Hukoro F41824-BZ 30.91 Inch 4-Light Bronze Vanity Light Instruction Manual
- June 12, 2024
- Hukoro
Table of Contents
Hukoro F41824-BZ 30.91 Inch 4-Light Bronze Vanity Light
ASSEMBLY INSTRUCTIONS
CAUTION
- Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation
- Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
TOOLS REQUIRED
HARDWARE INCLUDED
PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE
EXPLODED PARTS
INSTALLATION
- STEP 1 Unscrew the ball nuts from the mounting unit. Use the mounting screws to attach the mounting unit to the junction box (not included).
- STEP 2 Make the electrical connection from the junction box (not included) to the fixture. Connect the ground wire to the mounting unit using the preinstalled green ground screw. Next, connect the positive, negative and ground wires with the supplied wire nuts. Secure with electrical tape.
- STEP 3 Attach the fixture to the mounting unit through screw holes as shown, and secure it with ball nuts.
- STEP 4 Remove the socket rings from the socket. Attach the glass shade onto fixture using socket rings.
- STEP 5 Install bulbs (not included).
If you need further assistance, please contact us by Email: customersupport@superiordecorinc.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>