TRUE FINE TD20021W Bathroom Vanity Wall Sconce Instruction Manual
- October 30, 2023
- TRUE FINE
Table of Contents
TRUE FINE TD20021W Bathroom Vanity Wall Sconce Instruction Manual
PACKAGE CONTENTS
HARDWARE CONTENTS
(shown actual size)
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
- TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker).
- MINIMUM 90°C SUPPLY CONDUCTORS.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Times: 25 minnutes
Tools Required for Assembly (not included): Flathead screwdriver , Phillips
screwdriver, Pliers, Electrical tape, Wire cutters, Safety glasses.
Helpful Tools (not included): Wire strippers, Step ladder.
Customer Service: [email protected]
Hardware Used
1. Attach the crossbar (DD) to the outlet box (not included) with the long mounting screws (CC).
2. Strip 3/4 in. of insulation from wire ends.
Twist stripped ends together with pliers (not included), black to black
(power) and white to white (neutral). Attach copper wire to ground wire.
Helpful hint:
If necessary, attach copper ground wire to grounded outlet box.
3. Attach wire nuts (BB).Tape wire nuts (BB) and wires together.
Hardware Used
4. Place fixeture (A) onto the crossbar (DD). Secure with short mounting screws (AA).
Hardware Used
5. Install the E12 bulb and insert the glass shade (B) into the socket of the lamp holder.
Read More About This Manual & Download PDF: