EROAD DP C030.CA bcd Display For Maximum Fun User Manual

: September 20, 2024
: EROAD

DP C030.CA bcd Display For Maximum Fun

“`html

Product Information

Specifications

Model: DP C030.CA (EROAD)
Bluetooth: Bluetooth 5.0 BLE
Ant+ Function: Supports LEV, Speed&Cadence, Bike Power
profiles

Product Usage Instructions

Introduction of Display

The display provides essential information about your e-bike’s
performance and settings.

Product Description

The display features a headlight, Bluetooth connectivity,
maintenance information, battery indicator, real-time speed
display, power-assisted mode selection, power curve, and data
switch.

Control Buttons Overview

Down/Walk Assistance: Use to select items in the menu.
Up/Headlight: Controls the headlight.
On/Off/Confirm: Power on/off and confirm selections.

Normal Operation

Power ON/OFF

To power on, press and hold the designated button for 2 seconds
when the display is off. To power off, press and hold the button
for 2 seconds when the display is on.

Select the Power-Assisted Mode

Use the designated buttons to switch between power-assisted
modes (ECO, TOUR, SPORT, SPORT+, BOOST) and adjust the motor power.
The default mode is ECO.

View the Data

In the main interface, use the buttons to switch between
different data displays.

Adjust the Headlight/Backlight

Adjust the headlight or backlight settings as needed.

Walk Assistance

Enable walk assistance mode for easy maneuvering of the e-bike
at low speeds.

Bluetooth Function

Connect the display with BAFANG GO+ using Bluetooth for
additional functionalities. Refer to the app operation instructions
for detailed functions.

ANT+ Function

The display supports ANT+ function for real-time riding data
transmission. Connect compatible devices like cycle computers and
watches to view data broadcasted by the display.

Frequently Asked Questions (FAQ)

Q: How do I reset the trip on the display?

A: To reset the trip, navigate to the settings menu and select
“Reset Trip” option.

Q: Can I change the display from Imperial to Metric units?

A: Yes, you can change the units by accessing the settings menu
and selecting “Imperial/Metric” option.

“`

7 USER MANUAL FOR DP C030.CA (EROAD)

USER MANUAL FOR DISPLAY

CONTENT

7.1 Important Notice

2

7.7 Settings

9

7.2 Introduction of Display

2

7.7.1 “Imperial” / “Metric”

9

7.3 Product Description

3

7.7.2 Set the Auto Off Time

10

7.3.1 Specification

3

7.7.3 Set the Backlight

10

7.3.2 Functional Overview

3

7.7.4 Set the Light Sensitivity

10

7.4 Display Overview

4

7.7.5 Reset the Trip

11

7.5 Control Buttons Overview

5

7.7.6 Service Tips

11

7.6 Normal Operation

6

7.7.7 View the Battery Info

12

7.6.1 Power ON/OFF

6

7.7.8 View the HMI Info

12

7.6.2 Select the Power-Assisted Mode

6

7.7.9 View the Controller Info

12

7.6.3 View the Data

7

7.7.10 View the Sensor Info

13

7.6.4 Adjust the Headlight/backlight

7

7.7.11 View Historical Error Codes

13

7.6.5 Walk Assistance

8

7.7.12 View Historical Warn Codes

13

7.6.6 Bluetooth Function

8

7.8 ERROR CODE DEFINITION

14

7.6.7 ANT+ Function

9

BF-UM-C-DP C030.CA-EN June 2024

1

7.1 IMPORTANT NOTICE

· If the error information from the display cannot be corrected according to the instructions, please contact your retailer.
· The product is designed to be waterproof. It is highly recommended to avoid submerging the display under water.
· Do not clean the display with a steam jet, high-pressure cleaner or water hose.
· Please use this product with care.
· Do not use thinners or other solvents to clean the display. Such substances can damage the surfaces.
· Warranty is not included due to wear and normal use and aging.
· Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
· This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

· This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver.(3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.(4) Consult the dealer or an experienced radio/TV technician for help.

7.2 INTRODUCTION OF DISPLAY

· Model: DP C030.CA
· The housing is made of PC/silicone and the LCD screen is made of aluminosilicate glass.

2

BF-UM-C-DP C030.CA-EN June 2024

· The label marking is as follows:

USER MANUAL FOR DISPLAY

7.3 PRODUCT DESCRIPTION

7.3.1 Specification · LCD screen · Power supply: 36/43/18Vdc · Operating temperature: -20~45 · Storage temperature: -20~60 · Waterproof: IPX6 · Storage Humidity: 30%-70% RH
BF-UM-C-DP C030.CA-EN June 2024

7.3.2 Functional Overview
· CAN communication protocol; Easy and user-friendly operation with three buttons.
· Speed indication: including real-time speed, maximum speed “MAX” and average speed “AVG”.
· Metric/imperial switch: Mileage unit can be set according to user’s habit.
· Smart power indication: Provides stable battery percentage alerts through optimized algorithms.
· Automatic control of light-sensing headlight · Backlight brightness 4-level adjustment · Power-assisted modes: 6 modes in total · Mileage indication: The maximum mileage
can be displayed up to 99999. Single mileage can be shown as Trip; accumulated mileage can be shown as ODO. · Smart indication: remaining mileage can be shown as RANGE, energy consumed can be shown as Cal (calories). · Error code indication. · Walk assistance. · Maintenance prompt. · ANT+ · 6 languages: English, German, Dutch, French, Italian, Czech.
3

7.4 DISPLAY OVERVIEW

(1) (2) (3)

(4)

1 Headlight

2 Bluetooth

3 Maintenance

(5)

4 Battery

5 Real-time speed

6 Power-assisted mode

(6)

7 Power curve

8 Data switch

(7) (8)

4

BF-UM-C-DP C030.CA-EN June 2024

USER MANUAL FOR DISPLAY

7.5 CONTROL BUTTONS OVERVIEW

(1)

(2)

(3)

(1)

“”

Down/Walk Assistance

Press ” “/” ” to select your desired item on

(2)

“”

Up/Headlight

the menu.

(3)

“”

On/Off/Confirm

· Power on/off the HMI. · Confirm your selection

BF-UM-C-DP C030.CA-EN June 2024

5

7.6 NORMAL OPERATION
7.6.1 Power ON/OFF Power ON: Press and hold ” ” ( 2s) when the HMI is OFF. Power OFF: Press and hold ” ” ( 2s) when the HMI is ON to power OFF the HMI.

7.6.2 Select the Power-Assisted Mode

press ” ” or ” ” to switch the power-assisted mode and change the power of the motor. The lowest gear is ECO, and the highest gear is BOOST (user setable). The default mode is ECO; OFF means the e-bike is in neutral position.

ECO TOUR SPORT SPORT+ BOOST

Green Blue Indigo Orange Purple

6

BF-UM-C-DP C030.CA-EN June 2024

USER MANUAL FOR DISPLAY

7.6.3 View the Data In the main interface, press the ” ” to enter the interface. Press the ” ” to switch data displays.

7.6.4 Adjust the Headlight/backlight
· Press and hold (2s) ” ” to turn on the headlight, the backlight luminance (4 levels, user-setable) of the HMI will decrease, and the light icon appears.
· Press and hold the ” ” again to turn off the headlight, the HMI backlight luminance will increase, and the light icon will disappear.

BF-UM-C-DP C030.CA-EN June 2024

7

7.6.5 Walk Assistance
When the system not in operation, press the ” ” to switch the mode to OFF, and then press the ” ” again, and the symbol ” ” will appear and be normally on. Press and hold the ” “, the symbol ” ” will flash (frequency 500ms), and the e-bike will go into walk assistance mode (If no speed signal is detected, the HMI will display a speed of 2.5 km/h). Release the ” ” to exit from the walk assistance mode, and the symbol ” ” will stop flashing and be will normally on. If no operation within 5s, the mode will be automatically switched to OFF mode.

7.6.6 Bluetooth Function The HMI is equipped with Bluetooth 5.0 BLE module, and can be connected with BAFANG GO+. For detailed functions, see the corresponding App operation instruction. Download, install and connect BAFANG GO+ : Android: Go to Google Store and search for BAFANG GO+ to download and install. iOS: Go to Apple Store and search for BAFANG GO + to download and install. Scan the QR code shown below with your mobile phone to download and install BAFANG GO+.
Android Download Address iOS Download Address

8

BF-UM-C-DP C030.CA-EN June 2024

USER MANUAL FOR DISPLAY

7.6.7 ANT+ Function The HMI ANT+ function supports 3 profiles, LEV (Light Electric Vehicle), Speed&Cadence, and Bike Power. When you use the function, the HMI will broadcast the system information outwardly as a sensor periodically. To view the corresponding real-time riding data, the user can connect the equipments supporting ANT+, including cycle computers and watches, to the HMI.
7.7 SETTINGS
Press and hold the ” ” and ” ” at the same time to enter “Setting”. Press ” ” or ” ” to select “HMI Setting”, “Information”, “Language” or “EXIT,” and press ” ” to enter.
7.7.1 “Imperial” / “Metric” Go to the “Setting” menu, press ” ” or ” ” to select “Unit”. Press ” ” to enter the setting, press ” ” or ” ” to select “Metric”/”Imperial”, and press ” ” to save and return to “Unit.” To save and return to the main interface, press and hold ” ” and ” ” at the same time.

BF-UM-C-DP C030.CA-EN June 2024

9

7.7.2 Set the Auto Off Time Go to the “Setting” menu, press ” ” or ” ” to select “Auto Off”. Press ” ” to enter the setting, press ” ” or ” ” to select “OFF” / “1 Min” / “2 Min” / “3 Min” / “4 Min” / “5 Min” / “6 Min” / “7 Min” / “8 Min” / “9 Min” / “10 Min”, and press the ” ” to save and return to “Auto Off”. To save and return to the main interface, press and hold ” ” and ” ” at the same time. “OFF” means to cancel the automatic shutdown function.
7.7.3 Set the Backlight Go to the “Setting” menu, press ” ” or ” ” to select “Brightness”. Press ” ” to enter the setting, ” ” or ” ” to select “100%”/”75%”/”50%”/”25%”, and press ” ” to save and return to “Brightness”. To save and return to the main interface, press and hold ” ” and ” ” at the same time.

7.7.4 Set the Light Sensitivity
Go to the “Setting” menu, press ” ” or ” ” to select “AL sensitivity”. Press ” ” to enter the setting, press ” ” or ” ” to adjust the light sensitivity, “OFF”/”1″/”2″/”3″/”4″/”5”. “OFF” means to turn off the function. The numbers 1 through 5 correspond to different levels of light sensitivity, from weak to strong. Press ” ” to save and return to “AL sensitivity”. To save and return to the main interface, press and hold ” ” and ” ” at the same time.

10

BF-UM-C-DP C030.CA-EN June 2024

USER MANUAL FOR DISPLAY

7.7.5 Reset the Trip
Go to the “Setting” menu, press ” ” or ” ” to select “Trip reset”. Press “Power button” to enter the setting, press ” ” or ” ” to select “NO”/”YES” (“YES” means to clear, “NO” means not to clear), and press ” ” to save and return to “Trip reset”. To save and return to the main interface, press and hold ” ” and ” ” at the same time. Note: TIME data will be clear with Trip data reset.

7.7.6 Service tips
Go to the “Setting” menu, press ” ” or ” ” to select “Service tips”. Press ” ” to enter the setting, press ” ” or ” ” to select “OFF”/”ON” (“OFF” means to turn off the function; “ON” means to turn on the function). Press ” ” to save and return to “Service”. To save and return to the main interface, press and hold ” ” and ” ” at the same time.
Note: The maintenance prompt function is turned off by default. When it is turned on and the ODO of the e-bike exceeds 5,000 km, ” ” will appear on the HMI.

BF-UM-C-DP C030.CA-EN June 2024

11

7.7.7 View the Battery Info Go to the “Information” menu, press ” ” or ” ” to select “Battery Info”. Press ” ” to enter. Press ” ” to view the battery information. Select “Back”, and press ” ” to return to “Battery Info”. To save and return to the main interface, press and hold ” ” and ” ” at the same time. Or press the power button to return to “Information”.
7.7.8 View the HMI Info Go to the “Information” menu, press ” ” or ” ” to select “HMI Info”. Press ” ” to enter. Press ” ” to return to “HMI Info”. To return to the main interface, press and hold ” ” and ” ” at the same time, or press “BACK” “EXIT”.
7.7.9 View the Controller Info Go to the “Information” menu, press ” ” or ” ” to select “Controller Info”. Press ” ” to enter and Press ” ” or ” ” to view SW, HW, Wheel Size, and Speed Limit. To return to the main interface, press and hold ” ” and ” ” at the same time, or press “BACK” “EXIT”.

12

BF-UM-C-DP C030.CA-EN June 2024

USER MANUAL FOR DISPLAY

7.7.10 View the Sensor Info Go to the “Information” menu, press ” ” or ” ” to select “Sensor Info”. Press ” ” to enter. To return to the main interface, press and hold ” ” and ” ” at the same time, or press “BACK” “EXIT”.
7.7.11 View Historical Error Codes Go to the “Information” menu, press ” ” or ” ” to select “Error Code”. Press ” ” to enter and press ” ” to view the last 10 error messages, “E-Code1” to “E-Code10″. To return to the main interface, press and hold ” ” and ” ” at the same time, or press “BACK” “EXIT”. Note: For detailed information, see the error code list.
7.7.12 View Historical Warn Codes Go to the “Information” menu, press ” ” or ” ” to select “Warn Code”. Press ” ” to enter and press ” ” to view the last 10 warn messages, “W-Code1” to “W-Code10″. To return to the main interface, press and hold ” ” and ” ” at the same time, or press “BACK” “EXIT”. Note: For detailed information, see the error code list.

BF-UM-C-DP C030.CA-EN June 2024

13

7.8 ERROR CODE DEFINITION
The HMI can show the faults of Pedelec. When a fault is detected, one of the following error codes will be indicated too. Note: Please read carefully the description of the error code. When the error code appears, please first restart the system. If the problem is not eliminated, please contact your dealer or technical personnel. See Appendix B for the detailed error code list.

14

BF-UM-C-DP C030.CA-EN June 2024