BEGA 12278.4 LED Wall Luminaire for Indoor Use Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA 12278.4 LED Wall Luminaire for Indoor Use
Product Usage Instructions
Overvoltage Protection
Product Specifications
DIMENSION
Spares
Application
Installation
Cleaning Maintenance
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 12278.4 LED Wall Luminaire for Indoor Use

Product Information

Product Name: Luminaire
Model: LED-0599/930
Colour Temperature: 3000 K
Colour Rendering Index (CRI): > 90
Module Luminous Flux: 1810 lm
Luminaire Luminous Flux: 1023 lm
Luminaire Luminous Efficiency: 66.4 lm/W
Lamp Module Connected Wattage: 12.3 W
Luminaire Connected Wattage: 15.4 W
Rated Temperature: 25°C – 35°C

Product Usage Instructions

Safety

The installation and operation of this luminaire must comply with national safety regulations.
Only a qualified electrician should perform the installation and commissioning.
The manufacturer is not liable for any damage caused by improper use or installation.
Any modifications to the luminaire should be carried out by the person responsible for these modifications.

Overvoltage Protection

The luminaire is equipped with electronic components that are protected against overvoltage according to DIN EN 61547.
For additional protection against transients, it is recommended to use separate overvoltage protection components.
These components can be found on the manufacturer’s website at www.bega.com.

Product Specifications

The luminaire has a model designation of LED-0599/930 and a colour temperature of 3000 K.
It has a high colour rendering index (CRI) of over 90, ensuring accurate color reproduction.
The module luminous flux is measured at 1810 lm, while the luminaire luminous flux is measured at 1023 lm.
The luminaire has a high luminous efficiency of 66.4 lm/W, providing energy-efficient lighting.
The lamp module connected wattage is 12.3 W, and the luminaire connected wattage is 15.4 W.
The rated temperature for the luminaire is between 25°C and 35°C.

DIMENSION

Spares

In case of replacement, the luminaire requires a LED power supply unit (DEV-0189/350) and a LED module with a colour temperature of 3000 K (LED-0599/930).
Please refer to the user manual for detailed installation and maintenance instructions.

Application

Shielded wall luminaire · indoor luminaire for many lighting tasks in interior applications. The light emits upwards and downwards.

Product description

Luminaire made of aluminium alloy
Finish Colour palladium
Crystal glass, inside white 2 elongated fixing holes
Width 4.5 mm · 276 mm spacing 2 cable entries for through-wiring for mains cable up to ø 10.5 mm max. 3 × 1.5@ Connection terminal 2.5@
Earth conductor connection
LED power supply unit
220-240 V x 0/50-60 Hz
DC 170-280 V
Safety class I
r – Safety mark
c – Conformity mark
Weight: 1.6 kg
This product contains light sources of energy efficiency class(es) D

Safety
The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to
the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at: www.bega.com.

Lamp

Module connected wattage 12.3 W
Luminaire connected wattage 15.4 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 35 °C

12 278.4 K3

Module designation LED-0599/930
Colour temperature 3000 K
Colour rendering index CRI > 90
Module luminous flux 1810 lm
Luminaire luminous flux 1023 lm
Luminaire luminous efficiency 66,4 lm / W

Installation

Undo set screws and lift off luminaire housing. LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping.
Loosen earth connection (plug connection) and LED-connection between luminaire housing and mounting plate.
Lead the mains supply cable through the cable entry of the mounting plate.
Note position of application “arrow down”. Fix mounting plate with enclosed or any other suitable fixing material onto the mounting surface.
It is imperative to use the enclosed gaskets. Make earth connection.
Pull silicone sleeves over the wires and make electrical connection to the terminals.
Make earth connection (plug connection) and LED-connection between luminaire housing and mounting plate again.
Install luminaire onto the mounting plate and tighten set screws evenly.
Note position of application “arrow down”.

Cleaning Maintenance

Clean luminaire regularly with solvent-free cleansers from dirt.

Replacement of the LED module

The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools.
Disconnect the system and open the luminaire. Please follow the installation instructions for the LED module.
Inspect and, if necessary, replace the luminaire gaskets.
Defective glass must be replaced.
Close the luminaire.

Spares