In Common With Helena Floor Lamp Instruction Manual
- June 12, 2024
- In Common With
Table of Contents
In Common With Helena Floor Lamp
How to Install Your New Light
Please check that you received all of the components pictured in this guide.
Reach out to us if anything is missing. It’s very rare, but it happens. Don’t
forget to turn off the electrical power source.
You won’t need any additional tools.
CAUTION
As a safety feature, this lamp has a polarized plug to reduce the risk of
electric shock. This means it has two flat prongs and a third circular prong
underneath, and it will fit in an outlet one way only. If the plug does not
fit fully and easily into the outlet, do not force it; contact a qualified
electrician.
Contents
InstallationInstruction
Step 1: Feed the cord from the shade (E) through the floor lamp base (F) Align
the shade with the base connector.
Step 2: Insert set screws (C) using the hex key provided (D).
Step 3: Gently screw in the included lightbulbs (B) into the fixture sockets
of the lamp shade.
Step 4: Carefully tilt the table lamp to it’s side. Connect the wire from the
shade to the power cord. Twist to secure. Once connected, gently tilt the lamp
and slide the quick connect under the base of the lamp.
Step 5: Plug-in the floor lamp and turn on the light.
Step 6: Spin the finial on the top of the Helena table shade (E) to turn on
the fixture and control brightness.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>