ASAP TECHNOLOGY WIABLK100139814 Wireless Charger User Guide
- June 17, 2024
- ASAP TECHNOLOGY
Table of Contents
ASAP TECHNOLOGY WIABLK100139814 Wireless Charger
What is in the box?
- 10W Qi Wireless Charging Pad
- A 5-ft USB-C to USB-C charging cable
- 20W PD adapter
- User Manual
Get to know your 10W Qi wireless charging pad
- Wireless Charging Pad WIABLK100139814
- Input DC 5-12V/1.5A Max.
- Output 10W/7.5W/5W
- Dimension 92mm*9mm
Compatibility
- Qi-enabled devices charge up to 10W ( 10W for Samsung models, 75W for iPhone models, 5W for any other Qi-enabled devices).
- Any Qi-compatible smartphones or devices
LED Indicator
- Blue light on for 3 seconds Connected to power
- Off Stand by for charging
- Blue light on continuously Charging device
- Blue light (flashing) Foreign object detected (Remove it before charging)
How to charge your devices.
Connect USB-C cable with Charging Pad Insert USB-C connector of charging cable to USB-C port of charging pad
Connect to Power Supply
Connect to 20W PD adapter before plugging into power outlet for power supply.
Begin to charge
-
Remove any foreign object (if any) Example: Magnet or holder
-
If there is any foreign object detected, LED indicator will be flashing.
**Thick protective case > 5mm or a case includes magnet or metallic material, may not allow proper charging function. -
Place your smartphone or any Qi-enabled device on the center of the charging pad
-
LED indicator will be on continuously during charging.
Caution
- Avoid dropping
- Do not disassemble
- No metal objects between devices and wireless charging pad.
- Thick protective case > 5mm or a case includes magnet or metallic material, may not allow proper charging function.
- Keep wireless charging pad away from any liquids or moisture
- The maximum ambient temperature during use of this product must not exceed 45°C. Do not place device in fire or other excessively hot environments.
- Use other non QC3.0 wall adapter may malfunction.
- Only use dry cloth or brush to clean this product.
- Do not use if visible defects are observed on the wireless charging pad.
Warning
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
FCC Statements
This device complies with Part 15 of the FCC Rules
Operation is subject to the following two conditions
- This device may not cause harmful interference, and
- This device must accept any interference received including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna ortransmitter.
Need help?
We’re here for you every day from 7 a.m. – 9 p.m. CST. Give us a call at
1-888-516-2630