BEGA 50650 LED Ceiling and Wall Luminaire for Indoor Use Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA 50650 LED Ceiling and Wall Luminaire for Indoor Use
Product Information
Product Usage Instructions
OVERVIEW
Instructions for use
Product Description
Overvoltage protection
Installation
Replacement of the LED module Maintenance
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 50650 LED Ceiling and Wall Luminaire for Indoor Use

Product Information

The product is a luminaire that requires installation and operation in accordance with national safety regulations. Only qualified electricians should carry out the installation and commissioning. The manufacturer is not liable for any damage caused by improper use or installation. Any modifications made to the luminaire should be done by the person responsible for the modifications. The electronic components in the luminaire are protected against overvoltage according to DIN EN 61547. For additional protection against transients, it is recommended to use separate overvoltage protection components, which can be found on the manufacturer’s website at www.bega.com.

The product has different module designations based on color temperature:

Module Designation: 4x LED-0280/927
Color Temperature: 2700 K
Color Rendering Index (CRI): > 90
Module Luminous Flux: 2600 lm
Luminaire Luminous Flux: 1744 lm
Luminaire Luminous Efficiency: 90.8 lm/W
Module Designation: 4x LED-0280/930
Color Temperature: 3000 K
Color Rendering Index (CRI): > 90
Module Luminous Flux: 2640 lm
Luminaire Luminous Flux: 1770 lm
Luminaire Luminous Efficiency: 92.2 lm/W

The product also provides spare parts including spare glass, LED power supply unit, LED module 2700 K, and LED module 3000 K. Refer to the user manual for further details and safety instructions.

Product Usage Instructions

Ensure that the luminaire is installed and commissioned by a qualified electrician in accordance with national safety regulations.
If modifications are required, they should be carried out by the person responsible for the modifications.
For additional protection against transients, consider using separate overvoltage protection components available on the manufacturer’s website.
The product has different module designations based on color temperature. Choose the appropriate module designation based on your preference:
- Module Designation: 4x LED-0280/927 – Color Temperature: 2700 K
- Module Designation: 4x LED-0280/930 – Color Temperature: 3000 K
Refer to the user manual for specific installation instructions for the chosen module designation.
Ensure that the luminaire is operated within the specified temperature range to prevent any damage.
Refer to the user manual for maintenance instructions and information on spare parts.

OVERVIEW

BEGA-50650-LED-Ceiling-and-Wall-Luminaire-for-Indoor-Use-
FIG-1

Instructions for use

Application
Ceiling and wall luminaire · indoor luminaire made of hand-blown opal glass, satin matt, and aluminum alloy housing, for all lighting tasks. They are ideal for places where a soft and uniform lighting distribution is required. Luminaire with a high protection class.

Product Description

Luminaire made of aluminum alloy
Finish Colour white
Hand-blown opal glass, satin matt, with sliding-bolt closure 2 mounting holes ø 6mm
Distance apart 208mm
2 cable entries for through-wiring for mains cable up to ø 10.5 mm max. 3 × 1.5@
Connection terminal 2.5@
Earth conductor connection
LED power supply unit
220-240 V x 0/50-60 Hz
DC 170-276 V
BEGA Thermal Switch®
Temporary thermal shutdown to protect temperature-sensitive components
Safety class I
Protection class IP 44
Protected against granular foreign bodies ≥ 1 mm and splash water
Impact strength IK06
Protection against mechanical impacts < 1 joule
- r – Safety mark
- c – Conformity mark
Weight: 2.8 kg

This product contains light sources of energy efficiency class(es) D

Safety
The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547. To achieve additional protection against e. g. transients, etc. we recommend separate overvoltage protection components. You can find them on our website at www.bega.com.

Lamp

Module connected wattage 16.8 W
Luminaire connected wattage 19.2 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 40 °C

50 650 K27

Module designation 4x LED-0280/927
Color temperature 2700 K
Color rendering index CRI > 90
Module luminous flux 2600 lm
Luminaire luminous flux 1744 lm
Luminaire luminous efficiency 90,8 lm / W

50 650 K3

Module designation 4x LED-0280/930
Color temperature 3000 K
Color rendering index CRI > 90
Module luminous flux 2640 lm
Luminaire luminous flux 1770 lm
Luminaire luminous efficiency 92,2 lm / W

Installation

LED are high-quality electronic components!
Please avoid touching the light output opening of the LED directly during installation or relamping.
Lead mains supply cable through the cable entry into the luminaire housing.
Fix the luminaire housing with enclosed or any other suitable fixing material onto the mounting surface.
It is imperative to use the enclosed gaskets.
Make an earth conductor connection.
Push silicone sleeves over the lines and make an electrical connection.
Insert the opal glass into the luminaire housing with sliding bolt glass closure and turn the glass clockwise up to the stop.
Place glass in the luminaire housing and observe that the holding spring bolts fit into the notches of the glass.
Turn the glass clockwise until it is locked.
Thus, you reach a safe and vibration-resistant holding of the glass.
To release the glass from the luminaire housing, turn it counterclockwise.

Replacement of the LED module Maintenance

The designation of the LED module is noted on a label in the luminaire.
The light color and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools.
Disconnect the system.
Unscrew the glass from the luminaire housing by turning it counterclockwise.
Clean glass and luminaire regularly with solvent-free cleansers from dirt.
Please follow the installation instructions for the LED module.
Screw in the glass by turning it clockwise as far as it will go.
A broken glass must be replaced.

Spares