essentiel b Final IM Portable Screen User Guide

essentiel b Final IM Portable Screen User Guide

Instructions for use

Read these instructions carefully before using the device and keep them in a safe place for future reference.

WARNING
RISK OF ELECTRIC SHOCK I DO NOT OPEN

WARNING: DO NOT DISASSEMBLE OR TRY TO OPEN YOUR APPLIANCE AS DOING SO AND REMOVING THE CASE COULD EXPOSE YOU TO DANGEROUS VOLTAGES AND OTHER HAZARDS.

**** A lightning symbol inside an equilateral triangle warns users about the presence of uninsulated high voltages inside the device with a sufficiently high current to present an electrical discharge risk to individuals.

An exclamation mark inside an equilateral triangle informs users of important operational or maintenance safety instructions (routine maintenance) in the instructions for use provided with the appliance.

Read these instructions carefully before using the device and keep them in a safe place for future reference.

USERS SHOULD NOT ATTEMPT TO REPLACE ANY PART OF THIS DEVICE. ALL REPAIRS SHOULD BE CARRIED OUT BY AN AUTHORISED REPAIR SERVICE

Use

• This appliance is intended for domestic use only and is not for commercial or industrial use. Only use the appliance as specified in these instructions for use.
• This device must not be used by children unless supervised. Make sure children do not play with the device.

Power source

• The USB-C power cord is the only way to completely disconnect the device from the mains supply. To be certain that the device is no longer powered, this cord must be unplugged from the computer.
• Make sure the USB-C power cord cannot be crushed or trapped, especially around plugs and where it is connected to the device.
• Make sure that the USB-C power cord is positioned so that it cannot be walked on or tripped over.
• When unplugging the power cord, alwayS pull it out at the plug; do not pull on the cord itself.
• Do not use the device or handle the USB-C power cord with wet hands.
• Never immerse the USB-C cable or the device in water or other liquids.

Installation

• Install the appliance on a flat and stable surface that is large enough to hold it securely.
• Do not install your PC monitor on top of another electrical device.
• This appliance must be used in a temperate climate and must only be used indoors.

Humidity and water

• Do not expose this device to rain or moisture to avoid any risk of fire or electrical shock.
• Avoid splashing liquid on the appliance and do not place items containing liquid (such as a vase) on or near the appliance.
• Do not use this appliance in a humid or damp environment (do not use in bathrooms, or near sinks or washing machines).
• If any liquid or object enters the monitor, unplug it from the USB-C cable and do not use it again until it has been checked by the service department.

Heat sources

• Do not install this device near sources of heat such as nachators, stoves or other devices (including amplifiers) that produce heat.
• Do not place anything that produces a naked flame, such as lighted candles. on or near the device.
• Do not expose the appliance to direct sunlight. dust or NobratiOnS.

Ventilation and intrusion of objects

• The appliance’s slots and openings serve as ventilation and ensure reliable operation.
• Do not obstruct any of the ventilation ducts by covering the ventilation opening with items such as newspapers. a tablecloth. curtains. etc.
• Do not set the appliance on a bed. divan or other similar surface as the ventilation ducts could be obstructed.
• Be sure to leave a space of at least 10 cm wound the appliance to ensure good ventilation.
• Make sure no object falls on and no liquid spills inside the appliance through the slots or openings. The appliance has a high voltage and inserting an object could lead to electric shocks and/or a short circuit in the Internal pans.

Lightning

• Unplug the device from the mains socket during storms or if it is not used for an extended period.

Cleaning

• Before cleaning, unplug the monitor from the computer.
• Only use a clean, dry cloth.
• Do not use aerosols.

Technical assistance

• Any maintenance should be carried out by qualified personnel. Maintenance is required when the appliance has been damaged in any of the following ways:
• liquids or objects have been inserted into the appliance
• exposure to rain or damp conditions
• the appliance is malfunctioning or has been dropped.
• The user may not perform any repairs. Consult your retailer’s service desk for any maintenance requests.

Spare parts

• When parts have to be replaced, ensure that the technician has used the spare parts specified by your retailer or parts that have the same characteristics or same performance as the original pads.
• Unauthorised replacements can lead to fire, electric shock or other damage.

Disposal instructions

• The packaging and the parts comprising it are recyclable and must be recycled. Packaging materials must be kept out of the reach of children.
• The LCD screen is a state-of-the-art product that contains approximately 3 million transistors, which provides a great quality image. Occasionally. a few blue, green or red dots (inactive pixels) may appear on the screen. This does not affect the performance of your product.
• Do not touch the screen with you- fingers or other objects as this could damage it.

your product

Contents of the box

• 1 15.6″ screen
• 1 USB-C to USB-C power cord to power and display
• 1 carrying bag • 1 energy label
• 1 user guide

Technical features

This symbol means that the product is a class Ill equipment. This class Ill product must be supplied by a transformer operating at safety extra-low voltage.

Installing the moniter

Your monitor has a rotatable (0 to 360°) and tiltable (0 to 180°) stand.
Tilt your monitor to the angle that offers optimal viewing conditions. connecting the screen

Connecting the screen

• Plug in the end of the USB-C cable supplied to one of the two USB-C ports on the monitor.
• Plug the other end into a free USB-C port on your source (PC / smartphone).
• The screen comes on.
• To power the monitor and save your PC/ Smartphone battery, you can also use a USB Type-C adapter (not supplied).
• Please prioritise use of the cable provided to ensure the proper functioning of your monitor.

**Control button

**

1| |

• Display the main menu (short press on the homescreen)
• Confirm an option on the main menu and access the related sub-menu
• Turn the monitor on or off (3-second press)

---|---|---
2| |

• Adjust the volume (short press on the homescreen)
• Navigate the main menu

3| |

• Adjust the image mode (short press on the homescreen) Standard, Cinema, RTS, FPS, EyeCare·
• Return to previous menu
• Quit main menu

Note:

• The button 1 does not disconnect the device from the mains supply. If you want to disconnect the monitor from the mains supply, disconnect the USB-C cable.

navigating the menus

1. Press on the button 1 to open the OSD menu.
2. Press on the button 2 to move around between the various Menu options. When you move from one icon to another, the option name is highlighted.
3. To select the item highlighted in the menu, press on the button 1 again.
4. Press on the button 2 to select the desired setting. Press on the button 1 to display the settings bar and then use the buttons 2 or 3 to make changes according to the menu indicators.
5. Press on the button 1 to confirm and return to the previous screen.
6. Press several times on the button 3 to exit the menu.

• Brightness

|

• Adjust image brightness

• Contrast

|

• Adjust image contrast

Colour
temperature|

• Warm

|

• Apply a pre-set warm colour

• Cold

|

• Apply a pre-set cold colour

• User

|

• Personalise image colour

Input|

• HDMI

|

• Select the micro HDMI playback source 7

• Type-C1

|

• Select the USB-C1 playback source 5

• Type-C2

|

• Select the USB-C2 playback source 6

• Automatic
  selection

|

• Enable the automatic selection of playback source according to the type of connectors fitted to the monitor

Functions|

• Language

|

• Select the menu language

---|---|---

• Overdrive

|

• Enable or disable Overdrive

• HDR

|

• Enabling and disabling the HDR function

• Turn off

|

• Enabling and disabling automatic monitor standby mode

·    Reset|

• Restoring factory settings

Troubleshooting guide

Before contacting the service department, please carry out the checks listed below. If you cannot solve the problem by following the instructions below, contact your local retailer or a qualified technician.

No image displays on the screen| Press and hold the button 1 for 3 seconds in order to check whether the monitor turns on.
---|---
Check that the power supply indicator on the button  1 is fully on.
Check that the USB-C cable is correctly connected to the monitor and to your PC.
The images displaying on the monitor are too light or too dark| Adjust screen brightness with the button 3  .
The image is not centrered on the screen or is not the correct size| Check that the USB-C cable is correctly connected to the monitor and to your PC.
Move electrical appliances likely to cause interference apart.
Flickering| Inspect the USB-C cable and make sure that none of the pins are bent.

Defective pixels

The liquid crystal screen (LCD) is a high-tech product that contains about a million transistors offering a high quality image. Occasionally, a few blue, green, red dots (corresponding to inactive sub-pixels) may appear on the screen. This does not affect the performance of your product.

• European Standard EN 9241-307 class II Due to the very large number of transistors and the extremely complex manufacturing processes associated with them, losses or problems with the addressing of individual pixels or sub-pixels can occur in places.
  Standard EN 9241-307 provides a definition of the characteristics relating to pixel errors. These are listed in four classes and three types of errors. Each pixel in turn breaks down into three sub-pixels corresponding to the basic colours (red, green, blue).

• Pixel composition

All information, designs, drawings and pictures in this document are the property of SOURCING & CREATION. SOURCING & CREATION reserves all rights to its brands, designs and information. Any copy and  reproduction through any means shall be deemed and considered as counterfeiting.

Protection of the environment

This symbol attached to the product means that it is an appliance whose disposal is subject to the directive on waste from electrical and electronic equipment (WEEE). This appliance may not in any way be treated as household waste and must be subject to a specific type of removal for this type of waste. Recycling and recovery systems are available in your area (waste removal) and  bydistributors. By taking your appliance at its end of life to a recycling facility, you will contribute to environmental conservation and prevent any harm to your health.

Tested in our laboratories

“Warranty valid from the date of purchase (receipt as proof of purchase). This warranty does not cover defects or damage caused by improper set up, incorrect use, or normal wear and tear of this product.

Support

SERVICE RELATION CLIENTS / Customer Relations Department / Servicio de Atención al Cliente / Kundenservice / Klantenafdeling

Avenue de la Motte
CS 80137
59811 Lesquin cedex

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>