JONATHAN Y JYL4019E Pineapple 23 Inch Classic Vintage Ceramic LED Table Lamp Instruction Manual
- June 12, 2024
- JONATHAN Y
Table of Contents
JONATHAN Y JYL4019E Pineapple 23 Inch Classic Vintage Ceramic LED Table
Lamp
Product Information
- Model: JYL4019
- Product Dimensions: 13 x 13 x 23″H
Product Description
This product is a portable lamp with a model number JYL4019. It has a lamp base, neck, saddle, harp, shade, finial, socket, and a bulb. The product dimensions are 13 x 13 x 23H.
Product Usage Instructions
Preparation
Before starting the assembly, ensure that all parts are present. Compare the parts with the package contents list and the hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
Important Safety Instructions
- Please make sure that you have all parts indicated before you begin assembly of this item.
- This item should be assembled on a soft surface to prevent scratching the finish during assembly.
To reduce the risk of fire, electrical shock, or injury to persons or property, please follow the guidelines below for safe use and installation:
The external flexible cable or cord of this lamp cannot be replaced. If the cord is damaged, the lamp shall be destroyed. This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. Do not attempt to discard this safety feature.
WARNING: INSPECT THE ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL IT. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
- Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum brush attachment.
- Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
- Please make sure that you have all parts indicated before you begin assembly of this item
- This item should be assembled on a soft surface to prevent scratching the finish during assembly
- To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation
- The external flexible cable or cord of this lamp cannot be replaced;
- If the cord is damaged, the lamp shall be destroyed
- This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE”A” BULB MAX 60-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT THERE IS LED 9-WATT BULB IN THE BOX.
Step 1
- Pull power cord to connect the Neck (B) to the Base (A).
- Screw the Neck (B) onto the Lamp base (A)
- Be careful not to twist the power cord and tighten securely
Step 2
- Insert the Harp (E) into the Saddle (C).
- Put the shade(F) on the Harp(E), then tighten the Finial (G)into the Harp (E)
- Insert the bulb(H) into the socket(D).
Step 3
- Put the light on a level surface to check if everything is stable.
ENJOY YOUR LAMP
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>