C)| 0| 5 years
Name of parts| Toxic and harmful substances or element| Environment
Protection
Pb| Hg| Cd| Cr6+| PBBs| PBDEs| 4 Phlhalalcs
Vibrating motor| 0| 0| 0| C| c| 0| 0| 10 years
Accessories| C)| C)| 0| C| C| 0| 0
Battery| 0| 0| 0| —| —| —| —| 5 years
Remarks O These cases that consent of hazardous in all homogeneous
2.0 Directive: 2311/65/EU & (E.,) 2015/863.
X This incl•ca7es: hat the content of toxic and hazardous..instances in
at least one of the homogeneous materials of this compor ent is 1TIOre than
the (*Mite(‘ qt. entity as specified •n Ro HS 2.0 Di tetiv c: 2011/65/EU &
(EU,’ 2015/S63.
— Refer to Battery Directive: 20CC / 66 / EC and amendment 2013 / 5C / EU
***** Except for very few materials, due To technical development reasons,
most. of I.he materials used are environmentally friendly. Please …Ise this
product with confidence during g the environmental protection period.
www.facebook.com/oleunofficial
Follow the
0clean Official Facebook Page
Download App
www.oclean.com/download