Hukoro NF51436-02i Goo 6 Light 16 Inch Geometric Lantern Pendant Light Instruction Manual

October 30, 2023
Hukoro

Hukoro NF51436-02i Goo 6 Light 16 Inch Geometric Lantern Pendant Light

Hukoro-NF51436-02i-Goo-6-Light-16-Inch-Geometric-Lantern-Pendant-Light-
product

Product Information

This product is a light fixture that includes an iron rack, chain, mounting unit, and canopy. It requires assembly and installation, and the following tools are required: ladder, safety glasses, electrical Phillips screwdriver, flat blade screwdriver, pliers, and wire strippers.

Hardware included in the package are fixture, ball nuts, mounting screws, wire nuts, screw collar, mounting unit screws, chain, ring, iron rack, and canopy. The product requires bulbs to be installed (bulbs not included).

Assembly Instructions

CAUTION

  • Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.
  • Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by
    removing the fuse at the fuse box.

TOOLS REQUIRED

Hukoro-NF51436-02i-Goo-6-Light-16-Inch-Geometric-Lantern-Pendant-Light-
fig-1

HARDWARE INCLUDED

Hukoro-NF51436-02i-Goo-6-Light-16-Inch-Geometric-Lantern-Pendant-Light-
fig-2

PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE.

EXPLODED PARTS

Hukoro-NF51436-02i-Goo-6-Light-16-Inch-Geometric-Lantern-Pendant-Light-
fig-3

INSTALLATION

  1. Attach the iron rack onto fixture using ball nuts.Hukoro-NF51436-02i-Goo-6-Light-16-Inch-Geometric-Lantern-Pendant-Light-fig-4
  2. Ball Nuts Attach the end of the chain to the loop on the fixture.
  3. Use the mounting screws to attach the mounting unit to the junction box.
  4. Pass the chain and the branch wires through the screw collar ring and canopy. Feed the branch wires through the pipe nipple on the mounting unit and attach the end of the chain to the mounting unit.Hukoro-NF51436-02i-Goo-6-Light-16-Inch-Geometric-Lantern-Pendant-Light-fig-7
  5. Make the electrical connection from the junction box to the fixture. Connect the ground wire to the mounting unit using the preinstalled green ground screw. Then, connect the positive, negative and ground wires with the supplied wire nuts. Secure with electrical tapeHukoro-NF51436-02i-Goo-6-Light-16-Inch-Geometric-Lantern-Pendant-Light-fig-8
  6. Secure the canopy to the mounting unit with the screw collar ring.Hukoro-NF51436-02i-Goo-6-Light-16-Inch-Geometric-Lantern-Pendant-Light-fig-9
  7. Install bulbs (not included)Hukoro-NF51436-02i-Goo-6-Light-16-Inch-Geometric-Lantern-Pendant-Light-fig-10

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Hukoro User Manuals

Related Manuals