JONATHAN Y JYL4045B-SET2 Cooper 26 Inch Nickel Classic French Country Iron LED Table Lamp Instruction Manual
- June 12, 2024
- JONATHAN Y
Table of Contents
JONATHAN Y JYL4045B-SET2 Cooper 26 Inch Nickel Classic French Country
Iron LED Table Lamp
Product Information
Model: JYL4045
Product Dimensions: 13 x 13 x 26H
Estimated Assembly Time: 6 minutes
Max Wattage: On/Off Type A Bulb – 60W, CFL Bulb – 13W, LED Bulb – 9W
Included Bulb: LED 9W Bulb
Parts List:
– Lamp base (1x)
– Neck (1x)
– Saddle (1x)
– Socket (1x)
– Harp (1x)
– Shade (1x)
– Final (1x)
– Bulb (1x)
Product Usage Instructions
- Inspect the item carefully before attempting to install it. If there is any damage or obvious defect, do not install it. The item may not be returned once it has been installed.
- Before using any cleaning solutions, unplug lamps. Dust shades with a feather duster or with an appropriate vacuum brush attachment. Wipe with a soft, dry cloth and clean lamp bases with methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
- Please make sure that you have all parts indicated before you begin assembly of this item. This item should be assembled on a soft surface to prevent scratching the finish during assembly.
- To reduce the risk of fire, electrical shock, or injury, follow the guideline below for safe use and installation:
- The external flexible cable or cord of this lamp cannot be replaced. If the cord is damaged, the lamp shall be destroyed.
- This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. The plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use an extension cord unless the plug can be fully inserted. Do not attempt to discard this safety feature.
- Assembly Steps:
- Be careful not to twist the power cord and tighten it securely.
- Insert the Harp (E) into the Saddle (C). Put the shade (F) on the Harp (E), then tighten the Finial (G) into the Harp (E).
- Insert the bulb (H) into the socket (D).
- Put the light on a level surface to check if everything is stable.
WARNING
INSPECT THE ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL IT. IF THERE IS ANY
DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS
BEEN INSTALLED.
CARE AND MAINTENANCE
- Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
- Please make sure that you have all parts indicated before you begin assembly of this item
- This item should be assembled on a soft surface to prevent scratching the finish during assembly
- To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation
- The external flexible cable or cord of this lamp cannot be replaced;
- If the cord is damaged, the lamp shall be destroyed
- This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
PREPARATION
- Before beginning assembly of the product, make sure all parts are present. Compare parts with the package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
- Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE”A” BULB MAX 60-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT THERE IS A LED 9-WATT BULB IN THE BOX
Step 1
- Be careful not to twist the power cord and tighten it securely.
Step2
- Insert the Harp (E) into the Saddle (C). Put the shade(F) on the Harp(E), then tighten the Finial (G)into the Harp (E) Insert the bulb(H) into the socket(D).
Step 3
- Put the light on a level surface to check if everything is stable.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>