TRUE FINE TD10053FL 3 Light Flush Mount Lighting Instruction Manual
- October 30, 2023
- TRUE FINE
Table of Contents
TRUE FINE TD10053FL 3 Light Flush Mount Lighting
Product Information
The product is a 3-light flush mount lighting fixture that is designed to be installed onto an outlet box. The fixture body (A) supports the glass holder cup (B), socket ring (C), bulb (D), and glass shade (E). The mounting strap (I) is fixed onto the outlet box with a screw (H) to secure the fixture in place. The wiring connections are made using wire nuts (Smooth) to connect the fixture wires to the wires from the outlet box. The product has a green grounding screw for grounding purposes.
Product Usage Instructions
- Install the glass holder cup (B), socket ring (C), bulb (D), and glass shade (E) onto the socket in turn.
- Fix the mounting strap (I) to the outlet box with screw (H).
- Connect the wires according to the wiring instructions.
- Fix the canopy (G) to the mounting strap (I) with the canopy lock ring (F).
- To wire the fixture, insert the green grounding screw into the hole with two raised dimples on the mounting bar. Wrap the ground wire from the fixture (if supplied) around the green grounding screw, then connect it to the ground wire from the outlet box (if not fixed on the outlet box) using a wire connector(not supplied). If the ground wire from the fixture is not supplied, wrap the ground wire (if not fixed on the outlet box) from the outlet box around the green grounding screw and tighten it. NEVER CONNECT GROUND WIRE TO BLACK OR WHITE POWER SUPPLY WIRES.
- Take note of the color of the wire(s) on your fixture. Identify which group your fixture wire(s) falls into and connect the wires according to the directions below:
- [GROUP A]: Connect to Black House Wire
- [GROUP B]: Connect to White House Wire
- Take your fixture wire(s) from [Group A] and place it evenly against the black wire from the outlet box. Do NOT twist wires together before using wire connectors.
- Fit a wire connector over the wires and screw the connector clockwise until you feel firmness.
- Try gently to pull the connector off the wires. If you can pull the connector off, carefully re-do steps 3 and 4 as above, and check again for a firm connection.
- Connect the fixture wire from [Group B] to the white wire from the outlet box in the same manner. Make sure no bare wires can be seen outside wire connectors.
Product Specifications
The product packaging includes the flush mount lighting fixture, glass shade, mounting strap, canopy, canopy lock ring, socket ring, and bulb. The fixture is designed to be cleaned with a soft cloth and mild soap. Abrasive materials such as scouring pads or powders, steel wool, or abrasive paper should not be used. The product should only be installed and serviced by a qualified electrician.
Product Safety Information
Always switch off the electricity supply and allow to cool for 10 minutes before changing the light bulbs. If you have any questions or concerns about the product, please contact the manufacturer at service@24h- reply.com.
Overview
Assembly Instruction
- Install Glass holder cup (B),Socket ring (C), Bulb (D), Glass shade (E) to the socket in turn.
- Fix the Mounting strap (L) to the outlet box with Screw (K).
- Connect the wires according to the picture above. (Please refer to the wiring instruction for details )
- Fix the Canopy (H) to the Mounting strap (L) with the Canopy lock ring (G).
Wiring Instruction
-
Insert the green grounding screw into the hole with two raised dimples on the mounting bar. Wrap the ground wire from the fixture (if supplied) around the green grounding screw, then connect it to the ground wire from the outlet box (if not fixed on the outlet box) using a wire connector(not supplied). If the ground wire from the fixture is not supplied, wrap the ground wire (if not fixed on the outlet box) from the outlet box around the green grounding screw and tighten it.
NEVER CONNECT GROUND WIRE TO BLACK OR WHITE POWER SUPPLY WIRES. -
Take note of the color of the wire(s) on your fixture. Identify which group your fixture wire(s) falls into and connect the wires according to the directions below:
[GROUP A]:
Connect to Black House Wire
| [GROUP B]:
Connect to White House Wire
---|---
BLACK| WHITE
PARALLEL WIRE (round & smooth)| PARALLEL WIRE (square & ridged)
WHITE OR GREY WITH TRACER| WHITE OR GREY WITHOUT TRACER
BROWN, GOLD, OR BLACK WITHOUT TRACER| BROWN, GOLD, OR BLACK WITH TRACER
3. Take your fixture wire(s) from [Group A] and place it evenly against the black wire from the outlet box. Do NOT twist wires together before using wire connectors.
4. Fit a wire connector over the wires and screw the connector clockwise until you feel firmness.
5. Try gently to pull the connector off the wires. If you can pull the connector off, carefully re-do steps 3 and 4 as above, and check again for a firm connection.
6. Connect the fixture wire from [Group B] to the white wire from the outlet box in the same manner. Make sure no bare wires can be seen outside wire connectors.
Product Specifications
- Input voltage 120V
- Rated power 60W MAX × 3
- Lamp socket E26
- Cord Length 7ft.
Product Packaging
- Fixture body × 1
- Mounting strap × 1
- Screw × 2 & Wire nut × 3
- Glass shade × 3 & Glass holder cup × 3
- Lamp instruction × 1
Cleaning
- To clean, wipe the fixture with a soft cloth. Clean glass with mild soap. Do not use abrasive materials such as scouring pads or powders, steel wool or abrasive paper.
Safety Information
- Always switch off the electricity supply and allow to cool for 10 minutes before changing the light bulbs.
CONTACT US
E-mail:[email protected]