MOEN INS12942 Stainless Steel Drop In or Undermount Sink Instruction Manual
- June 12, 2024
- Moen
Table of Contents
- MOEN INS12942 Stainless Steel Drop In or Undermount Sink
- Product Information
- Product Usage Instructions
- OPTION A: DROP-IN SINK INSTALLATION INSTRUCTIONS
- OPTION B: UNDERMOUNT SINK INSTALLATION INSTRUCTIONS
- Moen Limited Lifetime Warranty
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
MOEN INS12942 Stainless Steel Drop In or Undermount Sink
Here is the detailed product information and usage instructions for the given text-extract:
Product Information
The product in question is a faucet manufactured by Moen. It is designed for installation in various settings and comes with a limited lifetime warranty.
Product Usage Instructions
Before proceeding with the installation or in case of missing or replacement parts, it is recommended to contact Moen for assistance. The contact details are as follows:
- (USA) 1-800-BUY-MOEN (1-800-289-6636)
- (Canada) 1-800-465-6130
- Website: www.moen.com
- Website (Canada): www.moen.ca
Moen also suggests the use of helpful tools for safety and ease of faucet replacement. These tools are not explicitly mentioned in the text-extract, but it is advisable to consult the user manual or contact Moen for specific tool recommendations.
The user manual references different figures and labels, but without the complete context, it is challenging to provide specific instructions based on these references.
For routine cleaning, Moen recommends the following:
- Smears and fingerprints: Use a mild soap solution and a soft cloth.
- Persistent spots and stains: Use denatured alcohol.
- Hard water spots and scale: Use a mixture of equal parts water and vinegar.
- Rusty discoloration and atmospheric stains: Contact Moen for further assistance.
It is important to note that certain cleaning agents or techniques should not be used on the product, but specific details are not provided in the text- extract. It is advisable to consult the user manual or contact Moen for a comprehensive list of what not to use.
If there are any concerns or issues with the product, Moen offers a limited lifetime warranty. For warranty claims or further information, it is recommended to contact Moen directly.
HELPFUL TOOLS
For safety and ease of faucet replacement, Moen recommends the use of these
helpful tools.
HELPFUL TOOLS
For safety and ease of faucet replacement, Moen recommends the use of these
helpful tools.
OPTION A: DROP-IN SINK INSTALLATION INSTRUCTIONS
Parts List
- A. Sink
- B. Mounting Bolt
- C. Mounting Clip
Position sink upside down on counter and trace outline.
Draw cut line 5/16″ inside the sink outline.
Drill pilot holes on cut line.
Carefully cut counter hole following inside of the cut line. Remove counter material.
Install faucet and drain fittings and accessories according to manufacturer’s instructions
Insert mounting clip (C) onto mounting bolt (B) and secure until tight.
Insert mounting hardware onto sink mounting rails along each side as illustrated. 10 total mounting hardware included.
Apply a bead of caulk 1/s”-¼” away from edge of counter cutout.
Center sink within counter opening. Apply even pressure to all sides. Wipe away any excess caulk on counter.
Tighten installation screws in order as shown above.
Connect faucet and drain fittings.
OPTION B: UNDERMOUNT SINK INSTALLATION INSTRUCTIONS
A fabricator can use the enclosed paper pattern to create the countertop holes for sink and/or faucet.
Turn countertop upside down and align the bowl to countertop cutout.
Determine location for mounting brackets; space evenly around the underside. Mounting holes should be 1/2″ out from the edge of the sink ledge.
Drilling and anchoring may be required at this stage of installation. Locate and drill the mounting holes [following the countertop manufacturer’s instructions) as shown. Holes should allow even spacing of mounting brackets around the sink. Type of fasteners to be as recommended by countertop supplier.
Clean underside of countertop and top rim of sink thoroughly.
Apply a bead of caulk 1/8″ -1/4″ away from edge of counter cutout and then
align sink on counter.
Caulk not included. Consult your professional installer. Sealants may vary.
Attach mounting hardware. Consult your professional installer. Hardware can vary. Position brackets so that bracket edge overlaps sink ledge and finish installing mounting hardware
Tighten brackets evenly. Do not overtighten.
Turn countertop and sink attached right side up.
Complete counter installation and wipe away any excess caulk from sink rim.
Connect faucet and drain fittings.
Stainless Steel Sink Cleaning Recommendations: If maintained properly, your Moen® stainless steel kitchen sink will not chip, peel, rust or discolor. The following chart illustrates our recommendations for maintaining the original appearance of your new Moen® stain-less steel kitchen sink.
SITUATION | CLEANING RECOMMENDATION |
---|---|
Routine Cleaning: | Soap, ammonia, detergent and water. Rub with a sponge |
or cloth followed by a thorough rinsing, then dry.
Smears and fingerprints:| Use window or glass cleaner. Rub with a cloth.
Persistent spots and stains:| Stainless steel cleaner. Apply with a
sponge or cloth. Rub back and forth in direction of grain lines. Rinse with
clean water and dry. NOTE: Not for mirror finishes.
Hard water spots and scale:| Vinegar (full strength). Swab and soak
for 5-10 minutes. Rub, then rinse with a neutralizer such as baking soda
solution. Rinse with clean water and dry.
“Rusty” discoloration and atmospheric stains:| Use any of the
cleaning agents listed above. Swab with a cloth and soak for 5 minutes. If
necessary, rub with a nylon pad. Rinse with clean water and dry.
What not to use:| Do not use steel wool pads. This can cause rust or
pitting of the sink surface.
In addition to the above cleaning recommendations, we suggest you try to avoid leaving rubber mats, wet sponges, cloths and cleaning pads to sit in the sink or liquid soap to dry on the surface. Food particles and deposits can cause discoloration. Many detergents contain chemi-cals that can dull the finish, cause pitting or staining. Avoid using bleach — even diluted this can cause corrosion if left for extended periods of time. If bleach comes in contact with your sink, rinse thoroughly. Hard water or water with high iron content may cause a brown, rust-like stain. Water with a high concentration of minerals or over-softened water may cause a white film. If either condition exists, dry the sink with a soft towel after each use.
Moen Limited Lifetime Warranty
Moen® products have been manufactured under the highest standards of quality and workmanship. Moen warrants to he original consumer purchaser for as long as the original consumer purchaser owns their home (the “Warranty Period” for homeowners), that this sink will be free from defects in materials and manufacturing workmanship.
This warranty is extensive in that it covers replacement of all defective
parts. However, damage due to installation error, product abuse, product
misuse, or use of cleaners not in compliance with included stainless steel
sink cleaning recommendations instructions, whether performed by a contractor,
service company, or yourself, are excluded from this warranty. Moen will not
be responsible for labor charges and/ or damage incurred in installation,
repair or replacement, not for any indirect, incidental or consequential
damages, losses, injury or costs of any nature relating to this faucet.
Except as provided by law, this warranty is in lieu of and excludes all other
warranties, conditions and guarantees, whether expressed or implied, statutory
or otherwise, including without restriction those of merchantability or of
fitness for use.
Some states, provinces and nations do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state, province to province, nation to nation. Moen will advise you of the procedure to follow in making warranty claims. Simply write to Moen Incorporated using the address above. Explain the defect and include proof of purchase and your name, address, area code and telephone number.
Moen Incorporated
25300 Al Moen Drive
North Olmsted, Ohio 44070-8022
U.S.A.
Moen de Mexico, S.A. de C.V.
Carretera Saltillo-Monterrey KM 14.7
Ramos Arizpe, Coahuila
Mexico 25900
Moen Inc.
2816 Bristol Circle
Oakville, Ontario L6H 557
Canada+
INS12942A- 06/23
©2023 Moen Incorporated
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>