TRUE FINE 21516OT Outdoor Wall Lantern Sconce Instruction Manual
- October 30, 2023
- TRUE FINE
Table of Contents
Instruction Manual
Outdoor Wall Sconce
PACKAGE CONTENTS
| PART | DESCRIPTION | QUANTITY |
|---|---|---|
| A | Fixture | 1 |
| B | Glass | 4 |
| C | Decorative part | 1 |
HARDWARE CONTENTS(shown actual size)
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble,
operate or install the product.
WARNING
- TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker).
- MINIMUM 90°C SUPPLY CONDUCTORS.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is
missing or damaged, do not attempt to assemble the product.
Estimated Assembly Times: 25 minnutes
Tools Required for Assembly (not included): Flathead screwdriver , Phillips
screwdriver, Pliers, Electrical tape, Wire cutters, Safety glasses.
Helpful Tools (not included): Wire strippers, Step ladder.
Customer Service: [email protected]
ASSEMBLY INSTRUCTIONS
- As shown in the figure on the right, attach bulbs, glass and decorative part into the fixture body.
Hardware Used
**** A. Fixture| x 1
---|---
B. Glass| x 4
C. Decorative part| x 1 - Attach the crossbar (DD) to the outlet box (not included) with the long mounting screws (CC).
Hardware Used
CC. Long mounting screw|
---|---
DD. Crossbar|
3. Strip 3/4 in. of insulation from wire ends.
Twist stripped ends together with pliers (not included), black to black
(power) and white to white (neutral). Attach copper wire to ground wire.
Helpful hint:
If necessary, attach copper ground wire to grounded outlet box.
- Attach wire nuts (BB).Tape wire nuts (BB) and wires together.
Hardware Used
**** BB Wire nut|
---|--- - Align the 2 screws(AA) through the holes of the back plate, and fix them with screw nuts.
Hardware Used
AA Long mounting screw|
---|---
DD Crossbar|
CAUTION: To avoid any waterproofing problems, please make sure the light fixture fits the mounting surface perfectly installation and use waterproof glue around the canopy for better sealing after installation.
Print in china