TRUE FINE TD130011OT Grantham 1 Light 12 Inch Black Dusk to Dawn Outdoor Barn Light Wall Sconce Instruction Manual
- October 30, 2023
- TRUE FINE
Table of Contents
- TRUE FINE TD130011OT Grantham 1 Light 12 Inch Black Dusk to Dawn Outdoor
- PRODUCT PACKAGE CONTENTS
- PRODUCT SAFETY INFORMATION
- PRODUCT PREPARATION
- PRODUCT ASSEMBLY INSTRUCTIONS
- Product Usage Instructions
- PACKAGE CONTENTS
- HARDWARE CONTENTS
- SAFETY INFORMATION
- PREPARATION
- ASSEMBLY INSTRUCTIONS
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
TRUE FINE TD130011OT Grantham 1 Light 12 Inch Black Dusk to Dawn Outdoor
Barn Light Wall Sconce
HARDWARE CONTENTS(shown actual size)
- ABA
- BBB
- CBC
- DBD
Print in china
PRODUCT PACKAGE CONTENTS
| PART | DESCRIPTION | QUANTITY |
|---|---|---|
| A | Fixture | 1 |
| B | Shade | 1 |
| C | Socket ring | 1 |
PRODUCT SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
PRODUCT PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is
missing or damaged, do not attempt to assemble the product. Estimated Assembly
Times: 25 minutes Tools
Required for Assembly (not included): Flathead screwdriver, Phillips
screwdriver, Pliers, Electrical tape, Wire cutters, Safety glasses. Helpful
Tools (not included): Wire strippers, Step ladder.
Customer Service: service@24h-reply.com
PRODUCT ASSEMBLY INSTRUCTIONS
- Attach the mounting plate (DD) to the outlet box (not included) with the long mounting screws (CC).
- Hardware Used
- CC Long mounting screw x 2
- DD Mounting plate x 1
- Strip 3/4 in. of insulation from wire ends.
- Twist stripped ends together with pliers (not included), black to black (power) and white to white (neutral). Attach copper wire to ground wire.
- Helpful hint: If necessary, attach copper ground wire to grounded outlet box.
- Attach wire nuts (BB). Tape wire nuts (BB) and wires together.
- Hardware Used
- BB Wire nut x3
- Align the 2 screws(AA) through the holes of the back plate, and fix them with screw nuts.
- Hardware Used
- DD A
- AA Long mounting screw x 2
- DD Mounting plate x 1
- Unscrew socket ring (C) from the socket, install the shade (B) and fix it with socket ring (C). Install light bulb (not included). Use one E26 bulb.
- A
- B
- C
CAUTION: To avoid any waterproofing problems, please make sure the light fixture fits the mounting surface perfectly installationand use waterproof glue around the canopy for better sealing after installation.
Product Usage Instructions
- Select a location on an exterior wall that is suitable for mounting the Outdoor Wall Sconce.
- Ensure that all parts are present and compare them with the package contents list and hardware contents list.
- If any part is missing or damaged, do not attempt to assemble the product.
- Tools required for assembly include a flathead screwdriver, Phillips screwdriver, pliers, electrical tape, wire cutters, and safety glasses. Wire strippers and a step ladder may also be helpful.
- Attach the mounting plate (DD) to the outlet box (not included) using the long mounting screws (CC).
- Strip 3/4 inch of insulation from wire ends and twist stripped ends together with pliers, black to black (power) and white to white (neutral). Attach copper wire to ground wire. If necessary, attach copper ground wire to grounded outlet box.
- Attach wire nuts (BB) and tape wire nuts (BB) and wires together.
- Align the two screws (AA) through the holes of the back plate and fix them with screw nuts.
- Unscrew socket ring (C) from the socket and install the shade (B). Fix the shade with socket ring (C).
- Install one E26 bulb (not included).
- To avoid any waterproofing problems, ensure that the light fixture fits the mounting surface perfectly and use waterproof glue around the canopy for better sealing after installation.
PACKAGE CONTENTS
| PART | DESCRIPTION | QUANTITY |
|---|---|---|
| A | Fixture | 1 |
| B | Shade | 1 |
| C | Socket ring | 1 |
HARDWARE CONTENTS
HARDWARE CONTENTS(shown actual size)
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
- TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker).
- MINIMUM 90°C SUPPLY CONDUCTORS.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is
missing or damaged, do not attempt to assemble the product.
Estimated Assembly Times: 25 minnutes
Tools Required for Assembly (not included): Flathead screwdriver ,
Phillips screwdriver, Pliers, Electrical tape, Wire cutters, Safety glasses.
Helpful Tools (not included): Wire strippers, Step ladder.
Customer Service: service@24h-reply.com
ASSEMBLY INSTRUCTIONS
-
Attach the mounting plate (DD) to the outlet box (not included) with the long mounting screws (CC).
Hardware Used
Long mounting screw
Mounting plate -
Strip 3/4 in. of insulation from wire ends. Twist stripped ends together with pliers (not included), black to black (power) and white to white (neutral). Attach copper wire to ground wire. Helpful hint: If necessary, attach copper ground wire to grounded outlet box.
-
A ttach wire nuts (BB).Tape wire nuts (BB) and wires together.
Hardware Used
Wire nut -
Align the 2 screws(AA) through the holes of the back plate, and fix them with screw nuts.
Hardware Used
Long mounting screw
Mounting plate
-
Unscrew socket ring (C) from the socket, install the shade (B) and fix it with socket ring (C).
Install light bulb (not included). Use one E26 bulb.
CAUTION: To avoid any waterproofing problems, please make sure the light fixture fits the mounting surface perfectly installation and use waterproof glue around the canopy for better sealing after installation.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>