TRUE FINE TD20030FL 3 Light Flush Mount Lighting Instruction Manual

TRUE FINE TD20030FL 3 Light Flush Mount Lighting

Product Information

3-Light Flush Mount Lighting

The 3-Light Flush Mount Lighting (TD20030FL) is a ceiling light fixture that can hold three E26 bulbs with a maximum power of 60W. It comes with a metal band, canopy, mounting strap, shade, acrylic board, and screws. The fixture has a ribbed white wire, a green grounding wire, and a bare copper grounding wire.

Product Specifications

• Input Voltage: 120V
• Rated Power: 60W Max
• Lamp Socket: E26

Product Packaging

• Metal band x 3
• Canopy x 1 & Mounting strap x 1
• Screw x 2 & wire nut x 3
• Shade x 1
• Acrylic board x 1
• Lamp instruction x 1

Product Cleaning Instructions

• To clean the fixture, wipe it with a soft cloth. Clean the glass with a mild soap.
• Do not use abrasive materials such as scouring pads or powders, steel wool, or abrasive paper.

Product Safety Information

• Always switch off the electricity supply and allow the fixture to cool for 10 minutes before changing the light bulbs.

Product Usage Instructions

Assembly Instructions

1. Put the metal band (B) onto the canopy (A) and lock it with nuts.
2. Put the shade (C) on the metal band (B).
3. Install three E26 bulbs (not included).
4. Fix the mounting strap (H) to the outlet box with screw (F).
5. Connect the wires according to the wiring instructions (below).
6. Place the canopy (A) onto the outlet box and secure it with screw (G).
7. Peel off the protective cover on the acrylic board (E).
8. Gently bend the acrylic board (E) a little bit and insert it into the bottom of the shade (C) and then release it. Adjust it to make it well positioned.

Wiring Instructions

1. Insert the green grounding screw into the hole with two raised dimples on the mounting bar. Wrap the ground wire from the fixture (if supplied) around the green grounding screw, then connect it to ground wire from the outlet box (if not fixed on the outlet box) using a wire connector (not supplied). If ground wire from the fixture is not supplied, wrap the ground wire (if not fixed on the outlet box) from the outlet box around the green grounding screw and tighten it. NEVER CONNECT GROUND WIRE TO BLACK OR WHITE POWER SUPPLY WIRES.
2. Take note of the color of the wire(s) on your fixture. Identify which group your fixture wire(s) falls into and connect the wires according to the directions below:
   • [GROUP A]: Connect to Black House Wire
   • [GROUP B]: Connect to White House Wire
3. Take your fixture wire(s) from [Group A] and place evenly against the black wire from the outlet box. Do NOT twist wires together before using wire connectors.
4. Fit a wire connector over the wires and screw the connector clockwise until you feel firmness.
5. Try gently to pull the connector off the wires. If you can pull the connector off, carefully re-do steps 3 and 4 as above, and check again for a firm connection.
6. Connect the fixture wire from [Group B] to the white wire from the outlet box in the same manner. Make sure no bare wires can be seen outside wire connectors.

For further assistance

• Contact us at E-mail: [email protected]

Overview

Assembly Instruction

1. Put Metal band (B) to Canopy (A), lock it with nuts.
2. Put the shade on Metal band(B)
3. Install Bulbs (not included), need three E26 bulbs.
4. Fix Mounting strap (H) to outlet box with Screw (F).
5. Connect the wires according to the picture above.(Please refer to the wiring instruction for details )
6. Place Canopy (A) onto the outlet box, secure with Screw (G).
7. Peel off the protective cover on acrylic board(E)
8. Gently bend acrylic board(E) a little bit and insert it into the bottom of the shade and then release it. Adjust it to make it well positioned.

Wiring Instruction

1. Insert the green grounding screw into the hole with two raised dimples on the mounting bar. Wrap the ground wire from the fixture (if supplied) around the green grounding screw, then connect it to ground wire from the outlet box (if not fixed on the outlet box) using a wire connector (not supplied).If ground wire from the fixture is not supplied, wrap the ground wire (if not fixed on the outlet box) from the outlet box around the green grounding screw and tighten it. NEVER CONNECT GROUND WIRE TO BLACK OR WHITE POWER SUPPLY WIRES.
2. Take note for the color of the wire(s) on your fixture. Identify which group your fixture wire(s) falls into and connect the wires according to the directions below:
   [GROUP A]:

Connect to Black House Wire

| [GROUP B]:

Connect to White House Wire

---|---
BLACK| WHITE
PARALLEL WIRE (round & smooth)| PARALLEL WIRE (square & ridged)
WHITE OR GREY WITE TRACER| WHITE OR GREY WITHOUT TRACER
BROWN, GOLD OR BLACK

WITHOUT TRACER

| BROWN, GOLD OR BLACK

WITH TRACER

3. Take your fixture wire(s) from [Group A] and place evenly against the black wire from the outlet box. Do NOT twist wires together before using wire connectors.
4. Fit a wire connector over the wires and screw the connector clockwise until you feel firmness.
5. Try gently to pull the connector off the wires. If you can pull the connector off, carefully re-do the steps3 and4 as above, and check again for a firm connection.
6. Connect the fixture wire from [Group B] to the white wire from the outlet box in the same manner. Make sure no bare wires can be seen outside wire connectors.

Product Specifications

• Input Voltage: 120V
• Rated Power: 60W Max
• Lamp Socket: E26

Product Packaging

• Metal band x 3
• Canopy x 1 & Mounting strap x 1
• Screw x 2 & wire nut x 3
• Shade x 1
• Acrylic board x 1
• Lamp instruction x 1

Cleaning

• To clean,wipe fixture with a soft cloth. Clean glass with a mild soap.
• Do not use abrasive materials such as scouring pads or powders, steel wool or abrasive paper.

Safety Information

• Always switch off the electricity supply and allow to cool for 10 minutes before changing the light bulbs.

CONTACT US

• E-mail:[email protected]

Print in china

References

• Digital Services, Technology and Consulting | Reply

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>