Dongguan City Dongle Technology DL106 Keyboard Case for iPad with Bluetooth User Manual

Dongguan City Dongle Technology DL106 Keyboard Case for iPad with

Bluetooth

Bluetooth keyboard connection method

Turn on the power switch on the right side of the keyboard to on, press and hold the bu on for 4-5 seconds, At this me, the Bluetooth indicator ashes, which means that the keyboard enters the pairing state. Turn on the Bluetooth of the table and scan it, The table scans Bluetooth Keyboard. Click Connect to show that the connection on has been successful. The keyboard indicator is o . The keyboard has the function of automatic sleep and automatic return connect on. Aer a successful connection, the keyboard is turned o and disconnected. You need to connect again. You only need to turn the keyboard on and o and push it to on, and then the tablet Bluetooth will connect automatically when it is turned on. You don’t need to press or click the paired Bluetooth to connect automatically.

How to switch devices?

First preset the channel, and then connect to Bluetooth ( Fn + A is channel 1, Fn + S is channel 2, Fn + D is channel 3). The opera on method is as follows: For the rst me on the keyboard, press the key, an er 4-5 seconds, the Bluetooth device is successfully connected, This device is considered as channel 1 by default. If you need to connect to the second device, you need to press Fn + S rst, then press, area 4-5 seconds, the Bluetooth light ashes, start to connect the second device, this device is channel 2; If you need to connect the third device, you need to press Fn + D rst, then press , a er 4-5 seconds, the Bluetooth light ashes, start connect ng the third device, this device is channel 3; When the three channels are successfully connected, press Fn + A, S or D to switch between the three devices(Channel switching wait for me is 5-6 seconds). If the keyboard Bluetooth has been connected to 3 devices, at this me, if you want to change the device of channel 3 to channel 1, you only need to press Fn + A (channel 1) first, then press, area 4-5 seconds, the Bluetooth light ashes, Start connecting the device, the original channel 3 device becomes channel 1 (the original channel 1 device, at this me, the Bluetooth has been disconnected, if you need to connect, you need to reset the channel, and then connect to the Bluetooth).

Backlight adjustment steps

Turn on the power and successfully connect to the device. Click to swith to backlight mode, and click once for the light ng e cet to turn on the rainbow light backlit. Light brightness adjustment: Use the key to adjust the three brightness of the light, Click 3 times in sequence, which is divided into three modes: weak, medium and strong, and click the four me to trun o the backlight. Light colors switch: Click the bu on to switch the rainbow light backlit color, a total of seven colors of rainbow light backlit, single click to switch one color. The breathing e ect switch: Use the combine on key Fn + to switch to the breathing e ect (automatically switch colors), Use the combine on key Fn + again to turn o the breathing e ect.

How to use Smart Voice Shortcuts

Press twice in a row to enter the input voice mode and start the voice; when you end the voice, just press once.

FCC

This device complies with part 15 of the FCC Rules. Opera on is subject to the following two conditions: (1) This device may not cause harmful interference. (2) this device must accept any interference received, including interference that may cause undesired opera on. Any Changes or medications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a par cular installation. If this equipment does cause harmful interference to radio or television Recep on, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separa on between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help

SPECIFICATION

• Size: 287 228 7 mm
• Bluetooth version: 5.1
• Operating distance: within 10 meters
• Charging voltage: s 6.5V
• Working voltage: 3-4.2V
• Working curent: s 2.8mA
• Standby current: s 0.5mA
• Sleep current: s 0.1mA
• Lithium battery capacity: 500mA
• Continuous working time : about 6hturn on backlight) 160h(turn off backlight)
• Standby working time : about 90days
• Keypress force: 70:10g
• Key life: 8 million clicks
• Working temperature: -50°F-131°

Note:

1.  If you do not use the keyboard for a long me, we suggest that you turn the keyboard to extend the ba ery life.
2.  In order to get a longer ba ery life, it is recommended to charge the keyboard when the power light is ashing, and it is best to control the charging meeach me, About three hours. Energy saving sleep mode: When the keyboard has no opera on for 10 minutes, it will enter the sleep mode. When it needs to be used,just press any key and wait for 5 seconds, the keyboard will go into sleep mode start-up.

Troubleshoot

1.  Make sure the power is on.
2. Make sure the keyboard is within the opera ng distance.
3.  Make sure the ba ery is charged.
4.  Make sure your tablet’s Bluetooth are on.
5.  Make sure the wireless keyboard is on and Bluetooth is on.
6.  Make sure the wireless keyboard and at Bluetooth are paired.

Charge

The ba ery is low and the power indicator is ashing, which indicates that the keyboard needs to be charged

1.  Connect the B end of USB cable to the keyboard end.
2.  Connect the A end of USB to the power adapter or the USB interface of the computer.

How to use Keyboard shortcut

Touch control board opera ng instructions

Keyboard indicators

Remarks:

1. Check Bluetooth compatibilities before connecting your devices
2. When the keyboard is not used for a long period of time, turn it off to preserve battery Ifie.
3.  Only charge the keyboard when the low voltage light is flashing to maximize battery life.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>