Garosa PG-L58 Air Quality Monitor Indoor Instruction Manual

Garosa PG-L58 Air Quality Monitor Indoor

Air Quality Detector Operating Instructions

Product Description

When opening the package, please confirm whether the air quality detector is in good condition and the accessories are complete; This product comes with a battery, please charge it for 5 minutes before using it for the first time, and then press and hold the multi-function button to turn it on; Avoid running out of battery due to long time transportation and other reasons; Please calibrate the product before use.

• 1 x Air Quality Detector
• 1 x Instruction Manual
• 1 x Type-C Cable

Calibration Method

1. Manual calibration
   Turn on the device, place it in an environment with CO, concentration of about 400PMM (outdoor or by a ventilated window) for 5~10 minutes, and press the multi-button 3 times in quick succession until the device gives a beep sound to complete the manual calibration.

2. Automatic calibration
   After 24 hours of power on, the sensor will set the lowest CO, value within 24 hours as zero value, so please ensure that there are some ventilation time within 24 hours.

Operating Instructions

1. Power on: In the power off state, press and hold the multi-function button for 2 seconds, The buzzer sounds “beep”, and then displays the current parameters on the screen.
2. Charge: When the device is charged in the powered-off state, the device is already charging after the power cable is connected. Although there is no indicator on the screen, please don’t worry, it has been charged. When the device is charged in the power-on state, the battery icon in the right corner will flash, and it will stop flashing when it is full.
3. Power off : In the power on state, long press the multi-function button to power off.
4. Switch the temperature unit: In the power-on state, short press the multi-function button once to switch between degrees (0() and Fahrenheit {°F).

Note: Do not hold the product close to your face, as your breath will affect the detector’s CO2 detection concentra tion.

CO2 Concentration Grade Description
The product is able to measure the concentration of carbon dioxide in the air and to show it in the form of a numerical and graphic value; When the co, co- concentration value reaches or exceeds 1500 PPM, the product will sound an alarm.

Product Parameters

Health reference value

Cautions
Please read the following instructions carefully before using the product for the first time.

1. Since the product uses high-precision sensors and components, please keep the product in a dry environment without direct sunlight.
2. When the user purchases and uses this product for the first time, please place it in a ventilated environment to manually calibrate it manually or turn it on and wait for 24 hours for automatic calibration.
3. Do not block the air inlet when in use.
4. The product is not waterproof, do not immerse or splash water or other liquids on it.
5. Do not insert sharp, flammable, or metal objects into the air inlet of the monitor, otherwise, it may cause electric shock and burn.
6. Please use the power adapter for the power supply when the product is used for a long time. The battery is only suitable for temporary use.
7. Beware of the product being dropped or severely impacted, which may cause the product to fail to work properly.
8. The detection of this product is qualitative rather than quantitative, there will be some deviation in the measurement value. Please refer to the accuracy range for details.

Disclaimer

1. This manual describes the use method and technical parameters of the product as fully as possible, but the company reserves the right to modify this manual without further notice;
2. The appearance of the product in the manual may be slightly different from the actual product due to printing and other reasons, please refer to the actual product;
3. This information is for reference only and does not constitute any form of commitment;

waste Electrical and Electronic Equipment (WEEE) Directive
This label indicates that this product should not be disposed of with household waste.It should be deposited at an appropriate facility to enable recovery and recycling.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>