MOEN 100710 Posi Temp One Handle Tub and Shower Replacement Knob Handle Kit Instructions
- May 15, 2024
- Moen
Table of Contents
Finish Care and Cleaning Instructions
100710 Posi Temp One Handle Tub and Shower Replacement Knob Handle Kit
LifeShine® Finishes:
Brushed Nickel Classic Brushed Nickel Brushed Gold
Classic Stainless Polished Nickel Polished Brass
Satine Stainless Bronzed Gold
General Cleaning Instructions:
A damp cloth and mild liquid dishwashing soap may be used for a limited amount
of time, followed by rinsing with water and drying with a soft cloth. Most
common household cleaners (including mild abrasives) can be used, when used in
accordance with the manufacturers’ instructions for use. However, all cleaners
should be rinsed off thoroughly with water immediately after cleaning your
faucet. Avoid using any harsh cleansers (e.g., lime scale removers) or
pads/sponges that are unsafe for polished metallic surfaces.
Most green, fibrous pads/-sponges contain microscopic mineral particles that
can scratch a faucet’s finish. Cleaner manufacturers may change their
formulations at any time; therefore, Moen does not recommend any specific
cleaner.
Moen suggests the periodic application of a quality furniture polish for matte
or textured finishes . Alternatively non-abrasive wax, such as car wax or
furniture wax may be used. Furniture polish or wax may result in a slight
color change, but will not harm the finish. Polish or wax can be tested on a
less visible surface first. For faucets with clear knob style handles,
cleaners should be approved for acrylics and used in accordance with the
manufacturers’ instructions for use. Cleaners should be rinsed off thoroughly
with water immediately after cleaning.
Removing Dried Water Spots:
To remove water spots a 50/50 blend of household vinegar and water can also be
used, followed by rinsing with water and drying with a soft cloth.
Failure to comply with these cleaning instructions may void Moen’s warranty.
Non-LifeShine® Finishes:
Chrome Brushed Chrome Platinum
A damp cloth and mild liquid dishwashing soap may be used, followed by rinsing
with water and drying with a soft cloth. Most common household cleaners
(including mild abrasives for Brushed Chrome and Platinum) can be used, when
used in accordance with the manufacturers’ instructions for use. However, all
cleaners should be rinsed off thor- oughly with water immediately after
cleaning your faucet. Avoid using any harsh cleans- ers (e.g., lime scale
removers) or pads/sponges that are unsafe for polished metallic surfaces. Most
green, fibrous pads/sponges contain microscopic mineral particles that can
scratch a faucet’s finish. Cleaner manufacturers may change their formulations
at any time; therefore, Moen does not recommend any specific cleaner.
Moen suggests the periodic application of a quality non-abrasive wax, such as
car wax or furniture wax, especially for matte or textured finishes (e.g.,
Brushed Chrome or Plati-num).
For faucets with clear knob style handles, cleaners should be approved for
acrylics and used in accordance with the manufacturers’ instructions for use.
Cleaners should be rinsed off thoroughly with water immediately after
cleaning.
Removing Dried Water Spots:
A 50/50 blend of household vinegar and water can also be used for a limited
amount of time, followed by rinsing with water and drying with a soft cloth.
Failure to comply with these cleaning instructions may void Moen’s warranty.
Non-LifeShine® Finishes:
Glacier Ivory Matte Black Mediterranean Bronze
Oil Rubbed Bronze
Oil Rubbed Bronze with Microban
Old World Bronze Wrought Iron
A damp cloth and mild liquid dishwashing soap may be used, followed by rinsing
with water and drying with a soft cloth. Most common household cleaners
(including mild abrasives) can be used, when used in accordance with the
manufacturers’ instructions for
use. However, all cleaners should be rinsed off thoroughly with water
immediately after cleaning your faucet. Avoid using cleaners containing
abrasives (including abrasive sponges or steel wool), organic solvents (e.g.,
alcohols), or other harsh cleansers (e.g.,
lime scale removers). Cleaner manufacturers may change their formulations at
any time; therefore, Moen does not recommend any specific cleaner.
For faucets with clear knob style handles, cleaners should be approved for
acrylics and used in accordance with the manufacturers’ instructions for use.
Cleaners should be rinsed off thoroughly with water immediately after
cleaning.
A 50/50 blend of household vinegar and water can also be used for a limited
amount of time, followed by rinsing with water and drying with a soft cloth.
Failure to comply with these cleaning instructions may void Moen’s warranty.
Non-LifeShine® Finishes:
Spot Resist Brushed Nickel
Spot Resist Stainless ~ Spot Resist Stainless with Microban
A damp cloth and mild liquid dishwashing soap may be used, followed by rinsing
with water and drying with a soft cloth. Never use cleaners containing
abrasives (including abrasive sponges or steel wool), ammonia, bleach or
sodium hypochlorite, organic solvents (e.g., alcohols) or other harsh
chemicals (e.g., lime scale removers) to clean to Spot Resist® finish, as they
may damage the finish.
For faucets with clear knob style handles, cleaners should be approved for
acrylics and used in accordance with the manufacturers’ instructions for use.
Cleaners should be rinsed off thoroughly with water immediately after
cleaning.
A 50/50 blend of household vinegar and water can also be used for a limited
amount of time, followed by rinsing with water and drying with a soft cloth.
Failure to comply with these cleaning instructions may void Moen’s warranty.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>