TRUE FINE TD130016OT Linton 11.5 in. Oil-Rubbed Bronze LED Outdoor Wall Sconce Light Instruction Manual
- October 30, 2023
- TRUE FINE
Table of Contents
FINE TD130016OT Linton 11.5 in.
Oil-Rubbed Bronze LED Outdoor Wall Sconce Light
Instruction Manual
PACKAGE CONTENTS
| PART | DESCRIPTION | QUANTITY |
|---|---|---|
| A | Fixture body | 1 |
HARDWARE CONTENTS(shown actual size)
| | |
---|---|---|---
Short monting x4 screw| Wire nut x 3| Long monting x2 screw| Mounting plate
(Not actual size) x1
**** SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble,
operate or install the product.
**WARNING**
- TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker).
- MINIMUM 90°C SUPPLY CONDUCTORS.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is
missing or damaged, do not attempt to assemble the product.
Estimated Assembly Times: 25 minnutes
Tools Required for Assembly (not included): Flathead screwdriver , Phillips
screwdriver, Pliers, Electrical tape, Wire cutters, Safety glasses.
Helpful Tools (not included): Wire strippers, Step ladder.
Customer Service : [email protected]
ASSEMBLY INSTRUCTIONS
-
Attach the mounting plate (DD) to the outlet box(not included) with the long mounting screws (CC).
Hardware Used
(CC) Long mounting screw
(DD) Mounting plate K1
-
Strip 3/4 in. of insulation from wire ends. Twist stripped ends together with pliers (not included), black to black (power) and white to white (neutral). Attach copper wire to ground wire. Helpful hint: If necessary, attach copper ground wire to grounded outlet box.
-
Attach wire nuts (BB).Tape wire nuts (BB) and wires together.
Hardware Used
(BB) Wire nut
-
Place fixeture (A) onto the mounting plate (DD). Secure with short mounting screws (AA).
Hardware Used
(AA) Short mounting screw
(BB) Mounting plate K1
-
The lamp installation has been completed, no bulb is required.
Print in china