TRUE FINE TD130007OT Outdoor Wall Sconce Instruction Manual
- October 30, 2023
- TRUE FINE
Table of Contents
TRUE FINE TD130007OT Outdoor Wall Sconce
Product Information
The Outdoor Wall Sconce is a lighting fixture that is designed to be mounted on an outdoor wall. The package contents include one fixture (Part A), long mounting screws, wire nuts, and a mounting plate. The fixture requires a single E26 bulb (not included) for operation.
The assembly instructions include safety information, a caution regarding waterproofing, and estimated assembly times. The required tools for assembly include a flathead screwdriver, Phillips screwdriver, pliers, electrical tape, wire cutters, and safety glasses. Helpful tools include wire strippers and a step ladder.
Product Usage Instructions
- Before beginning assembly, ensure that all parts are present and undamaged by comparing them to the package contents list and hardware contents list.
- Attach the mounting plate (DD) to the outlet box (not included) using the long mounting screws (CC).
- Strip 3/4 inch of insulation from the wire ends and twist the stripped ends together with pliers. Attach the copper wire to the ground wire and connect black to black (power) and white to white (neutral). If necessary, attach the copper ground wire to a grounded outlet box.
- Align the two screws (AA) through the holes of the back plate and fix them with screw nuts.
- Install a single E26 bulb (not included).
- Attach wire nuts (BB) and tape them together with wires.
- For waterproofing, ensure that the light fixture fits the mounting surface perfectly. Use waterproof glue around the canopy for better sealing after installation.
Please read and understand the entire instruction manual before attempting to
assemble, operate, or install the product. For any missing or damaged parts,
do not attempt to assemble the product.
If you need additional assistance, contact customer service at service@24h-
reply.com.
PACKAGE CONTENTS
| PART | DESCRIPTION | QUANTITY |
|---|---|---|
| A | Fixture | 1 |
HARDWARE CONTENTS(shown actual size)
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
- TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker).
- MINIMUM 90°C SUPPLY CONDUCTORS.
PREPARATION
- Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
- Estimated Assembly Times: 25 minnutes
- Tools Required for Assembly (not included): Flathead screwdriver , Phillips screwdriver, Pliers, Electrical tape, Wire cutters, Safety glasses.
- Helpful Tools (not included): Wire strippers, Step ladder.
ASSEMBLY INSTRUCTIONS
-
Attach the mounting plate (DD) to the outlet box (not included) with the long mounting screws (CC). Hardware Used
Long mounting screw
Mounting plate -
Strip 3/4 in. of insulation from wire ends. Twist stripped ends together with pliers (not included), black to black (power) and white to white (neutral). Attach copper wire to ground wire. Helpful hint:
If necessary, attach copper ground wire to grounded outlet box. -
Attach wire nuts (BB).Tape wire nuts (BB) and wires together.
Hardware Used
Wire nut
-
Align the 2 screws(AA) through the holes of the back plate, and fix them with screw nuts.
Hardware Used
Long mounting screw
Mounting plate -
Install light bulb (not included). Use one E26 bulb.
CAUTION: To avoid any waterproofing problems, please make sure the light fixture fits the mounting surface perfectly installation and use waterproof glue around the canopy for better sealing after installation.
Customer Service: service@24h-reply.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>