eMAX MAT-19B Air Cooler Instruction Manual

June 22, 2024
Emax

AIR COOLER
INSTRUCTION MANUAL
MAT-19B

Made in PRC
EIZATETAI AMO:
ROMICO J.T.TRADERS LTD
0B6g Ai6g 11, 1056 Acukwaia-KiTpog
Tnh.22430310

Warning
Thank you for purchasing our air cooler. Please read all the instructions in detail before first time use, to ensure proper use of the unit. Also, please keep the manual for future reference.

IMPORTANT SAFEGUARDS

  1. READ ALL INSTRUCTIONS BEFORE USING
  2. This appliance is only for household and indoor use only.
  3.  The appliance can be used by chiidren aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concarning use of the appliance in a safe way and understand the hazards Invoived. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
  4. Keep the appliance and its cord out of reach of children less than 8 years.
  5. Children should be supervised to ensure that they do not play with the appliance.
  6.  To protect against electric shock, keep the unit dry. Do not immerse in water or any other liquid.
  7. Unplug from outlet while filling water, before cleaning, maintaining, moving the unit or not in use.
  8. Do not insert foreign objects into the grid of air vent (intake or outlet) during operation.
  9. Do not cover the appliance with paper, cardboard, plastic, metal foil, or any other flammahte material. Otherwise, a fire may occur. Keep the appliance away from any hot sources. ,
  10. Piace the unit on a solid hot-proof horizontal surface.
  11. Water level must be between the MIN and MAX line.
  12.  After filling with water, do not tilt the unit and avoid moving it, which may cause water to overflow the sides of the tank and leak. if the unit needs to be moved a little, push on the side gently.
  13. Never turn the unit on its sides.
  14. Do not place any objects on the top of the unit. The air vent must not be obstructed during oparation.
  15. Do not use petrol, toluol, etc to clean the unit body. For slight dirt on the body, wipe it off with a soft damp cloth. For greasy dirt, squeeze a little toothpaste or mild detergent on a soft damp cloth, and then wipe the dirt off.
  16. Keep the air vent {intake or outlet} away from obstacles.
  17. Do not strike or shake the unit body during operation, otherwise, it will stop working automatically. In this case, restart the unit.
  18. After some time operation, dust and dirt may occur in water tank. It is recommended to change water and clean water tank frequently.
  19. Do not put the unit under wall socket.
  20. Empty water tank to avoid odor occuring when not in use.
  21. Do not use after the unit malfunctions. Send to service center for repair.
  22. Do not use the unit for other than its intended use.
  23. Do not use the unit when the power cord is damaged. Send to service center for repair. If the supply cord is damaged, it must be replaced by a specia! cord or assembly available from the manufacturer or its service agent.
  24. Close supervision should be exercised when children are nearby.
  25. Keep cord away from sharp or hot objects.
  26. Do not clean with metal sourcing pads. It may scratch the surface or cause electrical shock.
  27. Do not clean the unit with flammable liquid.
  28. Avoid sharing a power outlet with any other appliances.
  29. Do not use new and old batteries at the same time in remote controller.
  30. Take off batteries from remote controller when not in use.

PRODUCT FEATURES

  • Cool It cycles the water to blow cool air. It can lower the surrounding temperature and provide you a comfortable environment in hot summer.
  • Drawer style water tank, detachable filtration mesh It is easy to clean. Filter removes harmful tiny substances, such as dust and pollen.
  • Energy saving, high-efficiency, friendly environment The input power is 130W.
  • Wide range of air output 100 angle wide range of air output. 3 fan speeds: HIGH-MID-LOW
  • Remote Control 6 meters remote control, 120 angle wide range receiver
  • Beep sound reminder It has beep sound reminder function, convenient to use.
  • High grade computer control system.
  • 24 hours timer setting .

CONSTRUCTION DRAWING

ACCESSORIES LIST

sequence Accessory name Quantity(pcs)
1 remote controller 1
2 instruction manual 1
3 caster with skid 2
4 caster without skid 2

TECHNICAL PARAMETERS

MODEL EX-19B
Ratings 220-240V/ 50Hz 100W
MAX Air Flow Consumption 1600m3/h
MAX Water Volume 10L
Net Weight 7.9 KGS
Measurements 260X310X1046mm

Note: Due to constant development of our products in regards to specification and design, we take reservation for changes without prior notice.

OPERATION INSTRUCTION

  1. Pull the unit outwards from the carton and place it on a solid hot-proof horizontal surface.

  2. Check if the accessories are complete, same as the accessories list.

  3. Place the unit on a solid hot-proof horizontal surface. Take out the casters and caster wrench to assemble.
    Note: Casters with skid are for the two front holes and casters without skid are for the two back holes at the bottom of the unit.(shown as fig.1)

  4. Pull upwards the water tank and pull outwards about 10cm to the locking pin, then add water.(shown as fig.2)
    Note:
    1 Water level must be between the MIN and MAX line.(shown as fig.3)
    2  After some time operation, dust and dirt may occur in water tank. It is recommended to change water and clean water tank frequently.

  5. Only use the unit with correct AC outlet.

  6. Insert the plug pin into a wall socket. A small beep sound can be heard and the power indicator will be on.

Note:

  1. To protect against electric shock, do not remove plug from wall outlet by wet hand.
  2. Unplug from outlet while moving the unit.
  3. Insert the plug pin into the wall socket and make sure it is connected well.

CONTROL PANEL

(Remote controller control panel with the same function as the unit control panel)

ON/OFF: Press once this button to make the unit ready for working. It will start up with MID in 3 seconds and then revert to work under the memorized status. If for first time use, it will start up with MID in 3 seconds and then work with LOW. Press again this button to turn OFF.
SPEED: Press this button to select desired fan speed, LOW→MID→HIGH→LOW. in furn. At the same time can digita display 1.2.3.
LEFT AND RIGHT SWING: Press once this button to make horizontal swing of vertical louvers, the SWING indicator will be displayed. Press again for fixed air direction. To directing vertical airflow, adjust the fhorizontal louvers manuatly.
COOL: Press once this button to start the evaporative cooling function. Press again this button to cancel.
TIMER: It can be set between 24 hours, increased by 1 hours intervals.

MAINTENANCE AND CLEANING

Note: After long time operation, the filtration mesh becomes clogged with dust and dirt, which will greatly affect the unit’s performance. It is recommended to clean the filtration mesh frequently.

Cleaning the filtration mesh

  1. Remove plug from wali outlet.
  2. Catch the filtration mesh handle and pull upwards.(shown as fig.4)
  3. Clean filtration mesh with mild detergent and soft brush.
  4. Make sure filiration mesh is completely dry before installing.

Cleaning the water tank

  1. Remove plug from wall outlet.
  2. Pull out the water tank.(shown as fig.5)
  3. Clean the water tank by add clean water and empty through drain hole (unpiug the stopple of the drain holg).
  4. Putthe stopple and water tank in place after cteaning.

Cleaning the body
Clean the body with a little mild detergent on a soft cloth. Dry completely before next use.
Note:

  • Unplug from outlet before cleaning.
  • No water on the control panel.

CIRCUIT DIAGRAM

TROUBLE SHOOTING

If there is something wrong during operation, it may not be the unit’s problem.
You may check against the following fist before send for repair.

Problems Possible reasons Solutions
Not working 1.The plug is not securely inserted into the socket or not

connected well.
2. The “ON/OFF” button is not pressed.| 1. Insert the plug pin into the wall socket and make sure
it is connected well.
2. press “ON/OFF” button after plugged.
Dedust effect not good| 1. The filtration mesh is clogged with dust and dirt, which affects the unit’s performance.
2. The air vent is obstructed.| 1. Clean the filtration mesh,
2. Remove the foreign objects from the air vent.

Notice:

  1. If the problem cannot be found in the list or it persists, please contact our service center or a qualified technician for further inspection.
  2. Do NOT open and repair the unit by yourself.

Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.
Contact your loca! government for information regarding the collection systems available.
If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.

PLEASE FILL YOUR DETAILS FOR FUTURE USE

GUARANTEE CARD

CUSTOMER’S DETAILS
NAME OF BUYER
ADDRESS
TELEPHONE
DETAILS OF SHOP
NAME OF SHOP
RECEIPT VOUCHER NO.
DATE OF PURCHASE
APPLIANCE DETAILS
TYPE OF APPLIANCE
MODEL NO.
ISERIAL NO.
000020

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals