Amica WA 484 072 Front Load Washing Machine User Guide
- October 27, 2023
- Amica
Table of Contents
Amica WA 484 072 Front Load Washing Machine
Instruction
- Electronic Display
- Programme Dial
- Upper Tray
- Detergent Drawer
- Drum
- Pump Filter Cover
- Temperature button
- Spin Button
- Time Remaining
8+9. Child Lock
Dear Customer,
This Quick Start Guide is enclosed with detailed washing machine operating
instructions. Before using the appliance carefully read the Operating
Instructions, especially guidelines for safe use.
Before plugging the washing machine into the mains, remove the safety
packaging and ensure the machine is level. Do not start the washing machine
before it is properly set up.
Only wash delicate fabrics, synthetics, wool using designated programs. Such
fabrics should only be washed in the maximum load sizes recommended (see page
2.).
The correct washing machine operation extends its lifetime so make sure the
drum seal is dry (leave the door ajar after washing). Do not clean the washing
machine with harsh or abrasive detergents.
-
Preparing to wash
-
Empty pockets
Close all zips and button up duvet covers.
Wash delicate and small items in a protective mesh laundry bag.
Open the door of the washing machine by gripping the door and the door handle on the inside of the door.
Insert the sorted clothes into the washing machine: -
Cotton — max full drum.
-
Synthetics — max ½ of the drum.
-
Silk, wool — max 1/3 of the drum.
-
Close the door, press firmly against the seal.
-
-
Add detergent
- Open the detergent drawer. Pull the handle.
- Pour the recommended dose of washing detergent into the appropriate compartment of the detergent drawer.
- Add fabric conditioner to the appropriate compartment if required.
- MAIN WASH detergent.
- Fabric softener or other special care liquids. PREWASH detergent.
-
Program selections
- Set the programme selector knob to the desired programme.
- Customize the programme to your needs — you can change the temperature, spin speed, or enable additional features.
- Select additional functions. The additional functions are described on the control panel and in the “Table of Wash Programmes” (see page 2) .
-
Select START
- Close the appliance door.
- Set the programme selector dial to the desired programme (see page 2).
- Select additional functions or wash cycle parameters as required – according to your needs.
- Select time remaining ranging from 1 to 23 hours. Then press the START/ PAUSE button
-
End of the wash
- Your machine will stop by itself as soon as the programme you have selected finishes. “- -” will flash on the electronic display.
- You can open the machine’s door and
- Remove the laundry.
- Leave the door of your machine open to allow the inner part of your machine to dry.
- Switch the programme dial to STOP position. Unplug your machine.
- Turn the water tap off.
TABLE OF WASH PROGRAMMES: WA 484 072
The “Eco 40-60” program is used to wash normally soiled cotton fabrics
together, which can be washed at 40 ° C or 60 ° C on the same cycle.
The most energy and water efficient wash programmes are generally those that
run at lower temperature and for a long time.
Loading the washing machine to the full capacity indicated by the manufacturer
for the respective wash programmes will save energy and water.
NOTE:
Real water temperature may differ from the declared wash cycle temperature.
Above mentioned time is an estimate and may differ from actual wash cycle
time, depending on temperature, water pressure, load
size, etc.
The time is automatically updated during wash cycle. Displaying the same time
for an extended period or abrupt changes are normal.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>