MOEN GLYDE Two Handle 4 Inch Centerset Lavatory Faucet Instruction Manual

MOEN GLYDE Two Handle 4 Inch Centerset Lavatory Faucet

Product Information

The GLYDETM Two-Handle 4 Centerset Lavatory Faucet is available in multiple versions. The dimensions of each version are as follows:

• Option 1: 4 inches (102 mm)
• Option 2: 2-7/8 inches (72 mm)
• Option 3: 4-3/8 inches (111 mm)
• Option 4: 5-7/8 x 4-1/4 inches (149 mm x 108 mm)

The faucet is designed to be installed through three holes with a minimum diameter of 1 inch (25 mm). The package includes a pop-up waste and is available in Models 6172 series and 66172 (bulk).

The critical dimensions of the faucet are not to scale. For more information, visit www.moen.cn or call 400-630-8866.

Product Usage Instructions

To install the GLYDETM Two-Handle 4 Centerset Lavatory Faucet, follow these steps:

1. Identify the version of the faucet you have based on the dimensions provided in the manual.
2. Ensure that you have three holes with a minimum diameter of 1 inch (25 mm) for installation.
3. Attach the faucet to the sink using the supplied hardware.
4. Connect the hot and cold water supply lines to the corresponding NPT connections using a wrench.
5. Install the lift rod by attaching it to the drain assembly and positioning it at a minimum distance of 2-1/2 inches (64 mm) from the backsplash.
6. Test the faucet for leaks by turning on the water supply and checking all connections.

There is more than one version of this model. Page down to identify the version you have.

DESCRIPTION

• Metal construction with various finishes identified by suffix

•  1/2″ IPS connections

• Hot and cold temperature indicators available

• Installation through 3 holes, 1″ min. diameter, and 4″ on center

• Includes metal pop-up waste assembly (6172)

• Includes 50% metal/50% plastic waste assembly (66172) OPERATION

• Lever style handles with optional hot & cold indicators available

• Maximum handle rotation angle is 90° to full on for either handle

• Hot side counterclockwise to open (clockwise to close)

• Cold side clockwise to open (counterclockwise to close)
  FLOW

• Water usage is lilmited to these maximum flow rates as indicated by the corresponding product markings

• 1.2 gpm max (4.5L/min) at 60 psi
  CARTRIDGE

•  1234 cartridge design

• Nonmetallic, nonferrous and stainless steel material STANDARDS

•  Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1, and all applicable requirements referenced therein

•  Certified to NSF 61/9 & 372

• Products marked with 1.2 gpm are compliant with California water efficiency regulations

• Complies with California Proposition 65 and with the Federal Safe Drinking Water Act

• ADA for lever handle

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser

• 10 year warranty if used in commercial installations

•  5 year warranty if used in commercial installations Visit www.moen.com/support for complete details and limitations
  OPTIONS (See Illustrated Parts page)

• Thin and thick deck mounting hardware kits available

Specifications

GLYDE™

Two-Handle 4″ Centerset Lavatory Faucet

Models: 6172 series and 66172
(bulk) includes pop-up waste

NOTE: THIS FAUCET IS DESIGNED TO BE IN STALLED THROUGH 3 HOLES, 1″ MIN. DIA.

©2022 Moen Incorporated
400-630-8866
www.moen.cn

References

• Moen摩恩-龙头,水槽,花洒,浴室柜.智能马桶-Moen摩恩中文官网
• Warranty Information | MOEN

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>