Moen 5995ORB Arbor One Handle High Arc Pulldown Bar Faucet with Reflex Instructions
- May 15, 2024
- Moen
Table of Contents
Moen 5995ORB Arbor One Handle High Arc Pulldown Bar Faucet with Reflex
Product Information
Specifications:
- Product Name: Single Handle Pulldown Kitchen Faucet
- Model Number: INS10634D
- Brand: Moen
- Recommended Tools for Installation: Installation Tool, Deck Gasket, Mounting Washer, Mounting Nut, Hose Protector, Hose Weight, etc.
Product Usage Instructions
For Single Hole Applications:
- Place Deck Gasket (B) onto the base of Faucet Body (G) aligning ribs on the faucet to slots on Deck Gasket.
- Insert the faucet into the sinkhole. The handle should be installed on the right side only.
For 3 Hole Applications:
- Put Deck Plate Gasket (N) onto Deck Plate (M) and firmly snap it into place.
- Position the Deck Plate on the mounting surface and install the Faucet Body (G) in the sinkhole.
Mounting Instructions:
- Slide Mounting Washer (C) up onto Faucet Body (G) under the sink.
- Secure with the Mounting Nut (D) and tighten using the Installation Tool (A).
FAQs
-
Q: What should I do if I encounter leaks after installation?
A: Check if all connections are tightly secured. If leaks persist, contact Moen for further assistance. -
Q: Can I use this faucet with a water filtration system?
A: Yes, you can connect a water filtration system to this faucet. Ensure proper installation to maintain functionality. -
Q: How do I clean and maintain the faucet?
A: Use a soft cloth with mild soap to clean the faucet. Avoid abrasive cleaners that may damage the finish. Regular maintenance will prolong the lifespan of the faucet.
HELPFUL TOOLS
For safety and ease of faucet replacement, Moen recommends the use of these
helpful tools.
CAUTION — TIPS FOR REMOVAL OF OLD FAUCET:
Always turn the water supply OFF before removing the existing faucet or
disassembling the valve. Open the faucet handle to relieve water pressure and
ensure that complete water shut-off has been accomplished.
Icon Legend
Parts List
- A. Installation Tool
- B. Deck Gasket
- C. Mounting Washer
- D. Mounting Nut
- E. Hose Protector
- F. Hose Weight
Installation Instruction
1 Hole Option
For Single Hole Applications:
- Place Deck Gasket (B) onto the base of Faucet Body (G) aligning ribs on the faucet (if present) to slots on Deck Gasket.
- Place into a sinkhole.
NOTE: Install with a handle on the right side only.
For 3 Hole Applications:
- Place Deck Plate Gasket (N) onto Deck Plate (M)
- Firmly snap the Deck Plate Gasket onto the Deck Plate.
- Place the Deck Plate on the mounting surface and install the Faucet Body (G) in the hole on the sink.
Slide the Mounting Washer (C) up onto the Faucet Body (G) under the sink and secure with the Mounting Nut (D).
Tighten the Mounting Nut (D) with Installation Tool (A). Use a screwdriver through the hole in Installation Tool (A) to tighten firmly.
Install Hose Protector (E) finger tight.
- Attach flexible lines (K and L) to shutoff valves.
- Tighten with a wrench until secure.
Insert the small end of the Pulldown Hose (I) into the spout and feed through the Faucet Body (G).
Remove and discard the plastic cap from the end of the Pullout Hose (I).
Insert the hose into the end of the Quick Connect Adapter (J). Push until a
“click” is heard. Tug downward to test engagement.
IMPORTANT
Locate the Hose Weight Locator Mark (I1) on the Pulldown Hose (I). Install
Hose Weight (F) just above the start of loop curvature in the hose on the same
side of the hose as the locator mark. Channel Locks may be useful to securely
clamp Hose Weight (F).
Flushing
- Turn on the Hot (K) and Cold (L) water supply.
- Hold the Pulldown Hose (I) and turn on the Faucet (G), allowing the water to run for 15 seconds.
- Turn off the Faucet (G).
ATTENTION
For the best performance of your new pulldown faucet, Moen recommends the
following:
- Maintain an 8″x8″ clear area for the hose and weight to travel, free of any moveable items including (bottles, cleaning supplies, etc.). See Illustration.
- If non-moveable pipes or other fixtures are interfering, consider repositioning the weight higher on the hose.
- Periodically check to be sure no obstructions have entered this clear zone.
To enhance the performance of your pulldown or pullout wand, Moen offers the 159060 Hose Guide to isolate the hose from plumbing lines and other items under the kitchen sink. Call our Product Consultants at 800-289-6636 or visit www.moen.com to order part #159060.
- Remove the protective cap from the Spray Wand (H).
- Attach Spray Wand (H) to Pulldown Hose (I).
- Finger tighten.
Tighten Pulldown Hose (I), ush with Spray Wand (H). Do not over tighten.
Spray wand operation features for models with Power Boost™
Spray wand operation features for models without Power Boost™
- Check the operation of the spray wand. Turn on the faucet, spraywand should be in stream mode. Push and release the button on the spray wand. The spray wand should change to spray mode. To enter PowerBoost™ mode, press the top button. To exit the boost mode, turn off the faucet. Note: The spray wand will remain in the last used mode, once the faucet is turned off. Manually choose your desired spray setting as the faucet is turned back on.
- Check the operation of the spray wand. Turn on the faucet, spray wand should be in stream mode. Push and release the button on the spray wand. The spray wand should change to spray mode. To switch back to stream mode, turn the handle off and on again.
Cleaning Instructions
Spot Resist™ Stainless and Spot Resist™ Brushed Nickel Finishes:
Moen recommends cleaning the Spot Resist finish with mild soap, rinsing
thoroughly with warm water, and drying with a clean, soft cloth. Never use
cleaners containing abrasives (including abrasive sponges or steel wool),
ammonia, bleach or sodium hypochlorite, organic solvents (e.g. alcohols), or
other harsh chemicals (e.g. lime scale removers) to clean the Spot Resist
finish, as they may damage the finish. Failure to comply with these cleaning
instructions may void Moen’s warranty.
Irregular Flow
- A. Unscrew the Pulldown Hose (I) from the Spray Wand (H) and remove the screen and o-ring.
- B. Rinse debris from the screen.
- C. Reinstall the screen and o-ring as shown. Thread Pulldown Hose (I) onto Spray Wand (H) and tighten.
- D. Re-check water flow.
Moen Limited Lifetime Warranty
Moen products have been manufactured under the highest standards of quality and workmanship. Moen warrants to the original consumer purchaser for as long as the original consumer purchaser owns their home (the “Warranty Period” for homeowners), that this faucet will be leak- and drip-free during normal use and all parts and finishes of this faucet will be free from defects in material and manufacturing workmanship. All other purchasers (including purchasers for industrial, commercial, and business use) are warranted for 5 years from the original date of purchase (the “Warranty Period” for non- homeowners).
If this faucet should ever develop a leak or drip during the Warranty Period, Moen will FREE OF CHARGE provide the parts necessary to put the faucet back in good working condition and will replace FREE OF CHARGE any part or finish that proves defective in material and manufacturing workmanship, under normal installation, use, and service. Replacement parts may be obtained by calling 1-800-289-6636 (Canada 1-800-465-6130), or by writing to the address shown. Proof of purchase (original sales receipt) from the original consumer purchaser must accompany all warranty claims. Defects or damage caused by the use of other than genuine Moen parts is not covered by this warranty. This warranty applies only to faucets purchased after December 1995 and shall be effective from the date of purchase as shown on the purchaser’s receipt.
This warranty is extensive in that it covers the replacement of all defective parts and finishes. However, damage due to installation error, product abuse, prod-uct misuse, or use of cleaners containing abrasives, alcohol, or other organic solvents, whether performed by a contractor, service company, or yourself, are excluded from this warranty. Moen will not be responsible for labor charges and/or damage incurred in installation, repair, or replacement, nor for any indirect, incidental, or consequential damages, losses, injury, or costs of any nature relating to this faucet. Except as provided by law, this warranty is instead of and excludes all other warranties, conditions, and guarantees, whether expressed or implied, statutory or otherwise, including without restriction those of merchantability or fitness for use.
Some states, provinces, and nations do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitations or exclusions
may not apply to you. This warranty gives you specific legal rights and
you may also have other rights which vary from state to state, province to
province, nation to nation. Moen will advise you of the procedure to follow in
making warranty claims. Simply write to Moen Incorporated using the address
below. Explain the defect and include proof of purchase and your name,
address, area code, and telephone number.
Moen Incorporated
25300 Al Moen Drive North Olmsted, Ohio 44070-8022 U.S.A.
INS10634D – 3/20
©2020MoenIncorporated.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>